前列康宝的药理学研究

实验结果表明，前列康宝具有明显的抗前列腺增生，抗炎及改善微循环作用。     

瞬目反射正常值及初步临床应用

目的 了解健康成人瞬目反射正常值及其临床应用价值。方法 采用Ｅｖｏｌｕｔｉｏｎ型神经肌肉记录仪检测，表面电极直接刺激眶上神经，诱发瞬目反射。在同侧眼轮匝肌记录出短潜伏期波和双侧眼轮匝肌记录出长潜伏期波。对２０名（４０例）健康人和３０例患者（其中包括三叉神经疾病，面神经疾病及听神经瘤）进行瞬目反射测试。结果 ＢＲ潜伏期健康成人平均值Ｒ１为１０．０ｍｓ，Ｒ２和Ｒ２‘为３０．４ｍｓ和３０．７ｍｓ，患者组     

瞬目反射正常值及初步临床应用

目的了解健康成人瞬目反射正常值及其临床应用价值。方法采用Ｅｖｏｌｕｔｉｏｎ型神经肌肉记录仪检测，表面电极直接刺激眶上神经，诱发瞬目反射（ｂｌｉｎｋｒｅｆｌｅｘ，ＢＲ）。在同侧眼轮匝肌记录出短潜伏期波（Ｒ１）和双侧眼轮匝肌记录出长潜伏期波（Ｒ２，Ｒ２’）。对２０名（４０侧）健康人和３０例患者（其中包括三叉神经疾病，面神经疾病及听神经瘤）进行瞬目反射测试。结果ＢＲ潜伏期健康成人平均值Ｒ１为１０．１ｍｓ，Ｒ２和Ｒ２’为３０．４ｍｓ和３０．７ｍｓ。患者组患侧ＢＲ各波潜伏期延长，与健侧和健康人相比较，经ｔ检验，Ｐ＜０．０１，差异有极显著性。结论测试结果表明该技术简单、可靠，对三叉神经、面神经疾病和听神经瘤的早期诊断能提供有价值的电生理测试结果。     

T抗原单克隆抗体法在大肠癌筛检中的应用初探

目的 探讨T抗原单克隆抗体法在大肠癌筛检中的临床价值.方法 同时采用T抗原单克隆抗体法和半乳糖氧化酶法检测207例直肠粘液中的T抗原.结果 T抗原单克隆抗体法和半乳糖氧化酶法的敏感性和特异性分别为69.2%、67.3%和64.2%、65.6%,两者的筛检价值无明显差别.结论T抗原单克隆抗体法对大肠癌筛检有较大临床价值,且操作简便.     

全肠外营养对早产儿营养、免疫功能及行为发育的影响

【目的】探讨全肠外营养(TPN)对早产儿营养、免疫功能及行为发育的影响。【方法】监测55例TPN治疗早产儿的营养状况、肝肾功能、血脂水平、免疫功能及矫正胎龄40周时行为发育情况，并与25例未行TPN的早产儿对照分析。【结果】TPN治疗组体重增长快、体重日增长及治疗后体重高于对照组，TPN治疗后血清蛋白、免疫球蛋白及补体水平升高，肝肾功能及血脂检查无明显异常，矫正胎龄40周时NBNA评分高于对照组。【结论】TPN能改善早产儿营养状况、促进免疫水平的提高和行为神经的发育，对早产儿的治疗有重要意义。     

茵栀黄注射液治疗新生儿高未结合胆红素血症的150例

目的 :及早有效纠正新生儿高未结合胆红素血症 ,以预防胆红素脑损伤。方法 :在常规治疗的同时 ,加用茵栀黄注射液静脉滴注。结果 :治疗组胆红素日均下降值为 (50 17±25 26) μmol/L ,明显高于对照组的 (37 95±21 58) μmol/L。结论 :茵栀黄注射液治疗新生儿高未结合胆红素血症 ,可迅速降低血胆红素水平 ,明显缩短治疗时间。     

Characteristics and trends in incidence of inflammatory bowel disease in Taiwanese children.

