Scoring technique for diagnosis of ventricular hypertrophy from three orthogonal lead electrocardiogram.

A prospective study for the development of scoring techniques for the diagnosis of ventricular hypertrophy from the three orthogonal lead electrocardiogram was undertaken. A total of 51 hearts was examined at necropsy in a training group on which the scoring techniques were developed and a test group of a further 82 hearts was studied to assess the sensitivity and specificity of the method. The hearts were classified as being normal or having left ventricular hypertrophy, right ventricular hypertrophy, biventricular hypertrophy, or were placed in a borderline category. These classifications were based on the measurement of the weight of the left ventricular free wall, the interventricular septum, and the right ventricular free wall. Classical electrocardiographic variables were selected and assigned a point score on the basis of their diagnostic value. The electrocardiographic diagnosis of left ventricular hypertrophy, right ventricular hypertrophy, and biventricular hypertrophy was then made when the relevant score exceeded four points. After excluding 25 cases which showed conduction defects or were regarded as borderline at necropsy, 57 cases remained in the test group for assessing the technique. The sensitivity and specificity for left ventricular hypertrophy were 65 per cent and 91 per cent, respectively. For right ventricular hypertrophy corresponding results were 53 and 90 per cent. For biventricular hypertrophy the sensitivity was lower at 42 per cent, with a corresponding specificity of 93 per cent. These results represent a considerable improvement over older techniques, with up to a tenfold increase in sensitivity being obtained. The technique can be applied with or without computer assistance.     

A counterpoint paper: Comments on the electrocardiographic part of the 2018 Fourth Universal Definition of Myocardial Infarction endorsed by the International Society of Electrocardiology and the International Society for Holter and Noninvasive Electrocardiology

The Fourth Universal Definition of Myocardial Infarction (FUDMI) focuses on the distinction between nonischemic myocardial injury and myocardial infarction (MI), along with the role of cardiovascular magnetic resonance, in order to define the etiology of myocardial injury. As a consequence, there is less emphasis on updating the parts of the definition concerning the electrocardiographic (ECG) changes related to MI. Evidence of myocardial ischemia is a prerequisite for the diagnosis of MI, and the ECG is the main available tool for (a) detecting acute ischemia, (b) triage, and (c) risk stratification upon presentation. This review focuses on multiple aspects of ECG interpretation that we firmly believe should be considered for incorporation in any future update to the Universal Definition of MI.     

Loss of Miro1-directed mitochondrial movement results in a novel murine model for neuron disease

Defective mitochondrial distribution in neurons is proposed to cause ATP depletion and calcium-buffering deficiencies that compromise cell function. However, it is unclear whether aberrant mitochondrial motility and distribution alone are sufficient to cause neurological disease. Calcium-binding mitochondrial Rho (Miro) GTPases attach mitochondria to motor proteins for anterograde and retrograde transport in neurons. Using two new KO mouse models, we demonstrate that Miro1 is essential for development of cranial motor nuclei required for respiratory control and maintenance of upper motor neurons required for ambulation. Neuron-specific loss of Miro1 causes depletion of mitochondria from corticospinal tract axons and progressive neurological deficits mirroring human upper motor neuron disease. Although Miro1-deficient neurons exhibit defects in retrograde axonal mitochondrial transport, mitochondrial respiratory function continues. Moreover, Miro1 is not essential for calcium-mediated inhibition of mitochondrial movement or mitochondrial calcium buffering. Our findings indicate that defects in mitochondrial motility and distribution are sufficient to cause neurological disease.Motor neuron diseases (MNDs), including ALS and spastic paraplegia (SP), are characterized by the progressive, length-dependent degeneration of motor neurons, leading to muscle atrophy, paralysis, and, in some cases, premature death. There are both inherited and sporadic forms of MNDs, which can affect upper motor neurons, lower motor neurons, or both. Although the molecular and cellular causes of most MNDs are unknown, many are associated with defects in axonal transport of cellular components required for neuron function and maintenance (1–6).A subset of MNDs is associated with impaired mitochondrial respiration and mitochondrial distribution. This observation has led to the hypothesis that neurodegeneration results from defects in mitochondrial motility and distribution, which, in turn, cause subcellular ATP depletion and interfere with mitochondrial calcium ([Ca²⁺]_m) buffering at sites of high synaptic activity (reviewed in ref. 7). It is not known, however, whether mitochondrial motility defects are a primary cause or a secondary consequence of MND progression. In addition, it has been difficult to isolate the primary effect of mitochondrial motility defects in MNDs because most mutations that impair mitochondrial motility in neurons also affect transport of other organelles and vesicles (1, 8–11).In mammals, the movement of neuronal mitochondria between the cell body and the synapse is controlled by adaptors called trafficking kinesin proteins (Trak1 and Trak2) and molecular motors (kinesin heavy chain and dynein), which transport the organelle in the anterograde or retrograde direction along axonal microtubule tracks (7, 12–24). Mitochondrial Rho (Miro) GTPase proteins are critical for transport because they are the only known surface receptors that attach mitochondria to these adaptors and motors (12–15, 18, 25, 26). Miro proteins are tail-anchored in the outer mitochondrial membrane with two GTPase domains and two predicted calcium-binding embryonic fibroblast (EF) hand motifs facing the cytoplasm (12, 13, 25, 27, 28). A recent Miro structure revealed two additional EF hands that were not predicted from the primary sequence (29). Studies in cultured cells suggest that Miro proteins also function as calcium sensors (via their EF hands) to regulate kinesin-mediated mitochondrial “stopping” in axons (15, 16, 26). Miro-mediated movement appears to be inhibited when cytoplasmic calcium is elevated in active synapses, effectively recruiting mitochondria to regions where calcium buffering and energy are needed. Despite this progress, the physiological relevance of these findings has not yet been tested in a mammalian animal model. In addition, mammals ubiquitously express two Miro orthologs, Miro1 and Miro2, which are 60% identical (12, 13). However, the individual roles of Miro1 and Miro2 in neuronal development, maintenance, and survival have no been evaluated.We describe two new mouse models that establish the importance of Miro1-mediated mitochondrial motility and distribution in mammalian neuronal function and maintenance. We show that Miro1 is essential for development/maintenance of specific cranial neurons, function of postmitotic motor neurons, and retrograde mitochondrial motility in axons. Loss of Miro1-directed retrograde mitochondrial transport is sufficient to cause MND phenotypes in mice without abrogating mitochondrial respiratory function. Furthermore, Miro1 is not essential for calcium-mediated inhibition of mitochondrial movement or [Ca²⁺]_m buffering. These findings have an impact on current models for Miro1 function and introduce a specific and rapidly progressing mouse model for MND.     

