构建7q32区域鼻咽癌和正常鼻咽上皮细胞部分基因的表达图谱

目的构建７ｑ３２区域鼻咽癌细胞和组织及原代培养人正常鼻咽上皮细胞的部分基因表达图谱。方法通过差异ＲＴ－ＰＣＲ和Ｎｏｒｔｈｅｒｎ杂交的方法检测定位于７ｑ３２区域的２０个ＥＳＴ在鼻咽癌细胞和鼻咽癌组织及原代培养人正常鼻咽上皮细胞ｍＲＮＡ的表达水平。结果８个ＥＳＴ在鼻咽癌细胞ＨＮＥ１和原代培养人正常鼻咽上皮细胞中表达量较一致，７个ＥＳＴ在两种细胞中均无表达，３个ＥＳＴ（Ｗ７２６８８、Ｈ１９８３０、ＡＡ１３０６３０）在鼻咽癌细胞株中表达上调，而２个ＥＳＴ（ＡＡ０７０４３７、Ｈ９０８８２）在原代培养人鼻咽上皮细胞中表达上调。在１３例鼻咽癌活检组织中３０．７％（４／１３）的ＡＡ０７０４３７表达下调，７７％（１０／１３）的Ｗ７２６８８和７７％（１０／１３）的Ｈ１９８３０表达上升。结论构建了７ｑ３２区域鼻咽癌细胞和组织及原代培养人正常鼻咽上皮细胞部分基因表达图谱，并初步认为Ａ０７０４３７的表达下调和Ｗ７２６８８、Ｈ１９８３０的过表达与鼻咽癌的发生有关。     

Age-dependent DNA methylation changes in the ITGAL (CD11a) promoter

DNA methylation patterns change with age in a complex fashion, typically with an overall decrease in genomic deoxymethylcytosine (d(m)C) content, but with local increases in some promoters that contain GC-rich sequences known as CpG islands. While the consequences of age-dependent CpG island methylation have recently been studied in organs such as the colon, less is known about the functional significance of the progressive hypomethylation of promoters lacking CpG islands, and the significance of age-dependent changes in T cell DNA methylation is completely unexplored. We asked if age-dependent DNA hypomethylation might contribute to overexpression of the T cell ITGAL gene, which encodes CD11a, a subunit of LFA-1. CD11a mRNA increased with age as well as with experimentally induced DNA hypomethylation. This increase correlated with hypomethylation of sequences flanking the ITGAL promoter in vitro and in aging. 'Patch' methylation of the region suppressed promoter function. DNA methyltransferases 1 and 3a also decreased with aging. These results indicate that hypomethylation of regions flanking the ITGAL promoter may increase CD11a expression, and suggest that age-dependent hypomethylation of promoters lacking CpG islands, perhaps due to decreased DNA methyltransferase expression, may be one mechanism contributing to increased T cell gene expression with aging.     

Characterization of damage modes in dental ceramic bilayer structures

Results of contact tests using spherical indenters on flat ceramic coating layers bonded to compliant substrates are reported for selected dental ceramics. Critical loads to produce various damage modes, cone cracking, and quasiplasticity at the top surfaces and radial cracking at the lower (inner) surfaces are measured as a function of ceramic-layer thickness. It is proposed that these damage modes, especially radial cracking, are directly relevant to the failure of all-ceramic dental crowns. The critical load data are analyzed with the use of explicit fracture-mechanics relations, expressible in terms of routinely measurable material parameters (elastic modulus, strength, toughness, hardness) and essential geometrical variables (layer thickness, contact radius). The utility of such analyses in the design of ceramic/substrate bilayer systems for optimal resistance to lifetime-threatening damage is discussed.     

2,8-Dihydroxyadenine urolithiasis in a patient with considerable residual adenine phosphoribosyltransferase activity in cell extracts but with mutations in both copies of APRT

