Simultaneous M-mode echoesophagram and manometry in the sheep esophagus

We report the simultaneous measurement of esophageal wall layer thickness and intraluminal pressure in the sheep esophagus using a miniature suction device incorporating a high-frequency ultrasound transducer and a manometry system. Transnasal placement of the device into the distal esophagus of a conscious sheep allowed observation of 133 swallowing events during three trials, each lasting from 45 to 60 minutes. In a fourth trial, 11 sequential dry and 23 sequential wet swallows were compared. Maximum manometric pressure, esophageal wall layer thickness, and duration of contraction were measured. All swallowing events produced simultaneous increases in intraluminal pressure and esophageal wall thickness. Mean maximal pressures were lower for dry swallows (18 ± 2.1 mm Hg) than wet swallows (22 ± 3.0 mm Hg) (p < .01). Thickness of the inner (circular) muscle layer increased above baseline by 124% for dry swallows and 161% for wet swallows (p < .01). We conclude that thickening of the esophageal inner (circular) muscle layer may be important in the generation of intraluminal esophageal pressure in the sheep esophagus. (Gastrointest Endosc 1995;41:582-6.)     

Surface treatment of indirect resin composite surfaces before cementation

Statement of problem. Controversy surrounds the use of hydrofluoric acid to prepare precementation surfaces of indirect composites.Purpose. This study was conducted to compare effects of combining hydrofluoric or orthophosphoric acid with microetching as precementation treatments.Material and methods. Nine specimens of three composite materials were prepared to simulate heat-cured indirect restorations. The specimen surfaces were prepared with one of three treatments. Adhesive Bond II and Twinlook cements were used to bond a phosphoric acid-etched disk of P50 to the treated surface. Analysis of variance and Scheffé tests were used to assess the bond strength data. Scanning electron microscopy and microscopic analysis of the fractured and treated surfaces were also performed.Results. Bond strengths for all surface treatments did not significantly differ. Hybrids had a higher bond strength with etching than microfills, and mechanical roughening produced the greatest bond strengths with microfills. Microetching with orthophosphoric acid produced higher bond strengths than microetching with hydrofluoric acid on hybrids.Conclusions. Acid etching alone is not sufficient to produce effective bond strengths, and hydrofluoric acid treatments are detrimental to the resin composite. (J Prosthet Dent 1997;77:568-72.)     

Transfer of lumbosacral load to iliac bones and legs Part 1: Biomechanics of self-bracing of the sacroiliac joints and its significance for treatment and exercise

This study deals primarily with the stability of the base of the spine. The sacroiliac joints are vulnerable to shear loading on account of their predominantly flat surfaces. This raises the question of what mechanisms are brought into action to prevent dislocation of the sacroiliac joints when they are loaded by the weight of the upper part of the body and by trunk muscle forces. First a model is introduced to compare load transfer in joints with spherical and with flat joint surfaces. Next we consider a biomechanical model for the equilibrium of the sacrum under load, describing a self-bracing effect that protects the sacroiliac joints against shear according to ‘the sacroiliac joint compression theory’, which has been demonstrated in vitro. The model shows joint stability by the application of bending moments and the configuration of the pelvic arch. The model includes a large number of muscles (e.g. the gluteus maximus and piriformis muscles), ligaments (e.g. the sacrotuberous, sacrospinal, and dorsal and interosseous sacroiliac ligaments) as well as the coarse texture and the ridges and grooves of the joint surfaces.