Ulcerated plaques of the aorta as a cause of ischaemic stroke

Stroke is a second cause of mortality worldwide and a leading cause of acquired disability in adults. Approximately 20% of all ischaemic strokes are of cardioembolic origin. We present a case of a 60-year-old man with a history of stroke without changes in carotid and vertebral arteries. Echocardiography exam revealed patent foramen ovale (PFO) and abnormal echos in the aorta that were verified as advanced complex atheromas by computed tomography. Due to small size PFO was deemed insignificant and the source of embolism were most probably aortic atheromas. Patient was put on acenocumarol, aspirin and statin.     

Effect of time to infusion of autologous stem cells (24 vs. 48 h) after high-dose melphalan in patients with multiple myeloma

High‐dose melphalan (HD‐Mel) is considered the current standard of care among the preparative regimens used in autologous peripheral blood stem cell transplantation (SCT) for multiple myeloma (MM), but optimal time and schedule of administration is not defined. We retrospectively analyzed outcomes and toxicities of HD‐Mel administered on day ‐2 vs. day ‐1 before autologous stem cells infusion. A total of 138 consecutive MM patients treated at Penn State Hershey Cancer Institute between 2007 and 2010 were included in this study. No difference in time to hematopoietic recovery, common SCT‐related toxicities, and clinical outcomes was seen between patients who received HD‐Mel on day ‐2 (group A, n = 47), and those who received it on day ‐1 (group B, n = 91). Prompt and full hematopoietic recovery occurred even when stem cells were infused between 8 and 24 h after completion of chemotherapy. In the absence of prospective and randomized data, we conclude that a single I.V. infusion of HD‐Mel on day ‐1 is a safe and effective practice, and the so‐called ‘day of rest’ before the transplant appears not to be necessary.     

The design,synthesis and catalytic performance of vanadium-incorporated mesoporous silica with 3D mesoporous structure for propene epoxidation

V-containing mesoporous silica with 3D structure was prepared by a hydrothermal procedure using NH₄VO₃ as the vanadium precursor and with varied reaction mixture pH values (pH = 3 and pH = 5). The combined use of DR UV-vis and H₂-TPR techniques confirmed the successful incorporation of vanadium into the structure of the mesoporous silica material. The number of acid sites, evidenced by ammonia TPD, strongly correlates with the vanadium content. Propene oxidation with N₂O revealed the noticeable activity of the synthesised vanadium-containing mesoporous materials in epoxidation reactions. The activity of the synthesized vanadosilicates is compared with the performance of vanadium-supported catalysts (on mesoporous silica of 3D structures) prepared by wet-impregnation method. On the basis of TOF analysis indicating the activity of particular vanadium ions, it was evidenced that although the presence of isolated V species is crucial in propene epoxidation, the availability of the active species is of paramount importance for proper vanadium utilization.

Novel promising vanadium catalysts based on mesoporous silica of 3D structure, namely KIT-6, SBA-12, and MCF, for the direct propene epoxidation with N₂O.     

Magnetic resonance spectroscopy and molecular studies in ornithine transcarbamylase deficiency novel mutation c.802A>G in exon 8 (p.Met268Val)

Ornithine transcarbamylase (OTC) deficiency, an X-linked, semidominant disorder, is the most common inherited defect in ureagenesis, resulting in hyperammonaemia type II. The OTC gene, localised on chromosome X, has been mapped to band Xp21.1, proximate to the Duchenne muscular dystrophy (DMD) gene. More than 350 different mutations, including missense, nonsense, splice-site changes, small deletions or insertions and gross deletions, have been described so far. Almost all mutations in consensus splicing sites confer a neonatal phenotype. Most mutations in the OTC gene are ‘private’ and are distributed throughout the gene with a paucity of mutation in the sequence encoding the leader peptide (exon 1 and beginning of exon 2) and in exon 7. They have familial origin or occur de novo. Even with sequencing of the entire reading frame and exon/intron boundaries, only about 80% of the mutations are detected in patients with proven OTC deficiency. The remainder probably occur within the introns or in regulatory domains. The authors present a 4-year-old boy with the unreported missense mutation c.802A>G. The nucleotide transition leads to amino acid substitution Met to Val at codon 268 of the OTC protein.     

The spectrum of spontaneous mutations caused by deficiency in proteasome maturase Ump1 in Saccharomyces cerevisiae

Ump1 is responsible for maturation of the catalytic core of the 26S proteasome. Dysfunction of Ump1 causes an increase in the frequency of spontaneous mutations in Saccharomyces cerevisiae. In this study we analyze the spectrum of mutations occurring spontaneously in yeast deficient in Ump1 by use of the SUP4-o system. Single base substitutions predominate among the mutations analyzed (73 of the 91 alterations examined). Two major classes are GC to TA transversions and GC to AT transitions ( approximately 50 and approximately 30% of base substitutions, respectively). Besides base substitutions, almost all the major types of sequence alterations are represented. The specificity and distribution of mutations occurring in the ump1 strain are unique compared to the spectra previously established for other yeast mutators. However, the profile of mutations arising in this strain is similar to that observed in wild type. The same similarity has previously been reported for yeast deficient in Mms2, a protein involved in Rad6-dependent postreplication DNA repair (PRR). The specificity of the mutator effect caused by ump1 is discussed in light of the proposed role of the proteasome activity in the regulation of the PRR mechanisms.     

