Implant-Supported Rehabilitation of the Severely Atrophic Maxilla: A Clinical Report

Implant-supported rehabilitation in the posterior maxillary region presents a series of challenges because of the possibility of increased pneumatization of the maxillary sinus after dental loss. In cases where significant maxillary bone resorption has occurred, efforts center on maximizing the use of the remaining bone to afford primary stability to the implants. This clinical report describes a patient with extreme maxillary atrophy for whom fixed rehabilitation supported on 8 implants was accomplished. A zygomatic implant, a pterygomaxillary implant, and 2 implants mesial and distal to both canine eminences were placed. This rehabilitation was accomplished with a less invasive technique and in a much shorter time period compared to a sinus lift procedure. One year after prosthetic loading, the clinical and radiological results remain satisfactory.     

An in vitro evaluation of bond strength of three glass ionomer cements

The purpose of this study was to determine the bond strength of three commercially available glass ionomer cements when used to bond mesh-backed medium twin (0.130 inch) brackets to enamel surface. Three different enamel surface conditions, which included use of pumice, pumice and polyacrylic acid, and pumice followed by acidulated phosphate fluoride, were also tested to determine their effect on the bond strength. In addition, bond strength of one composite resin was compared with those of glass ionomer cements. The teeth were bonded with all the materials according to manufacturers' instructions. Each specimen was embedded in Super-Die with the bonded facial surface exposed. A surveyor was used to align the teeth in the stone uniformly for all specimens. A special bracket holder was used to hold the brackets precisely under the wings during debonding. An Instron universal testing machine was used to measure the force required for bond failure. To stimulate oral conditions, the direction of pull was so designed that it included an element of torsional stress along with tensile force. The findings indicate that a large variation existed between the bond strengths of all materials tested. The bond strength of glass ionomer cements was significantly less than that composite resin. However, the bond strength of at least one glass ionomer cement appears to be adequate for clinical use. The different surface preparation before bonding did not significantly affect the bond strengths of glass ionomer cements. Further investigation is required to test the bond strengths of glass ionomer cements clinically.     

Evaluation of friction between ceramic brackets and orthodontic wires of four alloys

The purpose of this investigation was to determine the frictional resistance offered by ceramic brackets used in combination with wires of different alloys and sizes during in vitro translatory displacement of brackets. Findings with ceramic brackets were also compared with outcomes of treatment with stainless steel brackets. Stainless steel, cobalt-chromium, beta-titanium, and nickel-titanium wires of different cross-sectional sizes were tested in medium-twin monocrystalline ceramic brackets with both 0.018-inch and 0.022-inch slot sizes. The wires were ligated into the brackets with elastomeric modules. Brackets were moved along the wire by means of an Instron universal testing machine, and frictional force was measured by a compression cell and recorded graphically on an xy recorder. Wire friction in the ceramic brackets increased as wire size increased, and rectangular wires produced greater friction than round wires. Beta-titanium and nickel-titanium wires were associated with higher frictional forces than stainless steel or cobalt-chromium wires. These findings follow the same general trends as those found with stainless steel brackets; however, wires in ceramic brackets generated significantly stronger frictional force than did wires in stainless steel brackets.     

Dentofacial features of a family with Crouzon syndrome. Case reports

Crouzon syndrome is an autosomal dominant condition characterized by craniosynostosis with associated dentofacial anomalies. This paper describes the variable clinical features in affected individuals over two generations of a family with particular reference to the dentofacial deformities and discussion of management strategies.     

Effect of varying the force direction on maxillary orthopedic protraction

The aim of this study was to examine the effect of varying the force direction on maxillary protraction. A total of 20 patients with class III maxillary retrognathism were randomly divided into two groups. Group 1 was comprised of nine patients with a mean age of 8.58 years, and group 2 was composed of 11 patients with a mean age of 8.51 years. Both groups received a cap splint-type rapid palatal expander and the screw was activated twice a day for 10 days. After the expansion procedure the face mask protraction procedure was initiated. In group 1, we applied the force intraorally from the canine region with a forward and downward direction at a 30 degrees angle to the occlusal plane. In group 2, the force was applied extraorally 20 mm above the maxillary occlusal plane. In both groups a unilateral 500 g force was applied and the patients were instructed to wear the face mask for 16 h/d for the first three months and 12 h/d for the next three months. The Wilcoxon sign rank test was used to evaluate the effect of the two different face masks, and a Mann-Whitney U-test was carried out to evaluate the differences between the two groups. The results showed that both force systems were equally effective to protract the maxilla; however, in group I we observed that the maxilla advanced forward with a counter-clockwise rotation. In group 2 we observed an anterior translation of maxilla without rotation. The dental effects of both methods were also different. The maxillary occlusal plane did not rotate in group 1, in contrast to the clockwise rotation in group 2. The maxillary incisors were proclined slightly in group 1, but in contrast they were retroclined and extruded in group 2. In conclusion, the force application from near the center of resistance of the maxilla was an effective method to prevent the unwanted side effects, such as counter-clockwise rotation of the maxilla, in group 1. The group 2 results suggest that this method can be used effectively on patients who present as class III combined with an anterior open bite.     

