The effect of optical design on micromanipulator spot size using CO2 laser irradiation

Objective: The study goal was to compare the laser spot size created using reflective and refractive micromanipulators with a CO₂ laser and to determine the sensitivity of spot size to laser power. Study Design and Setting: A CO₂ laser and operating microscope (400-mm focal length) was coupled to either a reflective (Cassegrain-like) or refractive micromanipulator. Laser spot size was determined by measuring the region of ablation created by laser irradiation of wood (dry tongue depressors), exposed photographic film, and agar gel using optical micrometry. Laser power varied from 0.5 to 20 W with pulse durations of 0.1 and 0.5 second. Results: The reflective micromanipulator demonstrated overall smaller spot sizes for a given laser power and lower incremental change in spot size with increasing power. The reflective design demonstrated less sensitivity to increases in laser power. Conclusions: Micromanipulator optical design can result in significant differences in laser spot size. The reflective device used in this study demonstrated less sensitivity to increasing laser power. (Otolaryngol Head Neck Surg 2002;126:593-597.)     

Endoscopic pterygopalatine space surgery

Although lesions of the pterygopalatine space are uncommon, there are instances in which this relatively inaccessible region must be entered for biopsy or excision of masses. Traditional open approaches to the pterygopalatine space, involving external or intraoral incisions, provide limited visualization and carry associated morbidities. The evolution and advancement of endoscopic sinus surgical technique in recent years has led to its application to anatomic areas outside the strict limits of the sinonasal cavities. Such minimally invasive approaches are safe, effective, and spare unnecessary discomfort to the patient. This article describes the authors' method for performing an endoscopic approach to the pterygopalatine space.     

Mikrofrakturierung bei fokalem Knorpelschaden

The microfracture technique and spongiolization using Pridie drilling are the most commonly used and highly cost-efficient operative therapies for restoration of cartilage in Germany. Microfracturing can be performed arthroscopically in various joints including the knee, ankle, elbow, and shoulder joint. Specifically designed instruments are recommended for this procedure. Steadman recently reported excellent results in a series of 72 patients undergoing microfracturing with a mean follow-up of 11 years showing consistent and long-term reduction of weight-bearing pain and swelling as well as improvement of daily activities. Ideal indications for this easy arthroscopic procedure of microfracture treatment include focal lesions up to 4 cm². Some studies have demonstrated that microfracturing results not merely in the formation of fibrocartilage but also in the induction of hyaline cartilage with superior properties.     

Der Einsatz des Prophy-Jet®-Gerätes zur Schmelzpolitur nach der Bracketentfernung

Zusammenfassung In einer In-vitro-Studie wurde die Einsatzfähigkeit des Prophy-Jet-^®-Gerätes für die Schmelzpolitur nach Bracketentfernung untersucht. In die Studie wurden drei verschieden stark gefüllte orthodontische Kleber einbezogen: Concise^®, Genie^® und Mono Lok^®. Alle Proben wurden rasterelektronenoptisch untersucht und fotografisch dokumentiert in Vergrößerungen zwischen 20- und 10 000fach. Die Oberflächenanalyse ergab, daß das Prophy-Jet^®-Gerät allein zur Schmelzpolitur nach Bracketentfernung nicht ausreicht, um unter klinisch vertretbarem Zeitaufwand (1 Minute/Zahn) eine kunststofffreie Schmelzoberfläche zu erzielen. Nach konventioneller makroskopischer Vorreinigung mit Scalern oder rotierenden Hartmetallfinierern zeigten sich nach fünfsekündiger Prophy-Jet^®-Bestrahlung noch geringe Kleberreste. Nach zehnsekündiger Expositionsdauer waren beim Mono Lok^®-Adhäsiv keine Kleberreste mehr nachweisbar, beim Concise^®-bzw. Genie^®-Adhäsiv fanden sich noch vereinzelte geringe Kleberinseln. Das Prophy-Jet^®-Gerät erscheint zur Unterstützung der Schmelzpolitur nach Bracketentfernung sinnvoll; eine sorgfältige Vorreinigung mit Hand- oder rotierenden Instrumenten ist jedoch erforderlich, um eine weitgehende Adhäsivreduktion zu erreichen. Die konventionelle Gummi- und Bimssteinpolitur kann nach 20sekündiger Prophy-Jet^®-Bestrahlung entfallen.

