Fracture behavior of structurally compromised non-vital maxillary premolars restored using experimental fiber reinforced composite crowns

PURPOSE: To study the fracture behavior of direct resin composite crowns with or without experimental fiber reinforcement. METHODS: Clinical crowns of single-rooted maxillary premolars were cut off at the cemento-enamel junction. Canals were prepared with Gates Glidden drills up to size 4. No additional post-space preparations were made. Roots were embedded in acrylic and canal entrances were standardized (depth 2 mm, diameter 1.75 mm). Three groups of 14 samples were treated as follows: (1) custom-made glass FRC post (EverStick Post); fibers 5 mm deep in the canal, (2) similar post-system as (1) with incorporation of a new type of glass fiber fabric, (3) no fiber reinforcement (control). Posts were cemented with resin cement (Panavia F). Resin composite crowns (Filtek Z250) were made using an anatomically formed mold. Static load until fracture was applied using a universal loading device with a cylindrical bar (diameter 2 mm) with a crosshead speed of 5 mm/minute (loading angle: 30 degrees to the tooth long-axis). Failure modes were categorized as favorable and unfavorable failures. RESULTS: There was no significant difference in mean failure loads among the four groups (P > 0.05). Favorable failures occurred significantly more often in Group 2 than in the other groups (P < 0.05). The results suggest that an incorporated glass fiber fabric does not affect the load-bearing capacity of resin composite complete crowns on structurally compromised and non-vital premolars. Incorporation of a glass fiber fabric, however, has a beneficial effect on the failure mode.     

Measuring Beliefs about Orthodontic Treatment: A Questionnaire Approach

Objectives : Few studies have examined what parents and orthodontists expect from and value about orthodontic treatment. In this study, we designed and tested a questionnaire to outline what drives consumer demand for children's orthodontic care. Further, we present data from the questionnaire to illustrate how expectations and values pertaining to orthodontic treatment relate to sociodemographic variables. Methods : Subjects were 220 Pennsylvania orthodontists and 220 parents at a university orthodontic clinic who were administered a questionnaire designed to assess what parents and orthodontists value about and expect from orthodontic treatment. Items for the questionnaire were developed via a qualitative, telephone interview process. Data were analyzed using factor analysis and reliability analysis for scale development, and analysis of variance for preliminary validity assessment. Results : Through factor analysis, the questionnaire was reduced from 84 to 52 items, and eight scales were examined: expected treatment benefits, expected treatment risks (short- and long-term), expected treatment inconveniences, value of treatment benefits, value of risks (short- and long-term), and value of treatment inconveniences. For parents, the reliability for all scales was in the acceptable range. For orthodontists, only the “short-term risks” scale failed to attain an acceptable reliability. Preliminary validity was assessed through examining relationships between demographic variables and subscale scores. For parents, income, father's education level, and sex of respondent were related to treatment expectations and values. For orthodontists, age, sex, and patient volume were related to treatment values. Conclusions : The questionnaire developed in the present study was found to be practical and reliable for use with providers and consumers of orthodontic care and can be used to explore factors affecting the demand for orthodontic care. Implications of possible unrealistic treatment expectations on the part of orthodontists and parents also are discussed.     

A mouthrinse which optimizes in vivo generation of hypothiocyanite

We report here the properties of a mouthrinse which enhances one of the natural defense factors in human saliva, the salivary peroxidase system. Concentrations of the antimicrobial agent, the hypothiocyanite (OSCN-) ion, can be increased in vivo to bacteriostatic levels by use of a mouthrinse which is 4 mM (0.014%) in hydrogen peroxide and 1 mM (0.0097%) in potassium thiocyanate at pH 5.5. The volume of the rinse, the H2O2 concentrations, and the pH were shown to be determinants of the concentration of OSCN- generated by the rinse.     

Biocompatibility of sealers used in apical surgery: a histological study in rat subcutaneous tissue

The aim of this study was to evaluate the biocompatibility of sealers used in apical surgery in rat subcutaneous tissue. Sterile polyethylene tubes were filled with the following sealers: Sealapex, Sealapex with addition of zinc oxide, Sealer 26, Sealer 26 with thicker consistency (greater powder-to-resin ratio) and White MTA. The tubes were implanted in the dorsum of male rats and after 7, 21 and 42 days, the animals were killed, obtaining 5 specimens for each sealer in each evaluation period. The lateral surface of the tube was used as negative control. The inflammatory reaction to contact with the sealers was classified as absent, mild, moderate and severe. At 7 days, all sealers caused similar inflammatory reactions in the connective tissue of the animals, with most specimens presenting a moderate to intense chronic inflammatory reaction, with presence of multinucleated giant cells. At 21 days, Sealer 26 and Sealer 26 with thicker consistency presented more intense inflammatory reaction (p=0.004), whereas after 42 days, the inflammatory reaction ranged from absent to mild with statistically similar results for both materials (p=0.08). Except for MTA, all sealers presented foreign-body granulomatous reaction at 42 days. All sealers but Sealapex presented a statistically significant decrease of the inflammatory reaction over time. In conclusion, all sealers caused moderate to severe inflammation in the earlier evaluation period. However, Sealer 26 and Sealer 26 with thicker consistency caused more intense inflammatory reactions after 21 days of contact with the tissues and no granulomatous reaction was observed for MTA at the final period of analysis.     

