Utility of Tissue Similarity Maps Based on Relative Cerebral Blood Volume for Grading Gliomas as Validated by Histological Results

@@     

多囊卵巢综合征妊娠患者与非多囊卵巢综合征孕妇妊娠结局比较

目的比较多囊卵巢综合征(PCOS)妊娠患者与非PCOS孕妇的妊娠结局。方法选取200例PCOS妊娠患者作为研究组,并选取同期200例非PCOS孕妇作为对照组,比较两组孕妇的妊娠结局、新生儿情况及妊娠期并发症情况。结果研究组的先兆流产、早产、足月剖宫产发生率显著高于对照组(P <0.05);两组的先兆早产发生率比较无统计学差异(P>0.05)。两组的新生儿情况比较无统计学差异(P>0.05)。研究组的妊娠期高血压综合征、妊娠期糖尿病、羊水异常、胎儿窘迫发生率显著高于对照组(P <0.05)。结论与非PCOS孕妇相比,PCOS妊娠患者的早产风险增加,且妊娠期高血压综合征、妊娠期糖尿病、羊水异常、胎儿窘迫发生率显著升高。     

N-三甲基壳聚糖对促进阿昔洛韦滴眼液眼部滞留性的体内外考察

目的对不同季铵化程度(DQ)的N-三甲基壳聚糖(TMC)促进阿昔洛韦(ACV)滴眼液眼部滞留性进行考察。方法将浓度为0.5%,DQ分别为20%、40%及60%的TMC(TMC20,TMC40,TMC60)加入ACV滴眼液中;以同浓度壳聚糖(CS)ACV滴眼液为阳性对照,以普通ACV滴眼液为阴性对照,选用家兔为实验动物,采用悬挂泡技术和束缚泡技术进行离体眼球表面接触角及解吸附动力学进行研究,同时在各种ACV滴眼液中分别加入0.05%的荧光素钠为示踪剂,在体研究各种ACV滴眼液在家兔眼部的滞留性。结果与普通ACV滴眼液相比,含CS及TMC的滴眼液在角膜表面的接触角明显降低,解吸时间及在体滞留时间明显延长(P<0.05);与同浓度的CS ACV阳性对照相比,TMC20促进滞留作用较弱,而TMC40作用差异无显著性(P>0.05),而TMC60的作用明显较强(P<0.05)结论 TMC可显著增加ACV的眼部滞留性,且与其DQ呈正相关。     

Evaluation of Degenerative Lumbar Scoliosis After Short Segment Decompression and Fusion

The objective of this study was to investigate short segment decompression of degenerative lumbar scoliosis (DLS) and the efficiency of fusion treatment.After DLS surgery, the patients were retrospectively reviewed using the VAS (visual analog scale) and ODI (Oswestry Disability Index) to assess clinical outcomes. All patients underwent posterior lumbar decompressive laminectomy, pedicle screw internal fixation, and posterolateral bone graft fusion surgery. Radiographic measurements included the scoliotic Cobb angle, the fused Cobb angle, the anterior intervertebral angle (AIA), the sagittal intervertebral angle (SIA), and lumbar lordosis angle. The relationships between these parameters were examined by bivariate Pearson analysis and linear regression analysis.Preoperatively, the Cobb angle at the scoliotic segment was 15.4°, which decreased to 10.2° immediately following surgery (P < 0.05). The AIA significantly increased by the last follow-up (4.4 ± 3.4) compared with pre- and postoperative values (2.5 ± 2.8 and 2.2 ± 2.4, respectively; P < 0.05). However, the scoliotic Cobb angle and the AIA did not correlate with the VAS or ODI scores. At the final follow-up, no patients had pseudoarthrosis or internal instrumentation-related complications.Short fusion surgical treatment results in limited DLS correction, with correction loss over time. The AIA between the upper adjacent segment and proximal fused vertebra continues to increase postoperatively, which does not exacerbate clinical symptoms, as reflected by the low reoperation rates for repairing degeneration at adjacent levels.     