---

Summary The purpose of this in vitro investigation was to ascertain the effects of the Prophy-Jet^® air-powder abrasive system for enamel polishing after debonding. Three adhesives differing in filler content were included in this study: Concise^®, Genie^®, and Mono Lok^®. All specimens were examined by scanning electron microscopy and documented photographically at magnifications from 20 to 10 000. Surface analysis showed that using the Prophy-Jet^® exclusively is not sufficient to produce a clean and smooth enamel surface without residual adhesive after debonding and after one minute of exposure time, as might be justifiable in a clinical situation. After macroscopic conventional clean-up with scalers or rotary finishing instruments and five seconds of exposure time to the Prophy-Jet^® some occasional adhesive remnants could be located. After ten seconds of Prophy-Jet^® treatment all Mono Lok^®-adhesive was removed from the enamel surface; in the Concise^® and Genie^®-group few isolated adhesive remnants could be detected. The Prophy-Jet^® air-powder abrasive system was found to be efficient in supporting enamel polishing after debonding; but an accurate pretreatment with scalers or rotary finishing instruments is essential to achieve an extensive reduction of adhesive. Final polishing of the enamel surface with rubber wheels or prophy cup and pumice can be omitted after treatment with the Prophy-Jet^® for 20 seconds.

---

Résumé Le but de ce travail était d'éxaminer à l'aide d'une étude in vitro, l'emploi du Prophy Jet^® pour le polissage de l'émail après l'arrachage des brackets. Dans l'étude on a analysé trois substances adhésives différentes: Concise^®, Genie^® et Mono Lok^®. Après avoir examiné les spécimens par le microscope électronique à balayage, on les a documentés à l'aide de photos d'un grossissement de 20 à 10 000. L'analyse de la surface montre que la seule application du Prophy Jet^® (après l'arrachage des brackets) ne suffit pas pour obtenir une surface d'émail sans substance adhésive en un temps clinique d'une minute par dent. Après prétraitement macroscopique selon la méthode conventionnelle (scaler ou instruments montés sur tour) il demeurait encore de petits restes de la substance adhésive après l'application du Prophy Jet^® pendant cinq secondes. Après une durée d'application de dix secondes, on ne pouvait pas déceler de restes de Mono Lok^®, tandis qu'il y avait sporadiquement des restes de Concise^® et Genie^®. Ces résultats indiquent, que le Prophy Jet^® est efficace pour le polissage de l'émail après l'arrachage des brackets, mais on a tout de même besoin d'un nettoyage précédent minutieux avec des instruments convenables (scaler ou instruments montés sur le tour) pour obtenir une réduction considérable de la substance adhésive. On peut renoncer au polissage conventionnel à l'aide de caoutchouc ou de la pierre ponce après l'application du Prophy Jet^® pendant 20 secondes.

---

---

Vortrag auf der wissenschaftlichen Jahrestagung der Deutschen Gesellschaft für Kieferorthopädie 1985.     

Andrologische Diagnostik

Andrology was included as a further subject for continuing education in the Model Ordinance on Continuing Education at the 106th German Physicians’ Meeting in Cologne in 2003. In addition to fertility disorders, this discipline comprises medical care for men with fertility disorders, erectile dysfunction, disorders of libido, ejaculation, and coitus, various forms of hypogonadism, and delayed puberty. Furthermore, this field also covers questions concerning male contraception, gynecomastia, and male senescence. Diagnostic procedures in andrology require close interdisciplinary cooperation with practitioners of gynecology, human genetics, and psychosomatic medicine. It includes medical history, clinical examination, and laboratory analyses. Except to confirm azoospermia, it is not possible to make a definitive prognosis for fertility based on semen analysis. Functional tests allow a better assessment of the spermatozoa’s fertility since 25–30% of men desiring a child exhibit reduced spermatozoal functions, which cannot be verified on routine semen analysis.