The need to use an arbitrary face-bow when remounting complete dentures with interocclusal records.

The need for the arbitrary face-bow during finished denture remount is demonstrated and advocated. The face-bow transfer allows a more accurate arc of closure on the articulator when the interocclusal records are removed and the articulator is closed.     

Microleakage and enamel finish.

Cavity preparations that are finished with hand instruments allow significantly less marginal leakage than those which are completed only with rotary instruments. This does not mean that hand-instruments walls are perfectly smooth; it only means that these walls allow less marginal leakage. Cavity preparations restored with composite resin showed more marginal leakage than those restored with amalgam. Also, the degree of marginal leakage was greater in cavity preparations restored with composite resin than in those restored with amalgam. Cavity preparations are more prone to marginal leakage at sharply defined cavosurface acute angles than at the smooth or straight surfaces of the cavity. This pattern of marginal leakage was true for both amalgam restorations and composite restorations, but the degree of marginal leakage was greater when composite resin was used as a restorative material. Since less marginal leakage was found in the finished cavity preparations, it is obvious that all cavity preparations must be finished with hand instruments. This may not completely eliminate the problem of marginal leakage, but it will reduce the potential secondary caries both in degree and frequency. Also, since sharply defined acute angles did exhibit more marginal leakage, this part of the cavity preparation needs special attention. With amalgam and composite restorations at least, these angles should not be sharply defined but should be slightly round, so that better condensation of restorative materials can be obtained. This may reduce the degree of marginal leakage.     

Numerical identification of teeth in Japanese shrew-moles, Urotrichus talpoides and Dymecodon pilirostris.

Numerical determination of the teeth of two species of Japanese shrew moles, Urotrichus talpoides and Dymecodon pilirostris (Talpidae, Insectivora), was based on the position of the premaxillo-maxillary suture, comparison of the dentitions of the two species with those of their relatives and the supernumerary tooth. The premaxillo-maxillary suture is situated between the fifth and sixth tooth anterior to the M1, and the fifth tooth anterior to the M1 was determined to be C both in the two species. The supernumerary tooth which appears in the gap between the third and fourth anterior to the M1 of the lower jaw of Urotrichus talpoides was considered as a relic of pdl which seems to have been lost relatively recently in the evolution of this species. It was also shown that the first premolar of the upper jaw of the Urotrichus talpoides and the first premolars of the Dymecodon pilirostris are dihyodont. Retention of the dihyodont first premolars in these species seems to be a primitive character and is significant in determining the phylogenetical positions of these species.     

Dynamic shear properties of the temporomandibular joint disc

Shear stress might be an important factor associated with fatigue failure and damage of the temporomandibular joint disc. Little information, however, is available on the dynamic behavior of the disc in shear. Since the disc is an anisotropic and viscoelastic structure, in the present study the dependency of the dynamic shear behavior on the direction and frequency of loading was examined. Ten porcine discs were used for dynamic shear tests. Shear stress was applied in both anteroposterior (A-P test) and mediolateral (M-L test) directions. The dynamic moduli increased as the loading frequency increased. The dynamic elasticity was significantly larger in the A-P test than in the M-L test, although the dynamic viscosity was similar in both tests. The present results suggest that non-linearities, compression/shear coupling, and intrinsic viscoelasticity affect the shear material behavior of the disc, which might have important implications for the transmission of load in the temporomandibular joint.     

Implant-osseous osteotomy for correction of the misaligned anterior maxillary implant

The trend has been to use angled abutments to compensate for implants that have poor emergence profiles. This trend has resulted in increasing unfavorable forces being placed on the implant, poor soft tissue emergence and contours, or creation of areas that the patient cannot maintain properly. The end results are an esthetic compromise and ultimately implant failure. This case illustrates that a misplaced or misaligned integrated implant can be repositioned successfully within the maxillary alveolus. Careful treatment planning, flap design, and soft tissue manipulation must be considered to maintain the vascularity and integration within the implant-osseous segment as well as the soft tissue. The byproduct of maintaining vascular integrity is normal soft tissue morphology, especially of the interdental papillae (see Fig. 6).     

Breadth of the mandibular condyle affected by disturbances of the sex hormones in ovariectomized and orchiectomized mice

It is well known that the size of the condyle is different between males and females in humans. It has also been documented that ovariectomy (OVX) and orchiectomy (ORX) influence the remodeling of the condylar head in experimental animals. However, influences of sex hormones on the condyle in terms of its breadth have not been examined. With these considerations, this study was designed to examine the breadth of the mandibular condyle in OVX and ORX mice by histomorphometry 8 weeks after surgery. In the OVX mice, the condylar breadth was significantly larger than in the controls, while no significant differences in the breadth were found between the ORX mice and the controls. The thickness of the condylar cartilage layers exhibited similar findings to the breadth of the condyle. On the contrary, the trabecular bone volume was significantly smaller in the OVX and ORX mice than in the corresponding controls, and the difference was more substantial in female mice than in the males. These findings emphasize that a reduction of sex hormone levels, induced by OVX and ORX, significantly influences condylar morphogenesis.     

Clinical application of a new compact CT system to assess 3-D images for the preoperative treatment planning of implants in the posterior mandible A case report

When treatment planning before placing dental implants in the posterior region of the mandible, the locations of the inferior alveolar nerve and mental foramen need to be ascertained, as they determine the bone height available and the implant length selected. The purpose of this study was to introduce the clinical application of a newly developed compact computed tomography system (Ortho-CT) to assess three-dimensional (3-D) images for the preoperative treatment planning of implants in the posterior region of the mandible. To evaluate the 3-D images, we scanned using the Ortho-CT system the mandible with a radiopaque template placed in the posterior region. The Ortho-CT images provided excellent information for evaluating the morphology of the mandible, and for showing the location of the inferior alveolar nerve, mental foramen and the relationship of the template to the bone. We consider that Ortho-CT is a useful aid to preoperative treatment planning of implant therapy in the mandible.     

Changes in mechanical properties of poly-l-lactic acid mini-plate under functional load simulating sagittal splitting ramus osteotomy

The purpose of this study was to investigate how the characteristics of a poly-l-lactic acid mini-plate changed with dynamic loading in an environment with hydrolytic degradation. A mandible osteosynthesis model was prepared with specimen poly-l-lactic acid mini-plates to simulate sagittal splitting ramus osteotomy. The model was then subjected to dynamic loading, and changes in specimen shape and surface quality were observed. Specimen bending strength was then measured, and degree of hydrolytic degradation estimated. Neither dynamic loading nor degree of load clearly affected degree of hydrolytic degradation. The specimens maintained their original shape and bending strength for up to 4 weeks with dynamic loading of 40 N or less in an environment with hydrolytic degradation. At 8 weeks, under the same conditions, the specimens showed cracks or fractures, or both, together with a clear decrease in bending strength. The results suggest that dynamic loading causes cracking in a poly-l-lactic acid mini-plate, and that growth of these cracks decreases bending strength over time, leading to fatigue fracture.