The Springer Model for Lifetime Prediction of Wind Turbine Blade Leading Edge Protection Systems: A Review and Sensitivity Study

The wind energy sector is growing rapidly. Wind turbines are increasing in size, leading to higher tip velocities. The leading edges of the blades interact with rain droplets, causing erosion damage over time. In order to mitigate the erosion, coating materials are required to protect the blades. To predict the fatigue lifetime of coated substrates, the Springer model is often used. The current work summarizes the research performed using this model in the wind energy sector and studies the sensitivity of the model to its input parameters. It is shown that the Springer model highly depends on the Poisson ratio, the strength values of the coating and the empirically fitted a2 constant. The assumptions made in the Springer model are not physically representative, and we reasoned that more modern methods are required to accurately predict coating lifetimes. The proposed framework is split into three parts—(1) a contact pressure model, (2) a coating stress model and (3) a fatigue strength model—which overall is sufficient to capture the underlying physics during rain erosion of wind turbine blades. Possible improvements to each of the individual aspects of the framework are proposed.     

Management of orthopedic oncology patients during coronavirus pandemic

The new measures implemented in hospitals also altered the operation of orthopedics and traumatology departments. The main purpose of this article is to discuss how orthopedic oncology clinics should be organized during the pandemic and to present the process management scheme for patients requiring orthopedic surgery, including trauma surgery, from diagnosis to treatment, together with our experiences. Instead of thinking about the global emergence of the epidemic, it is time to act decisively. At first glance, the coronavirus disease 2019 (COVID-19) pandemic and orthopedics may seem to be unrelated disciplines, but the provision of healthcare services to patients who require them proves that these two fields are parts of the same whole. Our experiences in treating neutropenic, lymphocytopenic, and chemotherapy patients seem to have proven beneficial during this process. We operated on 10 biopsy patients, 15 primary bone sarcomas, 9 soft tissue sarcomas, and 82 trauma patients within this time frame. Only three patients were suspected to have COVID-19 before admission. The early identification, strict isolation, and effective treatment of these patients prevented any nosocomial infections and disease-related comorbidities. This success is the result of the multidisciplinary cooperation of the Ministry of Health, our hospital, and our clinic.     

Does corticosteroid usage in rhinoplasty cause mood changes?

In this study, the psychological effects of single-dose corticosteroids administered to patients who had undergone rhinoplasty were assessed. A total of 30 rhinoplasty patients were included in the study and were randomly assigned to 1 of 2 groups. Preoperatively, patients completed the Bech Rafaelsen Mania Scale and the Beck Depression Inventory. Dexamethasone 10 mg was given intravenously just before surgery to the first group, but no medication was administered to the second group. On the first postoperative day, patients were seen again, and the Bech Rafaelsen Mania Scale and the Beck Depression Inventory were again completed. Periorbital edema and ecchymosis were graded, and psychological well-being was measured on a standard visual analog scale. All patients and physicians were blinded to treatment until the end of the study. Results show that administration of a single-dose of dexamethasone 10 mg caused neither euphoria nor depression. No significant differences were observed between steroid and control groups in terms of patients’ psychological well-being. With single-dose dexamethasone, periorbital edema was significantly reduced on the first 2 postoperative days, and upper eyelid ecchymosis was significantly decreased only on the first postoperative day. However, preoperative steroid administration had no influence on ecchymosis of the lower eyelid. The authors conclude that single-dose dexamethasone 10 mg can be used safely to reduce periorbital edema and ecchymosis in rhinoplasty patients.     

Comparison of Adhesive Properties of Five Different Prosthetic Materials Used in Hernioplasty

This experimental study was designed to assess and to compare intra-abdominal adhesions following the use of five commercially available prosthetic mesh grafts in the repair if abdominal wall defects. Sixty Wistar albino rats were randomly divided into six groups (n = 10). A 2 × 1 cm defect at abdominal wall was created and defects were closed either primarily or with one of the following prosthetic mesh grafts: monofilament polypropylene, polytetrafluoroethylene, sodium hyaluronate/carboxymethylcellulose-coated polypropylene, polypropylene/polyglactin 910 composite, or resorbable hydrophilic collagen-coated multifiber polyester. The severity of adhesions was graded, tensile strengths of adhesions were measured, and histopathological grades of inflammation and fibrosis were evaluated. Polypropylene mesh resulted in more adhesion formation in comparison to primary repair and other grafts used in this study, except polypropylene/polyglactin 910 composite mesh. In addition, the highest tensile strength of omental adhesions was detected in the polypropylene group (χ² = 26.249; p =. 0001). Polyester composite mesh caused the least adhesion formation among the groups. Sodium hyaluronate/carboxymethylcellulose-coated polypropylene and polyester composite meshes revealed the highest fibrosis scores (χ² = 50.776; p =. 0001). The highest inflammatory activity was detected in the polytetrafluoroethylene mesh group (χ² = 16.564; p =. 005). Thus, sodium hyaluronate/carboxymethylcellulose-coated polypropylene and polytetrafluoroethylene meshes following polyester composite mesh were the minimal adhesion-forming grafts in this study. Disadvantages of the polytetrafluoroethylene mesh were lower fibrotic activity and higher inflammatory reaction to the graft.     

