BoneMorphing versus freehand localization of anatomical landmarks: consequences for the reproducibility of implant positioning in total knee arthroplasty.

OBJECTIVE: This study analyzed the influence of the acquisition method in image-free computer-assisted total knee arthroplasty (CAS-TKA), and the reproducibility of implant planning using BoneMorphing, a 3D morphometric model obtained by a 3D-to-3D elastic registration of statistical models to sparse point clouds acquired directly on the bone surface with a pointer. MATERIALS AND METHODS: Five surgeons (one expert, four trainees) each performed a CAS-TKA hybrid protocol based on morphometric models and landmarks on a cadaveric knee 10 times. In addition, several additional landmarks were digitized during each acquisition. The reproducibility of the implant positioning and sizing, as determined by an implant planning algorithm with morphometric models, was compared to direct digitization accuracy. RESULTS: Femoral and tibial implant positioning parameters with the hybrid protocol resulted in intra-surgeon standard deviations (SDs) of less than+/-1.4 degrees for rotation and 1.9 mm for translation for all surgeons in all directions except for tibial axial rotation (the only parameter determined by a digitized landmark and not recomputed in the 3D model). The variability in individual landmark digitization varied from 2 to 5 mm SD for certain landmarks, with ranges of 15-25 mm across all surgeons. The comparison study showed an improvement in femoral rotation reproducibility with the morphometric model when using the posterior condylar axis. Tibial implant reproducibility for each method was comparable, with the morphometric model giving better results in well-digitized areas such as the tibial plateau. CONCLUSION: A CAS-TKA protocol based on a deformed statistical model offers reproducible implant positioning. Some landmarks, such as distal condyles, show sufficient reproducibility in the direction of interest, while others, such as the anterior tibial tubercle, can lead to hazardous implant positioning. This should be taken into consideration when designing a CAS-TKA system with bony landmarks. In areas where a sufficient number of points have been digitized with good coverage, such as on the distal and posterior femoral condyles or the tibial plateau areas, the information derived from the 3D model is more accurate and reproducible than that derived from digitization. Good training and a guiding user interface are essential to guarantee coverage quality.     

Monitoring of central venous oxygen saturation versus mixed venous oxygen saturation in critically ill patients

Continous monitoring of mixed venous (SvO₂) and central venous (ScO₂) oxygen saturation was compared in 7 critically-ill patients (Apache II score: 19±2.1) to determine whether or not information derived from ScO₂ were reliable in clinical practice. Patients were catheterized with both a pulmonary artery (PA) and a central venous (CV) catheter, each of them mounted with fiberoptic sensors (Opticath PA Catheter P7110 and Opticath CV Catheter U440, Abbott). A total of 580 comparative measurements were obtained during periods without and with therapeutic interventions (drug-titration, bronchial suction, use of PEEP, changes in FiO₂...). The systematic error between the 2 measurement techniques was 0.6% and 0.3% in periods with and without therapeutic interventions, respectively. The variability between the 2 techniques was 10% for both periods. Differences between the values were 5% in 49% of values during periods of stability and in 50% of values during periods with therapeutic interventions. There were poor correlations between the values during periods without (r=0.48) and with therapeutic interventions (r=0.62). Better, but still less than ideal, correlations were obtained with changes in SvO₂ and ScO₂ during periods without (r=0.70) and with therapeutic interventions (r=0.77). Although there is a need to develop a simple technique to monitor mixed venous oxygen saturation, the present study indicates that ScO₂ monitoring was not reliable in the study patients.     

Reliability and validity of the Biodex system 3 pro isokinetic dynamometer velocity,torque and position measurements

This study quantitatively assessed the mechanical reliability and validity of position, torque and velocity measurements of the Biodex System 3 isokinetic dynamometer. Trial-to-trial and day-to-day reliability were assessed during three trials on two separate days. To assess instrument validity, measurement of each variable using the Biodex System 3 dynamometer was compared to a criterion measure of position, torque and velocity. Position was assessed at 5° increments across the available range of motion of the dynamometer. Torque measures were assessed isometrically by hanging six different calibrated weights from the lever arm. Velocity was assessed (30°/s to 500°/s) across a 70° arc of motion by manually accelerating the weighted lever arm. With the exception of a systematic decrease in velocity at speeds of 300°/s and higher, the Biodex System 3 performed with acceptable mechanical reliability and validity on all variables tested.DisclosureThe Biodex dynamometer used for this investigation was donated to the laboratory by Biodex Medical Systems. The authors have no commercial or proprietary interest in this device.     