益心舒胶囊联合常规疗法治疗非瓣膜性心房颤动临床研究

目的：观察益心舒胶囊联合常规疗法治疗非瓣膜性心房颤动的疗效。方法：纳入96 例气阴亏虚兼瘀血内阻型非瓣膜性心房颤动患者，采用随机数字表法分为对照组和观察组各48 例。2 组患者均予常规降压、降糖、调脂以及调整心态、饮食等治疗措施，并服用华法林钠片治疗，观察组加予益心舒胶囊治疗。2 组疗程均为3 个月。观察2 组治疗前及治疗3 个月后凝血功能指标、心房颤动发作情况、血浆N 末端B 型利钠肽原（NT-proBNP） 以及血液流变学水平的变化。结果：治疗后，2 组凝血酶原时间（PT）、活化部分凝血活酶时间（APTT）、凝血酶时间（TT）、国际标准化比值（INR） 均较治疗前增加（P＜0.01），观察组PT、APTT、TT、INR 均长于或高于对照组（P＜0.01）。2 组心房颤动发作时间与发作频率均较治疗前缩短或降低（P＜0.01），观察组心房颤动发作时间与发作频率均短于或低于对照组（P＜0.01）。2 组血浆NT-proBNP 水平均较治疗前降低（P＜0.01），观察组血浆NT-proBNP 水平均低于对照组（P＜0.01）。2 组红细胞比容（HCT）、纤维蛋白原（Fb）、全血黏度、血浆比黏度均较治疗前降低（P＜0.01），观察组4 项指标值均低于对照组（P＜0.01）。结论：在常规治疗基础上加服益心舒胶囊治疗气阴亏虚兼瘀血内阻型非瓣膜性心房颤动，在改善患者的凝血功能、心功能以及缓解临床症状方面疗效明显，且可有效改善血液流变学水平。     

足趾移植长手指全形再造术的临床应用

目的探讨足趾移植长手指全形再造手术的临床疗效。方法自2015年6月至2019年6月,对16例因外伤致手指缺损患者采用足趾移植长手指全形再造术,术后评估供区及受区的感觉功能、运动功能及外观形态,分析指甲畸形及增生性瘢痕的发生情况,并记录术后发生感染、血肿、皮片坏死及供区愈合不良等情况;通过调查问卷的方式分析患者的满意度。结果所有患者术后获随访1~12个月,其中2例受区发生感染,1例受区皮片边缘发生坏死,经换药后予以缓解;其余患者的供、受区均未出现长时间的痛疼感觉,受区感觉功能恢复达87.50%,受区运动功能恢复均较满意,手指外形基本满意。供区感觉受影响者2例,运动功能受限者1例,外形一般者2例。所有患者无指甲畸形及增生性瘢痕发生;满意者1例,基本满意者14例,不满意者1例。结论采用足趾移植长手指全形再造手术,基本可以满足患者及医师对于缺损手指进行完美修复的目标。     

Mixed Reality Combined with Three‐Dimensional Printing Technology in Total Hip Arthroplasty: An Updated Review with a Preliminary Case Presentation

Three‐dimensional (3D) printing technology, virtual reality, and augmented reality technology have been used to help surgeons to complete complex total hip arthroplasty, while their respective shortcomings limit their further application. With the development of technology, mixed reality (MR) technology has been applied to improve the success rate of complicated hip arthroplasty because of its unique advantages. We presented a case of a 59‐year‐old man with an intertrochanteric fracture in the left femur, who had received a prior left hip fusion. After admission to our hospital, a left total hip arthroplasty was performed on the patient using a combination of MR technology and 3D printing technology. Before surgery, 3D reconstruction of a certain bony landmark exposed in the surgical area was first performed. Then a veneer part was designed according to the bony landmark and connected to a reference registration landmark outside the body through a connecting rod. After that, the series of parts were made into a holistic reference registration instrument using 3D printing technology, and the patient's data for bone and surrounding tissue, along with digital 3D information of the reference registration instrument, were imported into the head‐mounted display (HMD). During the operation, the disinfected reference registration instrument was installed on the selected bony landmark, and then the automatic real‐time registration was realized by HMD through recognizing the registration landmark on the reference registration instrument, whereby the patient's virtual bone and other anatomical structures were quickly and accurately superimposed on the real body of the patient. To the best of our knowledge, this is the first report to use MR combined with 3D printing technology in total hip arthroplasty.