Providing insights into atherosclerosis: A case of multivessel coronary artery disease with an anomalous straightforward vessel spared from atherosclerosis

Atherosclerotic plaques tend to involve arterial localizations in which blood flow is not laminar due to arterial bends and bifurcations. A 49-year-old man was admitted to hospital with breathlessness and was subsequently diagnosed with left ventricular failure. Coronary angiography revealed three-vessel coronary artery disease and an anomalous extra left anterior descending artery taking off from the right sinus of Valsalva and spared from atherosclerosis. The absence of side branches and the relative lack of bends in arterial geometry were considered to be the cause of resistance to atherosclerosis. The present case identifies local flow conditions as an important factor determining the genesis of atherosclerosis in arterial segments.     

Development of Composite,Reinforced, Highly Drug-Loaded Pharmaceutical Printlets Manufactured by Selective Laser Sintering—In Search of Relevant Excipients for Pharmaceutical 3D Printing

3D printing by selective laser sintering (SLS) of high-dose drug delivery systems using pure brittle crystalline active pharmaceutical ingredients (API) is possible but impractical. Currently used pharmaceutical grade excipients, including polymers, are primarily designed for powder compression, ensuring good mechanical properties. Using these excipients for SLS usually leads to poor mechanical properties of printed tablets (printlets). Composite printlets consisting of sintered carbon-stained polyamide (PA12) and metronidazole (Met) were manufactured by SLS to overcome the issue. The printlets were characterized using DSC and IR spectroscopy together with an assessment of mechanical properties. Functional properties of the printlets, i.e., drug release in USP3 and USP4 apparatus together with flotation assessment, were evaluated. The printlets contained 80 to 90% of Met (therapeutic dose ca. 600 mg), had hardness above 40 N (comparable with compressed tablets) and were of good quality with internal porous structure, which assured flotation. The thermal stability of the composite material and the identity of its constituents were confirmed. Elastic PA12 mesh maintained the shape and structure of the printlets during drug dissolution and flotation. Laser speed and the addition of an osmotic agent in low content influenced drug release virtually not changing composition of the printlet; time to release 80% of Met varied from 0.5 to 5 h. Composite printlets consisting of elastic insoluble PA12 mesh filled with high content of crystalline Met were manufactured by 3D SLS printing. Dissolution modification by the addition of an osmotic agent was demonstrated. The study shows the need to define the requirements for excipients dedicated to 3D printing and to search for appropriate materials for this purpose.     

The evaluation of safety and efficacy of colistin use in pediatric intensive care unit: Results from two reference hospitals and review of literature

Colistin, an old cationic polypeptide antibiotic, have been reused due to rising incidence of infections caused by multi-drug resistant (MDR) Gram-negative microorganisms and the lack of new antibiotics. Therefore, we evaluated safety and efficacy of colistin in treatment of these infections. This study included 104 critically ill children with a median age of 55,9 months between January 2011 and January 2016. Nephrotoxicity occurred in 11 (10.5%) patients. Nephrotoxicity occurred between the third and seventh day of treatment in 63% of colistin induced nephrotoxicity episodes. The subgroup analysis between the patients who developed nephrotoxicity during colistin treatment and those that did not, showed no significant difference in terms of age, underlying disease, cause for PICU admission and type of infection required colistin treatment, P values were 0.615, 0.762, 0.621, 0.803, respectively. All patients were receiving a concomitant nephrotoxic agent (P = 0,355). The majority of the patients (52%) were having primary or secondary immune deficiency in treatment failure group and the most common cause of PICU admission was sepsis in treatment failure group, P values were 0.007 and 0.045, respectively. Mortality attributed to colistin failure and crude mortality were 14.4% and 29.8%, respectively. In conclusion, colistin may have a role in the treatment of infections caused by multidrug-resistant Gram-negative bacteria in critically ill children. However, the patients have to be followed for side effects throughout colistin treatment, not for only early stage. And the clinicians should be aware of increase in the rate of nephrotoxicity in patients those have been receiving a concomitant nephrotoxic agent.     

Prognostic value of N-terminal pro-B-type natriuretic peptide in patients with active infective endocarditis

Our aim was to determine whether N-terminal pro-B-type natriuretic peptide (NT-pro-BNP) and cardiac troponin I (cTnI) levels are valuable for predicting prognosis in patients with infective endocarditis (IE). We analyzed measured plasma NT-pro-BNP levels at admission in 45 patients with definite IE. The primary end point was early surgery or in-hospital death. The other data recorded were baseline clinical, echocardiographic, and laboratory parameters. Thirty patients underwent early surgery, and 9 died in hospital. Univariate analysis revealed that log NT-pro-BNP, cTnI > or =0.03 ng/ml, New York Heart Association functional class III to IV symptoms, left atrial diameter, left ventricular end-diastolic diameter, left ventricular end-systolic diameter, and severe valvular regurgitation were associated with increased risk of reaching the primary end point. Cox proportional hazard regression analysis identified log NT-pro-BNP (hazard ratio 1.5; 95% confidence interval 1.2 to 1.9, p <0.001) as the only independent predictor of the primary end point. The log NT-pro-BNP cut-off value with the highest sensitivity (97%) and specificity (92%) for predicting primary end point was 7.2 (1,500 pg/ml). Patients with NT-pro-BNP level > or =1,500 pg/ml had significantly lower event-free survival than others. In conclusion, admission NT-pro-BNP is of prognostic value in patients with IE. The combination of admission NT-pro-BNP and cTnI levels appears to have even greater value for risk stratification in this patient group.