Evaluation of hard tissue replacement composite graft material as a ridge preservation/augmentation material in conjunction with immediate hydroxyapatite-coated dental implants

BACKGROUND: Immediate placement of dental implants (DI) in fresh extraction sockets is associated with remaining voids around the DI and often a partial dehiscence or thin facial alveolar plate. Bone replacement grafts are often used to correct these problems. This study evaluated the use of a layered composite of PMMA (poly-methyl-methacrylate), PHEMA (poly-hydroxyl-ethyl-methacrylate), and calcium hydroxide grafts (HTR) as a ridge preservation/ augmentation material used in conjunction with an immediate DI placement technique. METHODS: Twenty-three patients requiring 1 or 2 extractions that were treatment planned for immediate DI placement received 4.0 or 3.25 mm diameter hydroxyapatite-coated cylindrical implants in the extraction sockets. HTR was used to fill the remaining socket void and enhance the facial ridge width. A collagen hemostatic was placed to cover the DI sites, flaps released, and primary closure attempted with sutures. DI uncovering was performed at about 6 months. Measurements were taken to the nearest 0.5 mm of the internal socket width and total ridge width at DI placement and uncovering. RESULTS: Thirty DIs were placed in the 23 patients. Mean initial internal socket width was 6.9 mm. The total ridge width showed a mean change from 9.1 mm to 8.4 mm; 60% of the areas showed a net increase or no change, while 40% showed a decrease in overall ridge width. DI success rate was 97% out to 6 months of loading. CONCLUSION: The results of this study suggest that HTR is a useful adjunct in the placement of immediate DIs for filling of socket voids and preservation of ridge width.     

Endodontic therapy associated with calcium hydroxide as an intracanal dressing: microbiologic evaluation by the checkerboard DNA-DNA hybridization technique

This study evaluated the predominant microbiota of infected necrotic pulps and the effects of calcium hydroxide therapy on these microorganisms by the checkerboard DNA-DNA hybridization technique. Conventional endodontic therapy associated with calcium hydroxide as intracanal dressing was performed in 12 single-rooted teeth with pulp necrosis and periradicular bone lesion. Samples were collected from the canal at baseline and 14 days after therapy, and the presence of 44 bacterial species was determined by the checkerboard method. Significant differences in the microbiota from baseline to post-therapy were sought by the paired-samples t test. The most prevalent species included F. nucleatum ss. vincentii, C. sputigena, C. ochracea, S. constellatus, V. parvula, P. gingivalis, P. melaninogenica, and S. sanguis. Most of the microorganisms were reduced after treatment, particularly A. gerencseriae, A. israelii, A. naeslundii, C. gingivalis, C. ochracea, P. gingivalis, S. noxia, S. sanguis, and S. oralis (p < 0.05). Conversely, A. actinomycetemcomitans, C. sputigena, and E. corrodens increased in numbers after therapy. These results indicate that conventional endodontic therapy with calcium hydroxide results in the reduction of pathogenic species associated with pulp necrosis. However, its use is limited, because it did not eliminate the whole spectrum of microorganisms.     

Microtensile bond strength of light- and self-cured adhesive systems to intraradicular dentin using a translucent fiber post

This study evaluated the bond strength of a light- and self-cured adhesive system to different intraradicular dentin areas (cervical, middle and apical thirds). Twenty single-rooted teeth were instrumented and their roots were prepared to receive a #2 translucent fiber post (Light Post). The root canals were irrigated with 0.5% sodium hypochlorite for one minute, rinsed with water and dried using paper tips. The teeth were divided into two groups (n=10): Single Bond [SB] (light-cured) and Scotchbond Multi-Purpose Plus [SBMP] (self-cured). To avoid polymerization of the materials through the root lateral walls, the teeth were placed in a silicone mold and the adhesives applied with a thin microbrush according to manufacturer's instructions. The resin cement, Rely X ARC, was inserted into the root canals using Lentulo burs. The post was then placed and the light-curing procedure was carried out for 40 seconds (+/-500 mW/cm2). The roots were kept in a 100% relative moisture environment for 24 hours and stored in distilled water for an additional 24 hours. Each root was perpendicularly sectioned into 1-mm thick sections, resulting in approximately four slices per region. Dumbbell-shaped slices were obtained by trimming the proximal surfaces of each slice using a diamond bur until it touched the post. The bonded area was calculated, slices were attached to a special device and submitted to microtensile testing at 1 mm/minute crosshead speed. Data were analyzed using ANOVA and Tukey's test. The mean bond strength values (MPa) were: SBMP: cervical=10.8a, middle=7.9b%, apical=7.1bc; SB: cervical=8.1b, middle=6.0c, apical=6.9b. Significant differences were found between adhesive systems only for the cervical third. The cervical region showed higher mean bond strength values than the middle and apical regions (p<0.0001).     

