Analysis of Tribological Properties of Powdered Tool Steels M390 and M398 in Contact with Al2O3

The present article examines special steels used for the production of injection screws in the plastic industry, with a glass fiber content of up to 30%. Experimental materials, M390 and M398, are classified as tool steels, which are produced by powder metallurgy-HIP methods (hot isostatic pressing). The main goal of the presented paper is to propose the optimal tempered temperature of M398 steel and also to compare the tribological properties of both materials and to determine the degree of their wear depending on their final heat treatment. Partial results refer to the analysis of hardness, roughness, the overall wear mechanism, the change in the volume of retained austenite due to the tempering temperature, and the EDS analysis of the worn surfaces in individual contact pairs. A ceramic ball Al₂O₃ in the α phase was used as the contact material, which had a diameter of 6.35 mm. The ceramic ball performed a rotational movement on the experimental material surface at an elevated temperature of 200 °C using the dry ball-on-disk method. It was experimentally shown that the new M398 material can fully replace the M390 material because it exhibits significantly better tribological properties. The M398 material showed more than a 400% reduction in wear compared to the M390 material. The ideal heat treatment consisted of cryogenic quenching to −78 °C and a tempering temperature of 400 °C. At tempering temperatures of 200 and 400 °C, adhesive wear occurred, which was combined with abrasive wear at a tempered temperature of 600 °C. The averaged coefficient of friction (COF) results show that the M398 material presents less resistance in the friction process and its values are approximately 0.25, while the M390 material showed a COF value of 0.3 after the cryogenic hardening process. The friction surface roughness of the M398 materials also showed lower values compared to the M390 material by approximately 35%. Both of these results are related to the content of M₇C₃ and MC carbide particles based on Cr and V in the bulk of the material, which are in favor of the M398 material.     

Central European Vaccination Advisory Group (CEVAG) guidance statement on recommendations for 2009 pandemic influenza A(H1N1) vaccination

The 2009 influenza A(H1N1) pandemic is markedly different from seasonal influenza with the disease affecting the younger population and a larger than expected number of severe or fatal cases has been seen in pregnant women, obese people and in people who were otherwise healthy. In Europe, influenza activity caused by the 2009 influenza A(H1N1) virus has passed the winter peak with nearly all countries now reporting lower influenza activity. However, although the rate of 2009 pandemic influenza A(H1N1) is declining, fatal cases continue to be reported and the future is hard to predict. The most effective protection against influenza is vaccination and increasing vaccine coverage is the only way to eliminate uncertainties regarding possible future waves of 2009 pandemic influenza A(H1N1). Recommendations have been developed for several central European countries but there is no clear or uniform definition with respect to priority groups or age groups who should receive vaccination. This paper contains the Central European Vaccination Advisory Group (CEVAG) guidance statement on recommendations for the vaccination of adults and children against 2009 pandemic influenza A(H1N1). CEVAG recommends vaccination of all health-care workers, pregnant women, children ≥6 months and <2 years of age and people with chronic medical conditions as a first priority.     

Relationship between Circulating Tumor Cells,Blood Coagulation,and Urokinase‐Plasminogen‐Activator System in Early Breast Cancer Patients

Cancer is a risk factor for venous thromboembolism (VTE) and plasma d‐dimer (DD) and tissue factor (TF) are established VTE associated markers. Circulating tumor cells (CTCs) are associated with the risk of VTE in metastatic breast cancer. This study aimed to correlate CTCs, blood coagulation and the urokinase plasminogen activator (uPA) system in primary breast cancer (PBC) patients. This prospective study included 116 PBC patients treated by primary surgery. CTCs were detected by quantitative RT‐PCR assay for expression of epithelial (CK19) or epithelial‐mesenchymal transition (EMT) genes (TWIST1, SNAIL1, SLUG, ZEB1, FOXC2). Plasma DD, TF, uPA system proteins were detected by enzyme‐linked immunosorbent assays, while expressions of uPA system in surgical specimens were evaluated by immunohistochemistry. CTCs were detected in 27.6% patients. Patients with CTCs had a significantly higher mean plasma DD (ng/mL) than those of patients without CTCs (632.4 versus 365.4, p = 0.000004). There was no association between plasma TF and CTCs. Epithelial CTCs exhibit higher expression of uPA system genes compared to EMT_CTCs. Patients with CTCs had higher plasma uPA proteins than those of patients without CTCs; there was no correlation between tissue expression of uPA system, CTCs, DD or TF levels. In multivariate analysis CTCs and patients age were independent factors associated with plasma DD. We found association between plasma DD and CTCs indicating a potential role for activation of the coagulation cascade in the early metastatic process. CTCs could be directly involved in coagulation activation or increased CTCs could be marker of aggressive disease and increased VTE risk.     

