Application of Mössbauer Spectroscopy for Identification of Iron-Containing Components in Upper Silesian Topsoil Being under Industrial Anthropopressure

The main objective of the presented preliminary study was the identification of iron-containing phases. Iron-containing phases had accumulated in organic topsoil horizons collected from an area that has long been affected by the steel industry and emissions from power plants. X-ray diffraction and Mössbauer spectroscopy methods were used for the determination of the iron-containing mineral phases in topsoil subsamples which, after two-staged separation, varied in terms of magnetic susceptibility and granulometry. The Mössbauer spectra were recorded using paramagnetic and magnetic components, although the latter occurred only in the strongly magnetic fraction. The central part of spectra was fitted by two doublets (D1 and D2), which were identified as aluminosilicates. Simultaneously, the experimental spectra were described using several Zeeman sextets (Z1, Z2, and Z3) corresponding to the occurrence of hematite and magnetite-like phases with iron in tetrahedral and octahedral sites. Identification of magnetic phases in the tested material, including hematite, led to the conclusion that soil contamination in the studied area was presumably caused by emissions from a nearby power plant. Magnetite-like phases with a different iron content detected in topsoil samples could be related to metallurgical and coking processes, reflecting the specificity of the industrial area from which the samples were taken. The specific composition of the iron-containing aluminosilicates also illustrated the intense and long-lasting impact of the steel and coking industries on the studied area.     

Characterization of W–Cr Metal Matrix Composite Coatings Reinforced with WC Particles Produced on Low-Carbon Steel Using Laser Processing of Precoat

The paper presents the study results of laser processing of precoat applied on C30 steel. The precoat consisted of powder mixtures with a binder in the form of water glass. Tungsten powder, chromium, and tungsten carbide (WC) were used to produce the precoat. The laser processing was carried out using a Yb:YAG disc laser with a rated power of 1 kW. Constant producing parameters (power of laser beam, 600 W; laser beam scanning rate, 400 mm/min) were applied. Chemical composition of the precoat was a variable parameter in coating production. A mixture consisting of 50% W and 50% Cr as a metal matrix was prepared. Subsequently, WC particles in weight ratios of 25%, 50%, and 75% were added to matrix. As a result, W–Cr metal matrix composite coatings reinforced with WC particles were formed. This study focused on investigation of microstructure, microhardness, phase, and chemical composition as well as corrosion and wear resistance, of the newly formed W–Cr/WC coatings. An instrumented nanoindentation test was also used in this study. As a result of laser beam action, the newly formed coatings had an interesting microstructure and good properties which were improved in comparison to substrate material. It is anticipated that the resulting coatings, depending on the treatment parameters (e.g., W–Cr/WC powder mixture) used, can be successfully applied to metal forming or foundry tools.     

Influence of the Selected Physical Modifier on the Dynamical Behavior of the Polymer Composites Used in the Aviation Industry

In this research, an analysis of polymer composite with the matrix of L285-cured hardener H286 and six reinforcement layers of carbon fabric GG 280 T was provided. It involved a comparison of the dynamical behavior responses for three cases of composite structures in the context of the presence of the mass share modifier. The samples with the addition of a physical modifier with varying mass percentages were investigated by being subjected to dynamic tests with specific parameters, i.e., constant excitation amplitude and vibration frequency in the vicinity of the base resonance zone. The analysis allowed for indicating the relationship between the composition of the prepared composites and their dynamic response via stiffness characteristics. In addition, the investigation resulted in determining the range of harmful dynamical operating conditions, which may contribute to damage to the composite structures.     

Same host,same lagoon,different transmission pathways: effects of exogenous factors on larval emergence in two marine digenean parasites

Due to their shallow and confined nature, lagoons provide excellent conditions for the transmission of digenean trematode parasites that require two or more intermediate hosts for the completion of their complex life cycles. However, these unstable environments are characterised by an internal heterogeneity and a large variation of a range of abiotic variables. We conducted a series of experiments in a comparative framework to assess the effect of a number of exogenous factors known to exhibit marked fluctuations in the lagoonal environment, i.e. temperature, salinity, water level and photoperiod, on larval emergence of two sympatric parasites, Cainocreadium labracis and Macvicaria obovata, which share the snail intermediate host, Gibbula adansonii, and a sit-and-wait downstream host-finding strategy. Our results demonstrated contrasting patterns and rates of larval emergence indicating an overall differential response of the two species to the variation of the environmental factors. Cercariae of M. obovata exhibited increased emergence rates at elevated temperature (with a sharp increase at 15 °C), decreased salinity (35–25 practical salinity units (psu)) and low water levels, whereas larval emergence of C. labracis was unaffected by the experimental variation in temperature and water level and showed decreased rates at decreased salinity levels (35–25 psu). The differential impact of the variable environmental conditions indicates the complexity of the patterns of exogenous control modifying parasite transmission and abundance in the lagoonal environment. Most importantly, the contrasting rhythms of larval emergence indicate endogenous control associated with the different transmission pathways of the two opecoelid digeneans.     