Microhardness of resin-based materials polymerized with LED and halogen curing units

The purpose of this study was to evaluate the microhardness of resin-based materials polymerized with a LED (light-emitting diode) light-curing unit (LCU) and a halogen LCU. Twenty cylindrical specimens (3.0 mm in diameter and 2.0 mm high) were prepared for each tested material (Z100, Definite and Dyract). Specimens were light-cured with two LCUs (Ultraled and Curing Light 2500) for either 40 or 60 s on their top surfaces. Hardness was measured on top and bottom surfaces of each specimen. Statistical analysis was done by ANOVA and Tukey's test (p<0.05). There was no significant difference in hardness between LED LCU and halogen LCU for Z100 and Dyract on top surface. Conversely, lower hardness was recorded when Definite was light-cured with the LED LCU than with the halogen lamp. On bottom surface, hardness was significantly lower for all materials light-cured with LED LCU. Z100 was harder than Dyract and Definite regardless of the light curing unit. There was no significant difference in hardness between the exposure times on top surface. Higher hardness was obtained when the materials were light-cured for 60 s on bottom surface. The tested LED was not able to produce the same microhardness of resin-based materials as the halogen LCU.     

Evaluation of the bleached human enamel by Scanning Electron Microscopy

Since bleaching has become a popular procedure, the effect of peroxides on dental hard tissues is of great interest in research. Purpose: The aim of this in vitro study was to perform a qualitative analysis of the human enamel after the application of in-office bleaching agents, using Scanning Electron Microscopy (SEM). Materials and Methods: Twenty intact human third molars extracted for orthodontic reasons were randomly divided into four groups (n=5) treated as follows: G1- storage in artificial saliva (control group); G2- four 30-minute applications of 35% carbamide peroxide (total exposure: 2h); G3- four 2-hour exposures to 35% carbamide peroxide (total exposure: 8h); G4- two applications of 35% hydrogen peroxide, which was light-activated with halogen lamp at 700mW/cm2 during 7min and remained in contact with enamel for 20min (total exposure: 40min). All bleaching treatments adopted in this study followed the application protocols advised by manufacturers. Evaluation of groups submitted to 35% carbamide peroxide was carried out after two time intervals (30 minutes and 2 hours per session), following the extreme situations recommended by the manufacturer. Specimens were prepared for SEM analysis performing gold sputter coating under vacuum and were examined using 15kV at 500x and 2000x magnification. Results: Morphological alterations on the enamel surface were similarly detected after bleaching with either 35% carbamide peroxide or 35% hydrogen peroxide. Surface porosities were characteristic of an erosive process that took place on human enamel. Depression areas, including the formation of craters, and exposure of enamel rods could also be detected. Conclusion: Bleaching effects on enamel morphology were randomly distributed throughout enamel surface and various degrees of enamel damage could be noticed. Clinical significance: In-office bleaching materials may adversely affect enamel morphology and therefore should be used with caution.     

Comparison among dental, skeletal and chronological development in HIV-positive children: a radiographic study

The goal of this study was to evaluate skeletal, dental and chronological development in an HIV-positive group of children, as compared with a control group, during a four-year period. Panoramic radiographs and hand and wrist radiographs of 60 children were taken. The children, of both sexes, aged 5 years and 2 months to 15 years and 5 months, were selected as follows: 30 HIV-positive volunteers who had acquired the disease vertically, and 30 volunteers who did not present the HIV infection or any other systemic disease. All radiographs were technically standardized and analyzed according to criteria established by Nolla (dental age), Greulich and Pyle (bone age), and Ekl?f and Ringertz (bone age). The results were submitted to Student's t-test at a 5% level of significance. Based on the comparison between the chronological age and the dental or the skeletal age, significant differences were observed between HIV-positive and HIV-negative children, both in 1999 and in 2003 (p < or = 0.05). Considering the results obtained with the methodology used, it was concluded that HIV-positive children of both sexes presented delayed bone development despite the administration of antiretroviral drugs, and that HIV-positive female children presented younger dental ages compared with their chronological ages in 1999 and in 2003; and HIV-positive males, in 1999.     

