Characterization of von Willebrand factor in primary pulmonary hypertension

Summary The aim of this study was to determine the value of von Willebrand factor (vWF), a well-characterized endothelial cell protein secretion, as a marker for prognosis in patients with primary pulmonary hypertension (PPH). Venous and arterial blood samples were obtained from 18 clinically diagnosed PPH patients and 12 case controls matched for age and sex. Plasma vWF antigen was determined by enzymelinked immunosorbent assay (ELISA). The patients' multimeric vWF pattern was analyzed by sodium dodecylsulfate (SDS)-agarose-acrylamide electrophoresis, Western blot, and densitometric analysis. vWF sialic acid content was determined by a lectin-based ELISA. The PPH patients showed a higher content of vWF antigen in venous (P = 0.0026) and arterial (P = 0.0094) blood samples than controls. The mean vWF sialic acid content of the PPH patients corresponded to 37.7% of the mean value for the control group. On the basis of the hemodynamic response to vasodilator trial, the PPH patients were grouped as responders or nonresponders. The latter group showed a significantly higher plasma vWF antigen antecubital vein/radial artery ratio, an increased number of unusually large vWF multimers, and a diminished content of vWF sialic acid in comparison with the first group. We believe that our results establish the nature of vWF alterations that are related to endothelial cell damage in patients with primary pulmonary hypertension and that this could be of value when establishing the prognosis in this group of patients.     

Regulatory Agilities in the Time of COVID-19: Overview,Trends, and Opportunities

PurposeCrucial steps have been adopted by health and regulatory authorities around the world to respond to the COVID-19 pandemic. This review aims to highlight these steps by providing an overview of the regulatory approaches adopted during the onset of the pandemic, provide an assessment of observed trends, and offer some reflections and proposals to leverage learnings and opportunities from this current pandemic.MethodsDocuments and informational materials on regulating the development and management of medical products during the COVID-19 pandemic were collected and classified. These materials were sourced from official websites and press releases from health authorities and international bodies from selected markets across the globe, and covered the period between January and July 2020. Additional information to support this study was gathered through a literature review and analysis of related data available from the public domain, and was complemented with the authors' personal experience.FindingsCommunication has been vital in addressing the impact of COVID-19. A total of 1705 documents and informational materials related to health or regulatory response to the COVID-19 pandemic were gathered. Of these, 343 (around 20%) were identified as regulatory agilities. These agile approaches were classified into 3 categories, namely, where health and regulatory authorities had: (1) facilitated product management across the entire lifecycle, notably in expediting medical product use for COVID-19, ensuring the continuity of clinical trials, and addressing supply chain issues; (2) strengthened international cooperation; and (3) addressed regulatory burden with the adoption of electronic and digital tools.ImplicationsWhile many regulatory measures have been introduced temporarily as a response to the COVID-19 crisis, there are opportunities for leveraging an understanding from these approaches in order to collectively achieve more efficient regulatory systems and to mitigate and address the impact of COVID-19 and further future-proof the regulatory environment.     

Ventricular remodeling in growing rats with experimental diabetes: The impact of swimming training

Diabetic cardiomyopathy is associated with cardiac muscle remodeling, resulting in myocardial dysfunction, whereas exercise training (ET) is a useful nonpharmacological strategy for the therapy of cardiac diseases. This study tested the effects of low-intensity swimming-training on the structural remodeling of the left ventricle (LV) in growing rats with unmanaged experimental diabetes. Thirty-day-old male Wistar rats were divided into four groups (n = 5/group): sedentary-control (SC), exercised-control (EC), sedentary-diabetic (SD), and exercised-diabetic (ED). Swimming-training rats exercised 5 days/week, 90 min/day, with a load of 5% BW during 8 weeks. Sections of LV were stained with Periodic acid-Schiff, Sirius Red, and Gomori's reticulin. Seven days and 8 weeks after streptozotocin (STZ) induction (60 mg kg⁻¹ BW), blood glucose (BG) in the diabetic groups (SD = 581.40 ± 40.48; ED = 558.00 ± 48.89) was greater (p < 0.05) than in their controls (SC = 88.80 ± 21.70; EC = 85.60 ± 11.55). Swimming-training reduced BG by 23 mg/dL in the diabetics (p > 0.05). The LV of diabetic rats had increased interstitial collagen and reticular fibers on the extracellular matrix and presented glycogen accumulation. More importantly, all these adverse tissue changes induced by STZ were attenuated by ET. Together, these findings support the idea of a beneficial role of exercise in the LV remodeling in rats with unmanaged type-1 diabetes mellitus.     

