早发型子痫前期应用低分子肝素期待治疗的临床效果分析

目的分析早发型子痫前期应用低分子肝素期待治疗的临床效果。方法回顾分析2017-01—2018-12间在郑州大学第一附属医院产科终止妊娠的95例早发型子痫前期患者的临床资料。按终止妊娠前是否应用低分子肝素分为2组。对照组(47例)给予降压、解痉等治疗;观察组(48例)在对照组基础上加用低分子肝素。结果2组分娩孕周、妊娠延长时间、妊娠并发症发生率、新生儿出生体质量、新生儿窒息及胎儿宫内窘迫发生率、新生儿Apgar评分等,差异均无统计学意义(P>0.05)。结论对早发型子痫前期患者在常规治疗基础上短期应用低分子肝素,不能延长妊娠时间,不改善母婴结局。     

经自然腔道取标本手术在结直肠外科手术中的应用进展

随着腔镜技术的进一步发展以及微创理念应用于结直肠外科疾病的诊治中,结直肠相关疾病的诊治发生了翻天覆地的变化。由传统的经腹手术到腹腔镜手术、经自然腔道手术,再到经自然腔道取标本手术(NOSES),结直肠疾病的外科诊治在微创领域取得了巨大成果。NOSES技术是目前结直肠外科在微创领域前沿的手术方式之一,它通过经直肠、阴道取标本来避免了腹壁的辅助取标本切口,从而将结直肠外科手术进一步微创化。NOSES技术集传统腹腔镜手术的优势与现代微创外科的理念于一体,它在确保手术效果的基础上集中体现了微创、加速康复外科、功能外科、"无疤"等理念的特点。本文主要就国内外各中心开展NOSES技术在结直肠外科诊治开展中的相关经验、心得和体会进行综述。     

Influence of Fine Grains on the Bending Fatigue Behavior of Two Implant Titanium Alloys

By means of the ultrasonic surface impact (amplitude of 30 μm, strike number of 48,000 times/mm²), nanograins have been achieved in the surfaces of both Ti6Al4V(TC4) and Ti3Zr2Sn3Mo25Nb(TLM) titanium alloys, mainly because of the dislocation motion. Many mechanical properties are improved, such as hardness, residual stress, and roughness. The rotating–bending fatigue limits of TC4 and TLM subjected to ultrasonic impact are improved by 13.1% and 23.7%, separately. Because of the bending fatigue behavior, which is sensitive to the surface condition, cracks usually initiate from the surface defects under high stress amplitude. By means of an ultrasonic impact tip with the size of 8 mm, most of the inner cracks present at the zone with a depth range of 100~250 μm in the high life region. The inner crack core to TC4 usually appears as a deformed long and narrow α-phase, while the cracks in TLM specimens prefer to initiate at the triple grain boundary junctions. This zone crosses the grain refined layer and the deformed coarse grain layer. With the gradient change of elastic parameters, the model shows an increase of normal stress at this zone. Combined with the loss of plasticity and toughness, it is easy to understand these fatigue behaviors.     

Clinicopathologic significance of LAIR-1 expression in hepatocellular carcinoma

Aim

Leukocyte-associated immunoglobulin-like receptor-1 (LAIR-1) is an immune inhibitory receptor which is expressed within most types of hematopoietic cells and negatively regulates immune responses. Recently, we found LAIR-1 expression to be present within tumors of nonhematopoietic lineages. However, the roles of LAIR-1 in hepatocellular carcinoma (HCC) have yet to be examined. The purpose of this study was to investigate the expression of LAIR-1 in HCC tissue and assess its clinical significance at this site.

3D打印制备不同重量比例的n-HA/PLA/PVA复合膜性能比较

目的:通过3D打印的方法制备的不同重量比例的纳米羟基磷灰石/聚乳酸/聚乙烯醇(n-HA/PLA/PVA)复合膜,并对其相关性能检测。方法:采用3D打印技术制备不同重量比例的n-HA/PLA/PVA复合膜,分别为PLA/PVA复合膜、15%n-HA/PLA/PVA复合膜、50%n-HA/PLA/PVA复合膜、75%n-HA/PLA/PVA复合膜。扫描电镜下观察各组膜形态,对其力学性能、细胞毒性及动物实验相应指标进行检测。结果:扫描电镜下观察,n-HA/PLA/PVA复合膜呈现三维网状结构,各材料间相互结合,孔隙分布不均,大小不一。随着n-HA质量浓度的提高,电镜下见各材料间孔隙逐渐减小,形成结构均匀的复合膜。力学性能及吸水率检测中,随着nHA含量的增加,n-HA/PLA/PVA复合膜的拉伸强度及吸水率呈下降趋势;细胞毒性检测,不同比例复合膜的细胞增殖率无明显差别,无细胞毒性。动物实验测量牙周菌斑指数及龈沟出血指数未发现不同比例n-HA/PLA/PVA复合膜有统计学差异。结论:3D打印不同比例的n-HA/PLA/PVA复合膜具有良好的物理性能和细胞生物相容性,n-HA比例更高的复合膜可能具有更好的物理性能及良好的生物相容性。     

外周血miR-150-5p、SOCS1 mRNA对类风湿关节炎“病”“证”诊断意义的初步探讨＊

目的 探讨类风湿关节炎患者外周血miR-150-5p、细胞因子信号抑制因子1（suppressor of cytokine signaling 1，SOCS1）mRNA的表达及对类风湿关节炎（Rheumatoid Arthritis，RA）疾病诊断、中医证型判断的意义。方法 纳入符合诊断标准的RA患者57例及健康对照组19例，根据《22个专业95个病种中医诊疗方案》有关RA的中医证候诊断标准，判断RA的中医证型。qPCR检测RA患者及健康对照组miR-150-5p、SOCS1mRNA的相对表达水平，同时检测血常规、肝功能、肾功能等常规指标。双荧光素酶分析方法判断两者是否存在靶向关系。统计分析miR-150-5p、SOCS1 mRNA对RA疾病的诊断意义及其与中医证型的相关性。结果 RA患者外周血miR-150-5p的相对表达水平下调，低于正常人群（t = -19.019，P < 0.05）；其表达水平随疾病活动度升高，有下降趋势；患者外周血SOCS1 mRNA的相对表达水平上调，低于正常人群（t = 5.333，P < 0.05）；其表达水平随疾病活动度升高，有上升趋势。MiR-150-5p与SOCS1 mRNA有靶向结合关系（P < 0.05）。通过AUC曲线比较，miR-150-5p的相对表达水平区分RA的敏感性及特异性分别为98.1%、92.1%（AUC = 0.972，P < 0.05）；SOCS1 mRNA的相对表达水平无法区分RA（AUC = 0.472，P > 0.05）。RA患者中miR-150-5p的相对表达水平低于3.06，RA患者风湿痹阻证、寒湿痹阻证的相对风险分别为8.33、250.00（P < 0.05）。结论 miR-150-5p、SOCS1 mRNA在RA患者中有差异性表达，且有靶向结合关系。miR-150-5p可能是RA的疾病诊断及中医风湿痹阻证、寒湿痹阻证证型诊断的潜在生物标志物。