A risk of essential thrombocythemia in carriers of constitutional CHEK2 gene mutations

Germline mutations of the CHEK2 gene have been reported in some myeloid and lymphoid malignancies, but their impact on development of essential thrombocythemia has not been studied. In 16 out of 106 (15.1%) consecutive patients, newly diagnosed with essential thrombocythemia, we found one of four analyzed CHEK2 mutations: I157T, 1100delC, IVS2+1G>A or del5395. They were associated with the increased risk of disease (OR=3.8; P=0.002). The median age at ET diagnosis among CHEK2+/JAK2V617F+ patients was seven years lower than that among CHEK2-/JAK2V617F+ (52 vs. 59 years; P=0.04), whereas there was no difference in the medians of hematologic parameters between these groups. The results obtained suggest that CHEK2 mutations could potentially contribute to the susceptibility to essential thrombocythemia. The germline inactivation of CHEK2, as it seems, has no direct impact on the development of disease, but it could cause disruption of cell cycle checkpoints and initiate or support the cancerogenic process of essential thrombocythemia at a younger age.     

Immunopathology of exercise-induced bronchoconstriction in athletes — A new modified inflammatory hypothesis

Elite athletes have a higher prevalence of exercise-induced bronchoconstriction than the general population. The pathogenesis of exercise-induced bronchoconstriction is not fully elucidated. Increasing evidence suggests that airway inflammation plays a major role in the immunopathogenesis of exercise-induced bronchoconstriction. The aim of our review is to discuss existing evidence and to present a new, modified inflammatory hypothesis of exercise-induced bronchoconstriction. Exercise alters the number and function of circulating immune cells. Episodes of upper respiratory symptoms in elite athletes do not follow the usual seasonal patterns. Moreover, they have an unusual short-term duration, which suggests a non-infectious etiology. If the pro-inflammatory response to exercise has the potential to induce symptoms that mimic respiratory tract infection, it definitely up-regulates pro-inflammatory cytokine expression in the airways. We can conclude that exercise up-regulates airway cytokine expression in a way that favors inflammation and allergic reactions in bronchi and lowers the threshold for bronchoconstriction to different stimuli like cool, dry air, allergens, and pollutants.     

Comparison of the effects of bisphenol a alone and in a combination with X‐irradiation on sperm count and quality in male adult and pubescent mice

Bisphenol A (BPA) is employed in the manufacturing of epoxy, polyester‐styrene, and polycarbonate resins, which are used for the production of baby and water bottles and reusable containers, food and beverage packing, dental fillings and sealants. The study was designed to examine the effects of 8‐week exposure (a full cycle of spermatogenesis) to BPA alone and in a combination with X‐irradiation on the reproductive organs and germ cells of adult and pubescent male mice. Pzh:Sfis male mice were exposed to BPA (5, 10, and 20 mg/kg) or X‐rays (0.05 Gy) or to a combination of both (0.05 Gy + 5 mg/kg bw BPA). The following parameters were examined: sperm count, sperm motility, sperm morphology, and DNA damage in male gametes. Both BPA and X‐rays alone diminished sperm quality. BPA exposure significantly reduced sperm count in pubescent males compared to adult mice, with degenerative changes detected in seminiferous epithelium. This may suggest a higher susceptibility of germ cells of younger males to BPA action. Combined BPA with X‐ray treatment enhanced the harmful effect induced by BPA alone in male germ cells of adult males, whereas low‐dose irradiation showed sometimes protective or additive effects in pubescent mice. © 2013 Wiley Periodicals, Inc. Environ Toxicol 29: 1301–1313, 2014.     

Surface Testing of Dental Biomaterials—Determination of Contact Angle and Surface Free Energy

The key goal of this study was to characterize surface properties of chosen dental materials on the base on the contact angle measurements and surface free energy calculations. Tested materials were incubated in the simulated oral environment and drinks to estimate an influence of conditions similar to those in the oral cavity on wetting and energetic state of the surface. Types of materials were as follows: denture acrylic resins, composite and PET-G dental retainer to compare basic materials used in a prosthetics, restorative dentistry and orthodontics. The sessile drop method was used to measure the contact angle with the use of several liquids. Values of the surface free energies were estimated based on the Owens–Wendt, van Oss–Chaudhury–Good and Zisman’s methods. The research showed that surface wetting depends on the material composition and storage conditions. The most significance changes of CA were observed for acrylic resins (84.7° ± 3.8° to 65.5° ± 3.5°) and composites (58.8° ± 4.1° to 49.1° ± 5.7°) stored in orange juice, and for retainers (81.9° ± 1.8° to 99.6° ± 4.5°) incubated in the saline solution. An analysis of the critical surface energy showed that acrylic materials are in the zone of good adhesion (values above 40 mJ/m²), while BIS-GMA composites are in the zone of poor adhesion (values below 30 mJ/m²). Study of the surface energy of different dental materials may contribute to the development of the thermodynamic model of bacterial adhesion, based on the surface free energies, and accelerate the investigation of biomaterial interaction in the biological environment.