Screw angulation affects bone-screw stresses and bone graft load sharing in anterior cervical corpectomy fusion with a rigid screw-plate construct: a finite element model study

Background contextAnterior corpectomy and reconstruction with bone graft and a rigid screw-plate construct is an established procedure for treatment of cervical neural compression. Despite its reliability in relieving symptoms, there is a high rate of construct failure, especially in multilevel cases.PurposeThere has been no study evaluating the biomechanical effects of screw angulation on construct stability; this study investigates the C4–C7 construct stability and load-sharing properties among varying screw angulations in a rigid plate-screw construct.Study designA finite element model of a two-level cervical corpectomy with static anterior cervical plate.MethodsA three-dimensional finite element (FE) model of an intact C3–T1 segment was developed and validated. From this intact model, a fusion model (two-level [C5, C6] anterior corpectomy) was developed and validated. After corpectomy, allograft interbody fusion with a rigid anterior screw-plate construct was created from C4 to C7. Five additional FE models were developed from the fusion model corresponding to five different combinations of screw angulations within the vertebral bodies (C4, C7): (0°, 0°), (5°, 5°), (10°, 10°), (15°, 15°), and (15°, 0°). The fifth fusion model was termed as a hybrid fusion model.ResultsThe stability of a two-level corpectomy reconstruction is not dependent on the position of the screws. Despite the locked screw-plate interface, some degree of load sharing is transmitted to the graft. The load seen by the graft and the shear stress at the bone-screw junction is dependent on the angle of the screws with respect to the end plate. Higher stresses are seen at more divergent angles, particularly at the lower level of the construct.ConclusionThis study suggests that screw divergence from the end plates not only increases load transmission to the graft but also predisposes the screws to higher shear forces after corpectomy reconstruction. In particular, the inferior screw demonstrated larger stress than the upper-level screws. In the proposed hybrid fusion model, lower stresses on the bone graft, end plates, and bone-screw interface were recorded, inferring lower construct failure (end-plate fractures and screw pullout) potential at the inferior construct end.     

Streptolysin O enhances keratinocyte migration and proliferation and promotes skin organ culture wound healing in vitro

ML-05, a modified form of the hemolytic and cytotoxic bacterial toxin, streptolysin O, is currently being investigated as a treatment for collagen-related disorders such as scleroderma and fibrosis. Furthermore, ML-05 may be effective in promoting wound healing and alleviating the formation of hypertrophic scars and keloids. To investigate the effects of ML-05 on wound-healing processes, in vitro wound-healing scratch assays (using human primary epidermal keratinocytes and dermal fibroblasts) and a human skin organ culture wound model were utilized. ML-05 markedly enhanced keratinocyte migration and proliferation in wound scratch assays. ML-05 did not affect either proliferation or migration of dermal fibroblasts, indicating that ML-05's effects on cell migration/proliferation may be keratinocyte-specific. ML-05 was tested in a dose-dependent manner in a skin organ culture wound model using two different application methods: Through the culture media (dermal exposure) or direct topical treatment of the wound surface. ML-05 was found to accelerate wound healing as measured by reepithelialization, particularly after topical application. Therefore, ML-05 may have potential as a wound-healing agent that promotes reepithelialization through stimulation of keratinocyte migration and proliferation.     

Understanding the minimum clinically important difference: a review of concepts and methods.

BACKGROUND CONTEXT: The effectiveness of spinal surgery as a treatment option is currently evaluated through the assessment of patient-reported outcomes (PROs). The minimum clinically important difference (MCID) represents the smallest improvement considered worthwhile by a patient. The concept of an MCID is offered as the new standard for determining effectiveness of a given treatment and describing patient satisfaction in reference to that treatment. PURPOSE: Our goal is to review the various definitions of MCID and the methods available to determine MCID. STUDY DESIGN: The primary means of determining the MCID for a specific treatment are divided into anchor-based and distribution-based methods. Each method is further subdivided and examined in detail. METHODS: The overall limitations of the MCID concept are first identified. The basic assumptions, statistical biases, and shortcomings of each method are examined in detail. RESULTS: Each method of determining the MCID has specific shortcomings. Three general limitations in the accurate determination of an MCID have been identified: the multiplicity of MCID determinations, the loss of the patient's perspective, and the relationship between pretreatment baseline and posttreatment change scores. CONCLUSIONS: An ideal means of determining the MCID for a given intervention is yet to be determined. It is possible to develop a useful method provided that the assumptions and methodology are initially declared. Our efforts toward the establishment of a MCID will rely on the establishment of specific external criteria based on the symptoms of the patient and treatment intervention being evaluated.     