We have examined the mutational basis of adenine phosphoribosyltransferase (APRT, EC 2.4.2.7) deficiency (MIM 102600) in a patient of Polish origin who has been passing 2,8-dihydroxyadenine (DHA) stones since birth, but has considerable residual enzyme activity in lymphocyte extracts. The five exons and flanking regions of APRT were amplified by PCR and then sequenced. A single T insertion was identified at the intron 4 splice donor site (TGgtaa to TGgttaa:IVS4+2insT) in one allele from the proband, his mother, and brother. A G-to-T transversion in exon 5 (GTC-to-TTC:c.448G>T, V150F) was identified in the other allele, and this mutation was also present in one allele from the father and the paternal grandmother. Tru91 and AvaII digestions of PCR products spanning exons 4 and 5, respectively, confirmed the mutations. The mother was heterozygous for an intragenic TaqI site, but all other family members were homozygous for the presence of this site. IVS4+2insT, located on the allele containing the TaqI site, has been identified previously in several families from Europe, suggesting a founder effect, but the substitution in exon 5 is a novel mutation. IVS4+2insT is known to result in complete loss of enzyme activity, and our results suggest that V150F produces an enzyme that is nonfunctional in vivo but has considerable residual activity in vitro.     

Production and Characterization of Generic Antibodies Against s-Triazine and Sulfonylurea Herbicides

Two different hapten designs have been suggested for production of generic antibodies. The first approach was based on the immunogen prepared by conjugating simazine mimic to carrier proteins through the Cl position of the s-triazine herbicide. For sulfonylurea herbicides a single ring hapten strategy was designed in order to produce antibodies with dominant selectivity towards arylsulfonyl or triazine moieties of metsulfuron-methyl. The best monoclonal antibody raised against simazine-derived hapten mimic (clone B10/B8/D2) exhibited in direct ELISA a broad pattern for a group of methylthio and methoxy s-triazines. Cross-reactivities based on simazine ( = 100%) were 417, 125, 25, 50, 28, 42 and 11% for simetryn, ametryn, prometryn, terbutryn, aziprotryn, atraton and atrazine, respectively. The superiour generic pattern was found for monoclonal antibody raised against s-triazine moiety of metsulfuron-methyl herbicide (clone 2C8/C8). This antibody showed in indirect ELISA the cross-reactivity values 100, 142, 95, 60, 40, 167, 83 and 21% for metsulfuronmethyl, cinosulfuron, triasulfuron, primisulfuron-methyl, thifensulfuron-methyl, chlorsulfuron and prosulfuron and tribenuron-methyl, respectively. The assays using both monoclonal and polyclonal antibodies operated within the ppt-ppb calibration ranges.     

Parental origin and mechanism of formation of X chromosome structural abnormalities: Four cases determined with RFLPs

Parental origin and mechanism of formation of X chromosome structural anbormalities were studied in one each case of dup(X)(pter p11.4::p22.1qter), del(X)(qterp11:), i(X)(qtercenqter), and inv dup(X) (pterq22::q22pter) using various X-linked RFLPs as genetic markers. Segregation and densitometric analyses on polymorphic DNAs revealed that the dup(Xp) and the del(Xp) are both of paternal origin and the i(Xq) and i dic(X) are of maternal origin. The dup(Xp) had arisen by an unequal sister chromatid exchange and the del(Xp) had occurred through an intrachromosomal breakage-reunion mechanism, both in the paternal X chromosome. The i(Xq) had arisen either through centromere fission of a maternal X chromosome, followed by duplication, of its long-arm, or through a translocation between two maternal X chromosomes after meiotic crossing-over. The inv dup(X) arose through sister chromatid breakage and reunion in a maternal X chromosome. These results, together with those of previous studies, suggest that thede novo abnormalities due to events involving centromere disruption arise predominantly during oogenesis, while those due to simple breakage-reunion events occur preferentially during spermatogenesis.     

Preparation of graded porous titanium coatings on titanium implant materials by plasma spraying

Graded porous titanium coatings have been deposited on titanium substrates for dental implants by plasma spraying in an argon atmosphere. X-ray diffraction (XRD), scanning electron microscopy (SEM), surface roughness measurement, and tensile strength tests were performed on graded porous coatings. The results showed that Ti(3)O(5) was formed in the outermost surface of the porous coatings due to oxidation. The graded porous coatings consisted of three layers. The outer layer was full of macropores with a surface roughness of approximately 100 microm. The diameter of many macropores reached and even surpassed 150 microm, which could be beneficial for tissue to grow into the coating. The middle layer consisted of a mixture of micropores and macropores. The inner layer was a very dense and tight interface layer that included mechanical, physical, and metallurgical bonding. In tensile strength tests, testing bars peeled off the coatings, because the adhesive agent fractured, but the coatings remained intact.