Primarily Research

Abstract: Composite materials have become an integral part of the wide range of filling materials currently available. Conditioning is necessary to achieve adequate bonding of the composite material to enamel and dentin. Normally, this is done by applying acid preparations to the dental surfaces. These acids have an etching effect that causes surface roughening. The increasing application of lasers in dentistry has introduced another possibility. Laser irradiation can cause roughening of enamel and dentin surfaces. Another interesting alternative is the so-called kinetic cavity preparation technique. This method also results in distinct surface roughening. The purpose of the present study, was to compare the described methods. Tensile bond strength tests and shear bond tests were carried out to examine the adhesion of a composite material to surfaces treated with these methods. Laser irradiation with certain devices and the air-abrasive technique yielded results similar to those with acid etching.     

Temporalis myofascial flap in maxillofacial reconstruction: clinical and histological studies of the oral healing process

Objectives—To report our experience with temporalis myofascial flaps (TMF), describe the healing process of uncovered flaps in the mouth, and the histology of the repaired mucosa in the long term. Design—Prospective clinical and histological study. Subjects—36 patients who received a TMF over a 6.5 year period for serial assessment of the oral healing, 24 patients whose scars over the reconstructed area were assessed clinically, and 11 whose repaired mucosa was assessed histologically. Main outcome measures—To follow the clinical process of oral healing of the TMF and describe the repaired mucosa healed over the flap. Results—The uncovered TMF in the mouth healed gradually starting with an acute inflammatory phase, going through chronic inflammatory and proliferative phases with eventual epithelialisation of the oral mucosa. There were no major complications. The healed mucosa showed mild scarring in 70% of cases and the repaired mucosa had characteristic histological features that were distinct from the normal mucosa. Conclusion—The TMF is an extremely reliable and versatile flap for maxillofacial reconstruction which heals gradually with eventual coverage by mildly scarred repaired mucosa.     

Effect of orthodontic forces on blood flow in human gingiva.

The relationship of gingival blood flow to the magnitude and duration of applied force was studied in humans using Laser Doppler flowmetry. The sample consisted of five adult volunteers with interdental space between their maxillary central incisors. The labial surface of each central incisor was bonded with a buccal tube and a spring force was applied to close the space. The forces applied were 50 g, 80 g, 120 g, and 250 g. Each force was applied for 30 seconds, 60 seconds, 90 seconds, 5 minutes, and 10 minutes. The blood flow signals were recorded continuously using a pen recorder. Measurements indicated that blood flow was negatively correlated to the amount of force applied. The duration of reactive hyperemia was positively correlated to the duration of force. Laser Doppler flowmetry measures blood flow in superficial periodontal tissues. Yet, the relationship of blood flow changes to the magnitude and duration of orthodontic force suggests that measurements of gingival blood flow may provide a means of estimating physiologic orthodontic forces.     

Anticipating the Future and Change

As in all of medicine, there are basic assumptions underlying the present system of dental education and delivery. These basic assumptions are facing challenges due in part to the marked reduction in the incidence of caries and the development of more effective therapies. This current period of time is described as an era of true change, rather than the mere modification of existing technology. Changes are going to occur in a number of areas. The move will be from government to private, from small to large, from generalist to specialist. Since change is inevitable, one can learn about and prepare for the stress of change, the changes happening now, and how to adapt to change. Although many changes are beyond the individual's control, their occurrence may be beneficial.     

Professional prophylaxis and its effect on the periodontium of full-banded orthodontic patients

The effect of professional prophylaxis on the periodontium was studied in 14 adolescent orthodontic patients while under active treatment using a split-mouth experimental design. A full-banded appliance was used on all of the patients. The following variables were examined: plaque registration, gingival index, gingival migration, and width of the attached gingiva. Professional rubber-cup prophylaxis was performed on the test side of all patients together with reinforced oral hygiene instruction on a monthly basis. Measurements for the plaque registration, gingival index, gingival migration, and the width of the attached gingiva were recorded at the initial visit (baseline records), the 6-month evaluation, and the 10-month evaluation. Monthly registrations were completed for the plaque deposits and gingival inflammation at each of the 11 visits. All measurements were taken at the midfacial surface of the selected teeth. Four conclusions can be drawn from the findings of this study: the presence of an orthodontic appliance did not result in an increase of plaque accumulation or gingival inflammation for the full-banded orthodontic patient; monthly oral hygiene instruction was effective in significantly reducing the amount of visible plaque and gingival inflammation; monthly rubber-cup prophylaxis had a significant effect in reducing the gingival enlargement routinely associated with a fixed orthodontic appliance; and the width of attached gingiva showed no significant change throughout the course of the study.