BACKGROUND AND PURPOSE: Although chronic inflammatory bowel disease (IBD) is rare in Asian children, increasing numbers of pediatric patients with chronic IBD worldwide have been noted in recent years. This study was conducted to delineate the trend in incidence and clinical patterns of childhood IBD in Taiwan. METHODS: All children admitted to National Taiwan University Hospital (NTUH) between 1979 and 2000 who met the criteria for IBD, Crohn's disease (CD), ulcerative colitis (UC), probable CD (PCD), or indeterminate colitis were included. The clinical features and outcomes were analyzed retrospectively. Incidence was calculated using cases of chronic diarrhea during the same period of time as the risk population. RESULTS: IBD was diagnosed in 17 children (9 females and 8 males, aged 2 months to 18 years) during the study period. Six (35%) of these children had UC, 9 (53%) had CD, and 2 (12%) had PCD. The cumulative incidence of CD during 1979-1995 was 0.85%, and increased to 2.6% during 1996-2000 (p < 0.001), while the incidence of UC did not change significantly between these periods (from 0.85% to 0.99%, p = 0.16). The median interval from onset to diagnosis was 7.7 months. Eighty percent of patients had moderate to severe disease activity at diagnosis. The follow-up duration ranged from less than 1 year to 20 years, with a mean of 4.3 years. Two patients were lost to follow-up. Eighty six percent of patients responded to treatment, and 80% of patients had inactive to mild disease activity when re-evaluated at the end of 2000. CONCLUSION: There has been a marked recent increase in the incidence of childhood CD in Taiwan but the rate of childhood UC has remained unchanged. Eighty percent of cases of childhood IBD responded well to treatment.     

彩色多普勒超声检查在原发性肝癌经伽玛刀治疗32例的效果评价

目的:探讨彩色多普勒超声检查肝癌经伽玛刀(-γ刀)治疗效果的价值。方法:32例原发性肝癌患者37个肿块,-γ刀治疗前及治疗后1周、1个月、3个月、6个月运用彩色多普勒超声进行随访。结果:-γ刀治疗后1周～1个月,肝癌病灶表现为稳定,3～6个月,病灶表现为显效,且肿块越小,治疗效果越好。结论:-γ刀治疗肝癌,是一种体外无创性的放疗方法,近期疗效满意。彩超的检查结果与临床随访相符。彩超可望成为肝癌-γ刀治疗后的观测疗效及指导治疗的有效方法。     

Contribution Ratio Assessment of Process Parameters on Robotic Milling Performance

Robotic milling has broad application prospects in many processing fields. However, the milling performance of a robot in a certain posture, such as in face milling or grooving tasks, is extremely sensitive to process parameters due to the influence of the serial structure of the robot system. Improper process parameters are prone to produce machining defects such as low surface quality. These deficiencies substantially decrease the further application development of robotic milling. Therefore, this paper selected a certain posture and carried out the robotic flat-end milling experiments on a 7075-T651 high-strength aeronautical aluminum alloy under dry conditions. Milling load, surface quality and vibration were selected to assess the influence of process parameters like milling depth, spindle speed and feed rate on the milling performance. Most notably, the contribution ratio based on the analysis of variance (ANOVA) was introduced to statistically investigate the relation between parameters and milling performance. The obtained results show that milling depth is highly significant in milling load, which had a contribution ratio of 69.25%. Milling depth is also highly significant in vibration, which had a contribution ratio of 51.41% in the X direction, 41.42% in the Y direction and 75.97% in the Z direction. Moreover, the spindle speed is highly significant in surface roughness, which had a contribution ratio of 48.02%. This present study aims to quantitatively evaluate the influence of key process parameters on robotic milling performance, which helps to select reasonable milling parameters and improve the milling performance of the robot system. It is beneficial to give full play to the advantages of robots and present more possibilities of robot applications in machining and manufacturing.