The effect of free-electron laser pulse structure on mid-infrared soft-tissue ablation: biological effects

Previous studies have shown that changing the pulse structure of the free electron laser (FEL) from 1 to 200 ps and thus reducing the peak irradiance of the micropulse by 200 times had little or no effect on both the ablation threshold radiant exposure and the ablated crater depth for a defined radiant exposure. This study focuses on the ablation mechanism at 6.1 and 6.45 microm with an emphasis on the role of the FEL pulse structure. Three different experiments were performed to gain insight into this mechanism. The first was an analysis of the ablation plume dynamics observed for a 1 ps micropulse compared with a 200 ps micropulse as seen through bright-field analysis. Negligible differences are seen in the size, but not the dynamics of ablation, as a result of this imaging. The second experiment was a histological analysis of corneal and dermal tissue to determine whether there is less thermal damage associated with one micropulse duration versus another. No significant difference was seen in the extent of thermal damage on either canine cornea or mouse dermis for the micropulse durations studied at either wavelength. The final set of experiments involved the use of mass spectrometry to determine whether amide bond breakage could occur in the proteins present in tissue as a result of direct absorptions of mid-infrared light into the amide I and amide II absorption bands. This analysis showed that there was no amide bond breakage due to irradiation at 6.45 microm on protein.     

Ectopic bone formation in rats: the importance of the carrier

Much research has been done to develop the ideal bone graft substitute (BGS). One approach to develop this ideal BGS is the use of growth factors, but for this approach osteoprogenitor cells are needed at the site of reconstruction. An alternative is a cell-based approach, where enough cells are provided to form bone in a carrier material. In previous studies of our group, titanium (Ti) carriers have been used, because of the excellent mechanical properties and the bone-compatibility of this material. On the other hand, calcium phosphate (CaP) ceramics are known for their excellent osteoconductivity. The aim of this study is to investigate the influence of the carrier in a cell-based bone regeneration approach, whereby we hypothesize that CaP-ceramic implants will induce more bone formation than Ti-fiber implants, in the same animal model as our previous experiment. Ti-fiber mesh implants and ceramic implants were seeded with rat bone marrow cells (RBM) and implanted subcutaneously. Histological analysis after one, three and six weeks showed differences in the way of bone formation in the two groups: bone appeared to grow from the center to the periphery of the implant in the titanium group, while bone formation in the ceramic group occurred through the whole implant. Histomorphometrical analysis after one week showed very limited bone formation for both the titanium and ceramic group. At three weeks, the amount of bone formation was increased till about 10% for the titanium group and 18% for the ceramic group. No significant difference between the two groups could be observed. In the six week group, the bone formation was 6% (Ti) and 23% (CaP), respectively (P < 0.001). Further, bone formation started earlier in the CaP-ceramic scaffolds than in the Ti scaffolds. Our hypothesis could be confirmed: ceramic implants induce more bone formation than titanium implants.     

Enhanced viral clearance in interleukin-18 gene-deficient mice after pulmonary infection with influenza A virus

T helper 1 driven immune responses facilitate host defence during viral infections. Because interleukin-18 (IL-18) mediates T helper 1 driven immune responses, and since mature IL-18 is up-regulated in human macrophages after influenza virus infection in vitro, it has been suggested that IL-18 plays an important role in the immune response to influenza. To determine the role of IL-18 in respiratory tract infection with influenza, IL-18 gene-deficient (IL-18(-/-)) and normal wildtype mice were intranasally inoculated with influenza A virus. Influenza resulted in an increase in constitutively expressed IL-18 in the lungs of wildtype mice. The clearance of influenza A was inhibited by IL-18, as indicated by reduced viral loads on day 8 and day 12 after infection in IL-18(-/-) mice. This enhanced viral clearance correlated with increased CD4(+) T-cell activation in the lungs as reflected by CD69 expression on the cell surface. Surprisingly, interferon-gamma (IFN-gamma) levels were similar in the lungs of IL-18(-/-) mice and wildtype mice. Intracellular IFN-gamma staining revealed similar expression levels in lung-derived natural killer cells, CD4(+) and CD8(+) T cells, indicating that IFN-gamma production is IL-18-independent during influenza virus infection. Tumour necrosis factor-alpha production by CD4(+) T cells was significantly lower in IL-18(-/-) mice than in wildtype mice. Our data indicate that endogenous IL-18 impairs viral clearance during influenza A infection.     

Electrostatic spray deposition (ESD) of calcium phosphate coatings, an in vitro study with osteoblast-like cells

Electrostatic spray deposition (ESD) is a recently developed technique to deposit a calcium phosphate (CaP) coating upon substrates. With this technique, an organic solvent containing calcium and phosphate is pumped through a nozzle. Between the nozzle and substrate a high voltage is applied. As a consequence, droplets coming out the nozzle disperse into a spray, and this spray is deposited upon the substrate. When the solvent has evaporated, a coating is formed on the substrate. ESD allows for a variation in coating composition and morphology. Titanium alloy (TiAl6V4) substrates were coated with a CaP layer using two different methods; radio frequency magnetron sputtering, and ESD. These surfaces were characterized with X-ray diffraction, Fourier transform infrared spectroscopy, an universal surface tester, scanning electron microscopy, and energy dispersive spectrometry. Subsequently, bone marrow cells were isolated from rat femora and cultured 1, 4, 8, 14 and 16 days. Cell proliferation, alkaline phosphatase activity, and osteocalcin concentration were assayed. RT-PCR was done for collagen type I and osteocalcin. SEM was also performed to observe cellular behaviour during culture. Two separate runs of the experiment were performed. In the first run, osteoblast-like cells on both CaP coatings showed similar results in all assays. In the second run, proliferation and osteogenic expression had increased on ESD coatings. On basis of these results, we conclude that the novel ESD coating behaved similar to, or even better than the known RF magnetron sputter coating. Thus, ESD could be a valid addition to already existing CaP coating processes.     