Biochemical analysis of human milk treated with sodium dodecyl sulfate, an alkyl sulfate microbicide that inactivates human immunodeficiency virus type 1.

Reduction of transmission of human immunodeficiency virus type 1 (HIV-1) through human milk is needed. Alkyl sulfates such as sodium dodecyl sulfate (SDS) are microbicidal against HIV-1 at low concentrations, have little to no toxicity, and are inexpensive. The authors have reported that treatment of HIV-1-infected human milk with < or = 1% (10 mg/mL) SDS for 10 minutes inactivates cell-free and cell-associated virus. The SDS can be removed with a commercially available resin after treatment without recovery of viral infectivity. In this article, the authors report results of selective biochemical analyses (ie, protein, immunoglobulins, lipids, cells, and electrolytes) of human milk subjected to SDS treatment and removal. The SDS treatment or removal had no significant effects on the milk components studied. Therefore, the use of alkyl sulfate microbicides to treat milk from HIV-1-positive women may be a simple, practical, and nutritionally sound way to prevent or reduce transmission of HIV-1 while still feeding with mother's own milk.     

Intracellular trafficking of fluorescently tagged proteins associated with pathogenesis in Candida albicans.

Proteins that enter the secretory pathway play important roles in virulence and pathogenesis in Candida albicans, but our understanding of the trafficking of these proteins is in its early stages. In Saccharomyces cerevisiae, dominant negative alleles of YPT1 and SEC4 interrupt secretory traffic at pre- and post-Golgi steps, respectively. We therefore used a dominant negative genetic approach to examine the intracellular trafficking of several proteins associated with virulence or azole resistance. When the dominant negative ypt1(N121I) allele of C. albicans was overexpressed, yellow-fluorescent protein (YFP) tagged forms of two plasma membrane transporters (Cdrlp and Ftrlp) and the vacuolar membrane ABC transporter Mltlp accumulated in intracellular structures that appeared related to the ER, but localization of Cdc10p and Int1p was unaffected. When the dominant negative sec4(S28N) allele of C. albicans was overexpressed, Cdrlp and Ftrlp accumulated intracellularly, and localization of Mltlp, Cdc10p and Int1p was unaffected. These results imply that (i) Cdrlp and Ftrlp are transported to the plasma membrane by the general secretory pathway, (ii) Mlt1p enters the secretory pathway but is diverted to the vacuole at an early post-Golgi step, and (iii) like Cdc10p, Int1p does not enter the general secretory pathway.     

Increasing muscle strength as a treatment for strabismus: sustained release of insulin-like growth factor-1 in rabbit extraocular muscle.

PURPOSE: Currently, no drug treatment is available for strengthening underacting extraocular muscles (EOM) in strabismus. We showed previously that single injections of insulin-like growth factor (IGF-1) result in significant but short-term increases in muscle force generation. This study examined the effects of sustained release of IGF-1 on force generation in rabbit superior rectus muscles. METHODS: In adult rabbits, slow-release pellets containing IGF-1 were implanted on the global side of one superior rectus muscle. After 1 week, or 1, 2, 3, or 6 months, treated and control muscles were examined for force generation using an in vitro physiology apparatus. All muscles were prepared for histology and mean myofiber cross-sectional areas were determined. RESULTS: One and 3 months after pellet implantation, treated muscles generated significantly greater force than contralateral control muscles, whereas at 2 months, no significant difference was found. Force per cross-sectional area (mN/cm(2)) at 3 months also increased significantly in the treated muscles. Mean muscle cross-sectional area increased significantly after 1, 2, and 3 months of sustained exposure to IGF-1 compared with controls. After an additional 3 months without IGF-1 exposure, mean cross-sectional areas were significantly greater than controls but significantly reduced compared with areas at 1, 2, and 3 months. CONCLUSIONS: IGF-1 appears to be highly effective in increasing muscle force generation. Because slow release of IGF-1 results in sustained increases in EOM force generation, it may be a potentially useful alternative to surgical resection procedures because it avoids many of the potential long-term biomechanical hazards of resection surgery.