l‐Arginine Attenuates Cardiac Dysfunction,But Further Down‐Regulates α‐Myosin Heavy Chain Expression in Isoproterenol‐Induced Cardiomyopathy

In view of previously reported increased capacity for nitric oxide production, we suggested that l ‐arginine (ARG), the nitric oxide synthase (NOS) substrate, supplementation would improve cardiac function in isoproterenol (ISO)‐induced heart failure. Male Wistar rats were treated with ISO for 8 days (5 mg/kg/day, i.p.) or vehicle. ARG was given to control (ARG) and ISO‐treated (ISO+ARG) rats in water (0.4 g/kg/day). ISO administration was associated with 40% mortality, ventricular hypertrophy, decreased heart rate, left ventricular dysfunction, fibrosis and ECG signs of ischaemia. RT‐PCR showed increased mRNA levels of cardiac hypertrophy marker atrial natriuretic peptide, but not BNP, decreased expression of myosin heavy chain isoform MYH6 and unaltered expression of pathological MYH7. ISO increased the protein levels of endothelial nitric oxide synthase, but at the same time it markedly up‐regulated mRNA and protein levels of gp91phox, a catalytical subunit of superoxide‐producing NADPH oxidase. Fibrosis was markedly increased by ISO. ARG treatment moderately ameliorated left ventricular dysfunction, but was without effect on cardiac hypertrophy and fibrosis. Combination of ISO and ARG led to a decrease in cav‐1 expression, a further increase in MYH7 expression and a down‐regulation of MYH6 that inversely correlated with gp91phox mRNA levels. Although ARG, at least partially, improved ISO‐impaired basal left ventricular systolic function, it failed to reduce cardiac hypertrophy, fibrosis, oxidative stress and mortality. The protection of contractile performance might be related to increased capacity for nitric oxide production and the up‐regulation of MYH7 which may compensate for the marked down‐regulation of the major MYH6 isoform.     

Crack Propagation Analysis of Compression Loaded Rolling Elements

The problem of crack propagation from internal defects in thermoplastic cylindrical bearing elements is addressed in this paper. The crack propagation in these elements takes place under mixed-mode conditions—i.e., all three possible loading modes (tensile opening mode I and shear opening modes II and III) of the crack are combined together. Moreover, their mutual relation changes during the rotation of the element. The dependency of the stress intensity factors on the crack length was described by general parametric equations. The model was then modified by adding a void to simulate the presence of a manufacturing defect. It was found that the influence of the void on the stress intensity factor values is quite high, but it fades with crack propagating further from the void. The effect of the friction between the crack faces was find negligible on stress intensity factor values. The results presented in this paper can be directly used for the calculation of bearing elements lifetime without complicated finite element simulations.     

Bubble Swelling in Ferritic/Martensitic Steels Exposed to Radiation Environment with High Production Rate of Helium

Reduced-activativon ferritic/martensitic (RAFM) steels are prospective structural materials for fission/fusion nuclear applications because their radiation and swelling resistance outperforms their austenitic counterparts. In radiation environments with a high production rate of helium, such as fusion or spallation applications, these materials suffer from non-negligible swelling due to the inhibited recombination between vacancy and interstitial-type defects. In this work, swelling in helium-implanted Eurofer 97 steel is investigated with a focus on helium production rates in a wide range of helium/dpa ratios. The results show virtually no swelling incubation period preceding a steady-state swelling of about 2 × 10⁻⁴%/He-appm/dpa. A saturation of swelling above 5000 He-appm/dpa was observed and attributed to helium bubbles becoming the dominant sinks for new vacancies and helium atoms. Despite a relatively low irradiation temperature (65 ± 5 °C) and a rather high concentration of helium, transmission electron microscope (TEM) results confirmed a microstructure typical of ferritic/martensitic steels exposed to radiation environments with high production rates of helium.