A comparison between cutting torque and resonance frequency in the assessment of primary stability and final torque capacity of standard and TiUnite single-tooth implants under immediate loading

PURPOSE: In this study, standard Br?nemark System implants and Br?nemark TiUnite implants were evaluated regarding primary stability and placement torque. The correlation between placement torque and primary stability as well as the influence of implant design on placement torque and primary stability were examined. MATERIALS AND METHODS: Twelve patients who presented bilateral loss of either maxillary lateral incisors or premolars were treated with 24 immediately loaded dental implants. Each patient received 1 standard 3.75 x 13-mm Br?nemark System implant and one 3.75 x 13-mm TiUnite Mk III implant. One at a time, each implant was connected by a transducer to an Osstell machine that automatically translated a resonance frequency value for the implant into an implant stability quotient value. Osseocare equipment was used to measure the placement torque for both types of implants. RESULTS: Statistical analysis showed higher mean values for standard implants in relation to placement torque and resonance frequency values. DISCUSSION: There was no overall correlation between placement torque and resonance frequency values; this finding supported previous studies. CONCLUSION: Stability was shown to be higher for the standard implants. Mean values of torque resistance were higher for the standard implants than for the TiUnite implants. Implant design appeared to influence primary stability and placement torque.     

A school-based oral health educational program: the experience of Maringa- PR, Brazil

The main purpose of this study was to evaluate the preliminary results of a school-based oral health educational strategy adopted in public primary schools from the city of Maringa, State of Parana, Brazil. The study sample was composed by 556 children and adolescents aged 6 to 17 years old, 124 schoolteachers and a group of 55 mothers. The educational approach was implemented for 18 months and consisted of reinforcements of interventions addressed to students and schoolteachers at school level and few activities targeted at the mothers, performed by means of home visits. Baseline and follow-up interviews focused on oral health care were undertaken for the entire study population. As a stimulus for the students to achieve proper oral hygiene habits, the simplified oral hygiene index was assessed at three different moments. A statistically significant improvement in their oral hygiene index (p<0.001) was recorded. The results achieved suggest an encouraging tendency towards the improvement in the levels of oral health care among the school-age youths studied. They also point out the need of intensifying the preparation of schoolteachers in oral health topics, as well the instructions to the mothers for their oral health care. Moreover, they highlight the importance of the continuous implementation of school-based programs to promote the oral health.     

Analysis of the condyle/fossa relationship before and after prosthetic rehabilitation with maxillary complete denture and mandibular removable partial denture

STATEMENT OF PROBLEM: The influence of the loss of posterior teeth on the condylar position and on temporomandibular disorders (TMDs) remains a controversial issue. PURPOSE: This study investigated whether prosthetic rehabilitation promoted modification of the condylar position in subjects without symptoms of TMDs. MATERIAL AND METHODS: The temporomandibular joints (TMJs) of 12 women (age 37 to 74), all with existing maxillary complete dentures but no removable partial denture (RPD) restoring the Kennedy class I partially edentulous mandibular arch and no clinical signs of TMDs according to the criteria established by Helkimo, were viewed in maximal intercuspal position with corrected lateral tomography before and after prosthetic rehabilitation with a new maxillary complete denture and a mandibular RPD. Before prosthetic rehabilitation, a mandibular stabilizing base was fabricated to prevent the existing maxillary complete denture from dislodging during tomographic examination. Two methods were used to evaluate tomograms: (1) linear measurements of the subjective narrowest anterior and posterior intra-articular joint spaces made from the tomograms by use of a digital caliper and (2) linear measurements of the anterior and posterior intra-articular joint spaces on the basis of drawings and tracings. Repeated-measures analysis of variance followed by orthogonal contrasts were used to evaluate differences between measurements carried out on the same subject under the different test conditions of the study (before prosthetic rehabilitation, before prosthetic rehabilitation with a mandibular stabilizing base in position, and after prosthetic rehabilitation) (P<.05). RESULTS: Before prosthetic rehabilitation, a predominance of posterior condylar positions was observed. Before prosthetic rehabilitation with a mandibular stabilizing base in position, a significant decrease was observed in posterior condylar positions (P=.03). This decrease was more marked after prosthetic rehabilitation (P=.02). The subjective evaluation and comparison on the basis of drawings and tracings used to analyze the tomograms produced similar results (P=.70). CONCLUSION: Within the limitations of this study, significant changes in the condylar position occurred after prosthetic rehabilitation in subjects without symptoms of TMDs.