Performance on the Balance Error Scoring System Decreases After Fatigue

OBJECTIVE: To determine the immediate effects of a whole-body fatigue protocol on performance of the Balance Error Scoring System (BESS), a postural-stability test commonly used as part of a concussion-assessment battery. DESIGN AND SETTING: Subjects were assigned to a fatigue or control group and were assessed before and immediately after a 20-minute fatigue protocol or rest period. SUBJECTS: Fourteen fatigue subjects and 13 control subjects participated in this study. All subjects were male and free of vestibular disorders, and none had suffered a mild head injury or lower extremity injury in the preceding 6 months, as described through self-report. MEASUREMENTS: We measured performance on the BESS for 9 stance-surface conditions and summed each condition to obtain a total score. Using the Borg scale, we also measured ratings of perceived exertion before, during, and after the fatigue protocol or rest period. RESULTS: We found a significant increase in total errors from pretest to posttest in the fatigue group (14.36 +/- 4.73 versus 16.93 +/- 4.32), a significant decrease in errors in the control group (13.32 +/- 3.77 versus 11.08 +/- 3.88), and a significant difference between groups on the posttest. The rating of perceived exertion scores were significantly different between the fatigue and control groups at the middle (13.29 +/- 1.59 versus 6.23 +/- 0.83) and end (15.86 +/- 2.38 versus 6.15 +/- 0.55) of the fatigue or rest period. CONCLUSIONS: The BESS error scores increased immediately after the fatigue protocol, demonstrating that balance ability diminished. Clinicians who use the BESS as part of their sideline assessment for concussion should not administer the test immediately after a concussion due to the effects of fatigue.     

Differential stability and fusion activity of Lyssavirus glycoprotein trimers

The oligomeric structure and the fusion activity of lyssavirus glycoprotein (G) was studied by comparing G from Mokola virus (GMok) and rabies virus (PV strain) (GPV), which are highly divergent lyssaviruses. G expressed at the surface of BSR cells upon either plasmid transfection or virus infection are shown to be mainly trimeric after cross-linking experiments. However, solubilization by a detergent (CHAPS) and analysis in sucrose sedimentation gradient evidenced that GMok trimer is less stable than GPV trimer. A chimeric glycoprotein (G Mok-PV) associating the N-terminal half of GMok to the C-terminal half part of GPV formed trimers with an intermediate stability, indicating that the G C-terminal domain is essential in trimer stability. A cell to cell fusion assay revealed that GMok (and not G Mok-PV) was able to induce fusion at a higher pH (0.5 pH unit) than GPV. Such differences in the oligomeric structure stability and in the fusion activity of lyssavirus glycoproteins may partly account for the previously reported differences of their immunogenic and pathogenic properties.     

Monosomy 9q and trisomy 16q in a case of congenital solitary infantile myofibromatosis

Although infantile myofibromatosis (IM) is the most common fibrous proliferation of infancy, many aspects of this benign lesion have not been explored. IM histogenesis is still poorly understood, despite immunohistochemical staining and ultrastructural features that suggest a myofibroblastic origin. IM diagnosis is often made difficult by the predominance of small primitive spindle cells over myofibrobasts and the presence of intravascular growth. Genetic information is scarce, with only one karyotyped case. Here we describe a case of solitary IM discovered at birth in an otherwise healthy girl. The tumor was well circumscribed, arranged in nodules and made up of ovoid cells without atypia, in a myxoid background. Immunohistochemical evaluation indicated a myofibroblastic differentiation. The cytogenetic and fluorescence in situ hybridization analyses revealed an abnormal chromosome 9, derived from an unbalanced whole-arm translocation between chromosomes 9 and 16. On both chromosomes, the breakpoints were located in the pericentric heterochromatic region. This clonal abnormality has not been reported in other tumors and is different from the chromosome 6q deletion reported in the single previous reported IM karyotype.     

Analysis through mathematical models of the dynamics of the adrenal cortical response to ACTH in the rat

The distribution and metabolism of ACTH and the dynamics of the adrenal cortical response to this tropic hormone were characterized in the rat, through mathematical models involving data derived from experiments, where plasma corticosterone concentrations were measured following both single injections and infusions of ACTH. The models, which incorporate a previously established model of the dynamics of plasma corticosterone, were statistically validated. The simulated dynamics of the different processes linking ACTH secretion by the adenohypophysis to corticosterone secretion by the adrenal cortex include: (1) a variable MCR for plasma ACTH, modeled as the sum of a constant and a saturable degradation process; (2) the ability of the adrenal gland to secrete at a maximal rate aven after the plasma ACTH concentration has become negligible, modeled as the accumulation of an intermediary productZ directly controlled by the plasma ACTH concentration; (3) a saturable secretion with a small time constant and which, for single injections, always starts in the same fashion, modeled as a “synthesis process” whose input is a saturable function ofZ; (4) an immediate fall of the plasma corticosterone concentration at the end of the ACTH infusions, modeled as a “release process” also controlled byZ. Supported by grants from the Medical Research Council of Canada (MT-1205, MT-1555, and MA-4970), and from INSERM, France (CRL-76-5-020-4).     

Triploidy syndrome: A report on two live-born (69, XXY) and one still-born (69, XXX) infants

Two live-born cases, 69,XXY and one stillbirth, 69,XXX are reported. Further evidence is presented to delineate the triploidy syndrome. Common external and internal features which characterize the triploidy syndrome are low-set ears, hypertelorism, colobomata, syndactyly, simian creases, microphallus, undescended testes, scrotal aplasia, anomalous heart and hypoplasia of kidneys and adrenals. The triploidy syndrome encompasses features found in trisomies 13, 18 and 21. We suggest that the abnormal development of the triploidy infants is the result of the mentioned trisomies and their subsequent effect on the remaining genome.