New Acceptor–Donor–Acceptor Systems Based on Bis-(Imino-1,8-Naphthalimide)

In this paper, six novel symmetrical bis-(imino-1,8-naphthalimides) differing in core and N-substituent structure were synthesized, and their thermal (TGA, DSC), optical (UV-Vis, PL), electrochemical (DPV, CV) properties were evaluated. The compounds were stable to 280 °C and could be transferred into amorphous materials. Electrochemical investigations showed their ability to occur reductions and oxidations processes. They exhibited deep LUMO levels of about −3.22 eV and HOMO levels above −5.80 eV. The optical investigations were carried out in the solutions (polar and non-polar) and in films and blends with PVK:PBD. Bis-(imino-1,8-naphthalimides) absorbed electromagnetic radiation in the range of 243–415 nm and emitted light from blue to yellow. Their capacity for light emission under voltage was preliminarily tested in devices with an active layer consisting of a neat compound and a blend with PVK:PBD. The diodes emitted green or red light.     

Mechanical and Combustion Properties of Agglomerates of Wood of Popular Eastern European Species

The objective of the reported project was to produce wood agglomerates from popular East European species to determine their strength and combustion properties. Closed-die pellets were produced from sawdust of six types of wood common on the East European market: pine, willow, oak, poplar, birch, and beech. The properties of pellets, determined by the type of wood, were influenced by the compaction pressure and the moisture content of the sawdust. The highest average pellet density was obtained for oak sawdust, while the lowest density was obtained for poplar pellets. Expansion of pellets after removing from the die was found to be dependent on the wood species, and as expected, on compaction pressure. The pellet expansion increased after 2 h of conditioning in the laboratory and with an increase in moisture content. The highest and the smallest strength were obtained for oak pellets and for birch sawdust, respectively. The strength of the pellets increased by more than 100% with an increase in the compaction pressure from 60 MPa to 120 MPa. The average strength decreased by 65% with increasing moisture content. For all tested materials, drop resistance remained at a high level, acceptable in industrial practice. The highest calorific value of 18.97 MJ/kg was obtained for pine pellets. The highest ash value of 1.52% was obtained for willow pellets and the lowest value of 0.32% for pine pellets.     

Influence of Long-Term Storage on the Caking Properties Determined in Punch Test and Fungal Contamination of Potato Starch and Wheat Flour

The presented results are an attempt to identify the changes taking place during a punch test experiment and the development of fungal impurities of powdered food materials over long-term storage at 75% RH. The potato starch and wheat flour market has a large share of the global production of bulk materials. The growing interest in powdered food materials requires additional production expenditure. This is associated with an increase in storage time of the discussed product and providing it with the appropriate conditions. The samples of potato starch and wheat flour were stored in perforated containers in a climatic chamber at 75% humidity and 21 °C for five months and then samples were measured by a punch test in a Lloyd LRX materials testing machine. The graphs obtained in the potato starch punch test differed significantly from wheat flour. The thickening of potato starch was observed in the form of layers, while potato starch was uniformly thickened throughout the experiment. The conditions of 75% humidity and 21 °C can be described as the beginning of the caking process. In potato starch, linear sections were observed, which changed the length of their storage time and, additionally, was correlated with the appearance of fungal contamination. These results may suggest the influence of fungi on the phenomenon of bulk material caking.     

Zirconia–Alumina Composites Obtained by Centrifugal Slip Casting as Attractive Sustainable Material for Application in Construction

This paper focuses on the possibility of adapting the centrifugal slip casting method to obtain zirconia–alumina composite materials in the form of finished tube-shaped products. These types of products, due to their unique properties, can be utilised, for example, in the transport of aggressive substances, even in extreme temperatures or corrosive conditions. The study reports on the two series of zirconia–alumina composites differing in the content of ZrO₂—2.5 and 25 vol%. The fabricated and sintered materials were characterised using scanning electron microscopy (SEM), X-ray diffraction (XRD) and stereological analysis. Moreover, a life cycle assessment (LCA) was provided in accordance with the requirements of the ISO 14044 and EN 15805 standards. The obtained data clearly show that the centrifugal slip casting method allows obtaining samples with high density and extremely uniform distribution of the ZrO₂ phase in the alumina matrix. The stereological analysis results proved also that the addition of ZrO₂ is effective in reducing the growth of Al₂O₃ grains during the sintering process. The phase analysis carried out by means of XRD showed that during the sintering process, in the case of composites with a lower ZrO₂ content (2.5 vol%), the monoclinic to tetragonal transformation of ZrO₂ was total, while for samples containing 25 vol% ZrO₂, the monoclinic phase remained in a small amount in the final product.