3D skull modelling and description of a new baurusuchid (Crocodyliformes,Mesoeucrocodylia) from the Late Cretaceous (Bauru Basin) of Brazil

Baurusuchidae is one of the most diverse groups of South American notosuchians, unambiguously recorded in Late Cretaceous deposits of Brazil and Argentina. The group is characterized by a reduced tooth formula, a lateromedially compressed rostrum, and a verticalized quadrate, representing one of the top predators of their faunas. Historically, skull morphology is the most employed tool to investigate the relationships of baurusuchids, as most of the species have been primarily based on cranial remains. The present study describes a new baurusuchid species from the Bauru Basin of Brazil, based on the first tridimensional digital reconstruction of individualized skull bones for Notosuchia, and discusses its phylogenetic position within the group. The new species differs from all the other known baurusuchids by a depression on the posterior portion of the nasal bearing a crest, an infraorbital crest of the jugal that extends until the anterior margin of the lacrimal, the dorsal surface of the frontal lacking a longitudinal crest or depression, and the lateral convexity of the squamosal prongs participating in the occipital wall. The new taxon is consistently positioned as sister to the remaining baurusuchines, with Aplestosuchus sordidus and Stratiotosuchus maxhechti, as successive sister-taxa to a monophyletic Baurusuchus (Ba. albertoi, Ba. Salgadoensis, and Ba. pachecoi). Our updated phylogenetic analysis helps to differentiate the two major Baurusuchidae lineages, Baurusuchinae and Pissarrachampsinae. Yet, the new species shares morphological features with both groups, suggesting the occurrence of “Zones of Variability” in the radiation of Baurusuchidae.     

Pro-caspase-3 is constitutively expressed in luteinized granulosa cells from women undergoing controlled ovarian stimulation for in vitro fertilization

Apoptosis regulation in luteinized granulosa cells (LGC) during assisted reproduction procedures is still controversial. Caspase-3 is a major apoptosis mediator encoded by CASP3 and formed through cleavage of its precursor pro-caspase-3. The aim of this study was to investigate the expression patterns of pro-caspase-3 (mRNA and protein) and cleaved caspase-3 in human LGC. Thirty-five women undergoing controlled ovarian stimulation for in vitro fertilization were prospectively enrolled in the study. LGC were isolated from follicular fluid during oocyte pickup and evaluated by immunocytochemistry for pro-caspase-3 and cleaved caspase-3, and by real-time PCR for CASP3 mRNA expression. We found a positive staining of pro-caspase-3 in 77 % of the LGC (95 % confidence interval [CI] 60%–84%), whereas cleaved caspase-3 was found in only 4% of the cells (95 % CI 3%–6%). The abundance of cells expressing pro-caspase-3 was independent from CASP3 mRNA levels (r = 0.24, p = 0.255) and did not correlate with the amount of cleaved caspase-3 (r = -0.24, p = 0.186). Multivariable logistic regression showed that pro-caspase-3 positivity was not influenced by clinical characteristics such as age, cause or length of infertility, antral follicle count or hormonal drugs used to induce ovulation. These findings suggest that pro-caspase-3 is constitutively expressed in LGC, allowing quick cleavage into active caspase-3 and apoptosis triggering whenever needed in the course of gonadotropin-induced follicular development.     

Hallazgos iniciales en la radiografía de tórax como predictores de empeoramiento en la infección pulmonar por SARS-CoV-2. Correlación en 265 pacientes

