颈椎前路椎体间微创融合器的生物力学实验研究

目的评价植入镍钛记忆合金微创融合器(NiTi-TFC/C)的颈椎节段的稳定性及压缩力学性能。方法采集24只羊颈椎标本随机分为4组,每组6份,四组处理分别为:单取髓核组、自体髂骨植骨组、微创融合器组和钛制融合器组(InterFix)。所有标本进行前路减压,并对后3组进行椎间融合术。分别对各组标本进行生物力学测试并进行比较。结果微创融合器组与钛制融合器组在强度、刚度及扭转力学等方面无显著性差异(P>0.05)。而微创融合器组与自体髂骨植骨组具有显著性差异(P<0.05)。最大承载力为12050N。结论该微创融合器强度大、刚度高、抗扭转能力强,具有良好的抗压能力,为颈椎融合提供新型的融合装置。     

Determination of Copy Number of rRNA Genes in Pneumocystis carinii f. sp. hominis

Differential PCR was performed to determine the copy number of rRNA genes in Pneumocystis carinii f. sp. hominis. Two different reference genes, thymidylate synthase (TS) and beta-tubulin (BTU) genes, were used. Primers for the internal transcribed spacer (ITS) region of nuclear rRNA genes and either the TS or BTU gene were mixed together to perform PCR on seven different bronchoalveolar lavage specimens from patients with P. carinii pneumonia. The radioactivity derived from the incorporated radioactive nucleotides of each PCR product band was then used to calculate the copy number of the ITS relative to that of the TS or BTU gene. The copy number ratio between the ITS and the TS gene was determined to be 0.8, and that between the ITS and the BTU gene was also 0.8. These results suggest that the ITS has the same copy number as the TS or BTU gene. Since the copy number of the TS or BTU gene is presumed to be 1, the results also suggest that P. carinii f. sp. hominis has only one copy of the ITS and thus one copy of the nuclear rRNA genes. Therefore, two types of ITS sequences derived from a specimen would indicate that the patient is infected by two types of P. carinii f. sp. hominis.     

Differential response to chemically altered polyethylene by activated mature human monocyte-derived macrophages

Macrophages and polyethylene (PE) particulate are currently recognized as being the two common denominators in the development of chronic inflammation, periprosthetic osteolysis, and subsequent implant failure. In this study, the effect of PE particulate surface chemistry on mature human monocyte-derived macrophage (MDM) function was investigated. Virgin high-density PE (HDPE: 4-10 microm) and HDPE oxidized by irradiation, thermal and chemical treatment were characterized by FT-IR and suspended in soluble type I collagen, which was subsequently solidified on glass coverslips. Human MDMs, derived from differentiating monocytes on polystyrene for 14 days, were trypsinized and cultured on collagen-particle substrata and collagen controls for 31 days. Analysis of conditioned media collected at 24h incubation showed a significantly higher level of IL-1beta secretion in virgin HDPE over oxidized HDPE or collagen controls, and a significant inhibition of IL-6 secretion in both virgin and oxidized samples. Esterase activity was increased in the medium at a significantly higher level in the virgin HDPE versus controls with the highest activity observed in oxidized HDPE at 31 days. These results illustrate the effect of PE particle surface chemistry (oxidation) on MDM cytokine secretion and esterase activity, and highlight the need to further investigate the potential of PE surface chemistry on modulating MDM function.     

重组卡介苗及猪苓多糖对荷瘤小鼠巨噬细胞NO释放量的影响

目的 观察重组卡介苗（rBCG)和中药猪苓多糖（PPS），对荷瘤小鼠空巨噬细胞释放NO的影响。方法 将黑色素瘤细胞株B16接种于小鼠左大腿外侧皮下，建立荷瘤小鼠模型，分别用rBCG－IL-2,rBCG-IL-2 PPSPPS进行局部治疗。于给药后第1，2，3和5wk处死小鼠，用NO酶法测定小鼠腹腔巨噬细胞释放NO的水平，并观察不同实验组瘤体的变化。结果 rBCG－IL－2组小鼠腹腔巨噬细胞释放NO的水平最高。与对照组相比较，PPS组小鼠腹腔巨噬细胞释放NO的水平在第1wk与第2wk增高，第3wk起与对照组释放的NO水平没有差异。rBCG－IL－2组小鼠随给药时间的延长，皮下瘤体逐渐缩小。PPS组小鼠瘤体在给药后第1wk和第2wk生长缓慢，第3wk起瘤体生长速度明显增加。结论 rBCG－IL－2与PPS能提高小鼠腹腔巨噬细胞释放NO的水平，rBCG－IL－2能明显抑制肿瘤生长。     

Specific immunoglobulin g antibody detected in umbilical blood and amniotic fluid from a pregnant woman infected by the coronavirus associated with severe acute respiratory syndrome

Specific immunoglobulin G antibody for severe acute respiratory syndrome (SARS) coronavirus was detected in maternal blood, umbilical blood, and amniotic fluid from a pregnant SARS patient. Potential protection of fetus from infection was suggested.     

耳穴静态电测量中的瞬变响应

耳穴电参数时变关系实验表明，在测量起始ｔ＜２τ时，因瞬变作用，电位Ｅ（ｔ）和压降Ｕ（ｔ）为瞬态响应，响应函数呈指数关系，特征参数为弛豫时间τ，τ≈ＲＣ；ｔ＞２τ时，为时变间期。电路分析给出数学描述，并与耳穴和模拟实验结果较相符。提示，时变特征应以ｔ＞２τ后提取，静态电测量时，采样应避开瞬变期，可提高准确性。该工作对正确鉴别时变性和特征提取，全面认识耳穴电特性具有重要意义。     

几种常用自陈主观幸福感量表在我国城市居民中的试用报告

本研究考察了几种常用自阵主观幸福感表在我国城市居民中的试用情况。表明，除情感平衡量表外，中国人幸福感量表，总体生活满意感量表和删改后夏普量表，对测量我国居民主观幸福感都有一定的实用或参考价值，但从根本上讲编订一套适用于我国居民的主观幸福感量表是很有必要的。     

可切削渗透陶瓷玻璃料对不同堆积密度氧化铝基体的渗透

探讨了可切削渗透陶瓷 (Infiltration of Machinable- infiltrated- ceramic,MIC)渗透玻璃在不同堆积密度氧化铝基体中的渗透情况及渗透后复合体的颜色表达。在 110 0℃保温 2 h,将玻璃渗透到不同堆积密度的氧化铝基体中 ,分别测得其渗透深度和颜色参数。扫描电镜观察玻璃—氧化铝复合体断面。玻璃渗透深度的平方与氧化铝堆积密度有直线负相关关系 ,最小渗透深度为 3.0 92 m m。复合体的颜色系数与氧化铝堆积密度无相关性。渗透复合体在断裂过程中可见 :裂纹偏转、晶体拔出和穿晶断裂。本实验证实 MIC渗透玻璃的渗透性能达到临床要求。渗透后的复合体颜色稳定 ,强度可靠