Transforming growth factor-beta3-loaded microtextured membranes for skin regeneration in dermal wounds

Adverse effects of wound healing, such as excessive scar tissue formation, wound contraction, or nonhealing wounds represent a major clinical issue in today's healthcare. Transforming growth factor (TGF)-beta3 has specifically been implicated in wound healing. Our hypothesis was that local administration of TGF-beta3 to excisional dermal wounds would diminish wound contraction and scar formation. Microtextured wound covers, containing different concentrations of TGF-beta3, were placed onto full-thickness excisional skin wounds in guinea pigs. Tattooed reference marks were used to quantify wound contraction. Sixty-four male guinea pigs in four study groups (5 ng TGF-beta3, 50 ng TGF-beta3, no growth factor, sham wound) were followed for up to 6 weeks. We analyzed 19 different parameters of wound healing. Results showed that, in some instances, the 50-ng TGF-beta3 group gave less contraction, whereas the 5-ng TGF-beta3 group gave more contraction. These differences confirm that TGF-beta3 has an optimum working concentration, and suggest this concentration to be closer to 50 ng than to 5 ng TGF-beta3. However, only very few significant differences occurred, and thus we conclude that the clinical relevance of our findings is negligible. Earlier studies, reporting clinically improved wound healing by TGF-beta3, could therefore not be confirmed by this study.     

Adding salmeterol to an inhaled corticosteroid reduces allergen-induced serum IL-5 and peripheral blood eosinophils

BACKGROUND: Adding a long-acting beta(2)-agonist to inhaled corticosteroids results in better symptomatic asthma control than increasing the dose of inhaled corticosteroids. OBJECTIVE: Investigating whether adding the long-acting beta(2)-agonist salmeterol to the inhaled corticosteroid fluticasone propionate has an effect on allergen-induced allergic inflammation in asthma. METHODS: Bronchial allergen challenges were performed in 26 patients with allergic asthma, pretreating them with a single dose of either fluticasone/salmeterol (100/50 microg) or fluticasone alone (100 microg), in a double-blind, randomized, cross-over design. Sputum and serum markers of bronchial inflammation were measured after allergen challenge, as well as lung function parameters. Primary outcomes were sputum eosinophil numbers and eosinophil cationic protein. RESULTS: Asthmatic responses after allergen challenge were significantly reduced after pretreatment with fluticasone/salmeterol relative to fluticasone alone. Sputum inflammatory markers after allergen challenge were not significantly affected by fluticasone/salmeterol pretreatment. By contrast, serum IL-5 was significantly reduced (geometric mean serum IL-5 [SEM]: 0.5 [0.3] vs 1.1 [0.3] pg/mL 1 hour and 0.6 [0.3] vs 1.1 [0.3] pg/mL 6 hours after challenge with fluticasone/salmeterol vs fluticasone alone pretreatment, respectively; P values < .05). Also, peripheral blood eosinophils were significantly reduced (geometric mean number x 10(6)/L [SEM]: 172 [0.1] vs 237 [0.1] at 6 hours and 271 [0.1] vs 351 [0.1] at 24 hours with fluticasone/salmeterol vs fluticasone alone pretreatment, respectively; P < .05). CONCLUSION: Adding salmeterol to fluticasone reduces allergen-induced serum IL-5 and peripheral blood eosinophils. This phenomenon may contribute to the improved clinical outcomes that result from adding a long-acting beta(2)-agonist to inhaled corticosteroids.     

Bone formation in CaP-coated and noncoated titanium fiber mesh

The osteogenic activity of calcium phosphate (CaP)-coated and noncoated porous titanium (Ti) fiber mesh loaded with cultured syngeneic osteogenic cells after prolonged in situ culturing was compared in a syngeneic rat ectopic assay model. Rat bone marrow (RBM) cells were loaded onto the CaP-coated and noncoated Ti scaffolds using either a droplet or a suspension loading method. After loading, the RBM cells were cultured for 8 days in vitro. Thereafter, implants were subcutaneously placed in 39 syngeneic rats. The rats were euthanized and the implants retrieved at 2, 4, and 8 weeks postoperatively. Further, in the 8 week group fluorochrome bone markers were injected at 2, 4, and 6 weeks. Histological analysis demonstrated that only the CaP-coated meshes supported bone formation. The amount of newly formed bone varied between single and multiple spheres to filling a significant part of the mesh porosity. In the newly formed bone, osteocytes embedded in a mineralized matrix could be observed clearly. On the other hand, in the noncoated titanium implants, abundant deposition of calcium-containing material was seen. This deposit lacked a bonelike tissue organization. Further analysis revealed that the cell-loading method did not influence the final amount of bone formation. In CaP-coated implants the accumulation sequence of the fluorochrome markers showed that bone formation started on the mesh fibers. In conclusion, our results prove that the combination of a thin CaP coating, Ti-mesh, and RBM cells can indeed generate ectopic bone formation after prolonged in vitro culturing. No effect of the loading method was observed on the final amount of bone.