Background and aimsWe aimed to analyze the relationship between the initial chest X-ray findings in patients with severe acute respiratory syndrome due to infection with SARS-CoV-2 and eventual clinical worsening and to compare three systems of quantifying these findings.Material and methodsThis retrospective study reviewed the clinical and radiological evolution of 265 adult patients with COVID-19 attended at our center between March 2020 and April 2020. We recorded data related to patients’ comorbidities, hospital stay, and clinical worsening (admission to the ICU, intubation, and death). We used three scoring systems taking into consideration 6 or 8 lung fields (designated 6 A, 6 B, and 8) to quantify lung involvement in each patient's initial abnormal chest X-ray and to classify its severity as mild, moderate, or severe, and we compared these three systems. We also recorded the presence of alveolar opacities and linear opacities (fundamentally linear atelectasis) in the first chest X-ray with pathologic findings.ResultsIn the χ2 analysis, moderate or severe involvement in the three classification systems correlated with hospital admission (p = 0.009 in 6 A, p = 0.001 in 6 B, and p = 0.001 in 8) and with death (p = 0.02 in 6 A, p = 0.01 in 6 B, and p = 0.006 in 8). In the regression analysis, the most significant associations were 6 B with alveolar involvement (OR 2.3; 95%CI 1.1.–4.7; p = 0.025;) and 8 with alveolar involvement (OR 2.07; 95% CI 1.01.–4.25; p = 0.046). No differences were observed in the ability of the three systems to predict clinical worsening by classifications of involvement in chest X-rays as moderate or severe.ConclusionModerate/severe extension in the three chest X-ray scoring systems evaluating the extent of involvement over 6 or 8 lung fields and the finding of alveolar opacities in the first abnormal X-ray correlated with mortality and the rate of hospitalization in the patients studied. No significant difference was found in the predictive ability of the three classification systems proposed.     

Comparison of the primary stability of orthodontic miniscrews after repeated insertion cycles:: An in vitro study

ObjectivesTo compare the primary stability of miniscrews after repeated cycles of insertion through insertion torque (IT) measurements and resonance frequency analysis (RFA).Materials and MethodsSixty titanium miniscrews were divided into two groups according to the insertion protocol: one with predrilled sites and the other self-drilled into porcine iliac crest bone specimens. Each group had three cycles of reinsertion. After each insertion, the IT and RFA were measured. The IT was measured by using a torque meter, and the RFA was measured using the Osstell ISQ device. A total of five miniscrews of each group were selected for sequential assessment of the morphology of their tip and threads using scanning electron microscopy after each insertion cycle.ResultsNo statistically significant differences were found in the IT values of miniscrews reinserted up to three times in the group with predrilled surgical sites. The IT value increased significantly with the number of reinsertions in the self-drilled group. The RFA value decreased as the number of insertions increased in both groups.ConclusionsUnder the conditions of this in vitro study, reinserting miniscrews deteriorates the integrity of their tip and thread. Reinsertion should be discouraged particularly when insertion sites are not predrilled.     

Effect of luting materials,presence of tooth preparation,and functional loading on stress distribution on ceramic laminate veneers: A finite element analysis

Statement of problemHow the polymerization shrinkage, loading, and mechanical properties of luting materials affect the shrinkage and functional stresses in ceramic laminate veneers (CLVs) with and without tooth preparation is unclear.PurposeThe purpose of this finite element analysis (FEA) study was to evaluate the effect of the polymerization shrinkage, functional loading, and mechanical properties of different luting materials on the stresses in ultrathin 0.3-mm CLVs with and without tooth preparation.Material and methodsThree resin cements, RelyX Veneer (RV), Allcem Veneer APS (AV), Variolink Esthetic LC (VE), and 1 flowable composite resin, Tetric N-Flow (TF), were tested for post-gel shrinkage (Shr), Knoop hardness (KHN), elastic modulus (E), compressive strength (CS), and diametral tensile strength (DTS). IPS e.max CAD disks of 0.3-mm thickness were made for simulating the effects of light attenuation. Eight 2-dimensional finite element models (Marc-Mentat) of a maxillary central incisor were generated to evaluate the polymerization shrinkage stress of different materials for luting 0.3-mm CLVs with or without tooth preparation and the stress during functional loading by using a modified von Mises criterion (mvm). Collected data from Shr, KHN, and E were submitted to 2-way ANOVA and the Tukey HSD test (α=.05).ResultsLight attenuation by the 0.3-mm ceramic disk did not significantly affect the E values, but Shr was significantly lower in VE (26%) and TF (35%). TF had lower volumetric Shr (%) when interposing a ceramic disk (0.31%). Both tested tooth preparation options showed similar stress distributions from polymerization shrinkage or functional loading, with higher stress concentration on the incisal edge and also on the cervical surface. The model featuring tooth preparation and RV resin cement had the highest and VE the lowest stress levels.ConclusionsThe flowable composite resin had similar mechanical properties as the resin cements. The stress distribution from shrinkage and functional loading was similar for both techniques with or without tooth preparation.