Signs and symptoms of temporomandibular disorders in children with different types of headache

Headache is a common symptom among children and teenagers. Both bruxism and muscle and joint tenderness have been found in children with headache. Children with migraine headache report more temporomandibular disorder (TMD) symptoms than do those with tension-type headache. The aim of the present study was to investigate the association of different types of headache with TMD and sex in children. Altogether 297 randomly selected schoolchildren aged 13-14 years participated in a blind study setting. There were no statistically significant differences between the headache groups with regard to TMD signs, although the migraine and migraine-type headache groups had the highest percentage of subjects with more severe TMD signs. Nor were there any statistical differences between sexes or between the headache groups with regard to subjective symptoms of TMD. The present results with children differed from earlier results with adults. First, no association was found between tension headache and TMD, and, second, no sex difference in TMD children was observed at this age.     

Parietal bone as graft material for maxillary sinus floor elevation: structure and remodeling of the donor and of recipient sites

Particulate parietal bone is used for maxillary sinus floor elevation procedure prior to dental implant placement. However, data on internal structure of the parietal bone and on graft remodeling and incorporation in the host bone are limited. We determined the structure and remodeling activities of 24 parietal bone specimens sampled at time of sinus grafting (T1 samples), and the amount and turnover of bone formed at the recipient site at time of implant placement (T2 samples, obtained 10 months after T1 samples, on average). In T1 samples, the outer cortex was 1.16+/-0.45 mm thick, had a typical haversian structure, and showed a low level of remodeling. In the cancellous portion of the samples, trabecular bone volume represented 52.8+/-10.3%. Bone remodeling was more active in the cancellous portion than in the cortical portion, but few osteoblasts and osteoclasts were seen. T2 samples consisted solely of trabecular bone, which occupied 49.4+/-18.4% of total sample volume. The boundary between new bone and the recipient bed was not discernible. Remnants of the graft particles were embedded within new bone, and showed signs of intense resorption. Bone remodeling was highly active, as shown by the presence of numerous osteoclasts resorbing new bone, together with thick osteoid seams and large osteoblasts. A loose cotton-like mineralized material was frequently observed in the marrow spaces; this acellular and non-collagenous material was strongly stained by toluidine blue, suggesting a glycoprotein nature. This study offers insights into cortical and trabecular bone structure and shows the low-level remodeling activity of parietal bone. About 10 months after grafting, the grafted chips were incorporated in new bone and almost completely resorbed. This high turnover may be beneficial for implant placement.     

Evaluation of hard tissue replacement composite graft material as a ridge preservation/augmentation material in conjunction with immediate hydroxyapatite-coated dental implants

BACKGROUND: Immediate placement of dental implants (DI) in fresh extraction sockets is associated with remaining voids around the DI and often a partial dehiscence or thin facial alveolar plate. Bone replacement grafts are often used to correct these problems. This study evaluated the use of a layered composite of PMMA (poly-methyl-methacrylate), PHEMA (poly-hydroxyl-ethyl-methacrylate), and calcium hydroxide grafts (HTR) as a ridge preservation/ augmentation material used in conjunction with an immediate DI placement technique. METHODS: Twenty-three patients requiring 1 or 2 extractions that were treatment planned for immediate DI placement received 4.0 or 3.25 mm diameter hydroxyapatite-coated cylindrical implants in the extraction sockets. HTR was used to fill the remaining socket void and enhance the facial ridge width. A collagen hemostatic was placed to cover the DI sites, flaps released, and primary closure attempted with sutures. DI uncovering was performed at about 6 months. Measurements were taken to the nearest 0.5 mm of the internal socket width and total ridge width at DI placement and uncovering. RESULTS: Thirty DIs were placed in the 23 patients. Mean initial internal socket width was 6.9 mm. The total ridge width showed a mean change from 9.1 mm to 8.4 mm; 60% of the areas showed a net increase or no change, while 40% showed a decrease in overall ridge width. DI success rate was 97% out to 6 months of loading. CONCLUSION: The results of this study suggest that HTR is a useful adjunct in the placement of immediate DIs for filling of socket voids and preservation of ridge width.