Importance of the DNA “bond” in programmable nanoparticle crystallization

If a solution of DNA-coated nanoparticles is allowed to crystallize, the thermodynamic structure can be predicted by a set of structural design rules analogous to Pauling’s rules for ionic crystallization. The details of the crystallization process, however, have proved more difficult to characterize as they depend on a complex interplay of many factors. Here, we report that this crystallization process is dictated by the individual DNA bonds and that the effect of changing structural or environmental conditions can be understood by considering the effect of these parameters on free oligonucleotides. Specifically, we observed the reorganization of nanoparticle superlattices using time-resolved synchrotron small-angle X-ray scattering in systems with different DNA sequences, salt concentrations, and densities of DNA linkers on the surface of the nanoparticles. The agreement between bulk crystallization and the behavior of free oligonucleotides may bear important consequences for constructing novel classes of crystals and incorporating new interparticle bonds in a rational manner.Materials scientists have accomplished much by studying the way atoms and molecules crystallize. In these systems, however, the identity of the atom and its bonding behavior cannot be independently controlled, limiting our ability to tune material properties at will. In contrast, when a nanoparticle is modified with a dense shell of upright, oriented DNA, it can behave as a programmable atom equivalent (PAE) (1, 2) that can be used to synthesize diverse crystal structures with independent control over composition, scale, and lattice symmetry (3–14). The thermodynamic product of this crystallization process has been extensively studied by both experimental and theoretical means, and thus a series of design rules has been proposed and validated with a simple geometric model known as the complementary contact model (CCM). These rules allow one to predict the thermodynamically favored structure as the arrangement of particles that maximizes complementary contacts and therefore DNA hybridization (2, 6). These efforts have been very successful in predicting the thermodynamically favored product; recent studies have even demonstrated that PAEs can form single-crystal Wulff polyhedra that are analogous to those formed in atomic systems with the same crystallographic symmetry (15). However, the fact that there is a crystalline thermodynamic product does not mean that any choice of DNA and nanoparticles will result in crystalline systems in practice (3, 4). For example, crystallization has been observed for a relatively narrow class of PAEs (16) and in a manner that is primarily dependent upon the length of the DNA linker and temperature at which assembly occurs (8). Thus, absent from our understanding of these systems is a connection between the crystallization process and the properties of the DNA bonds that form the foundation of these structures.Here, we study the crystallization process and find that the complexity of the polyvalent DNA interactions can be simply understood by considering the behavior of a single DNA bond. By systematically studying the roles of nucleobase sequence, solution ionic strength, DNA density, and temperature on crystallization, we find that the effects of these factors are mirrored by the rates of hybridization and dehybridization of free DNA. In addition to examining steady-state structures, we evaluate the formation and reorganization of these crystals in a time-resolved manner using small-angle X-ray scattering (SAXS) to study how crystallization dynamics are affected by each design variable. Finally, we develop a predictive model that allows one to compare the range of temperatures over which crystallization will occur for different conditions. In addition to providing an avenue for improving PAE crystallization and realizing new architectures, the effectiveness of this reductionist model suggests that this approach can be applied to study crystallization in a broader class of systems, thus making an impact in the materials by design community.     

Does switching anti-TNFα biologic agents represent an effective option in childhood chronic uveitis: The evidence from a systematic review and meta-analysis approach

Objective

To summarize the evidence regarding the effectiveness of switching to a second anti-TNFα treatment in children with autoimmune chronic uveitis (ACU), refractory to the first course of anti-TNFα treatment.

Methods

We conducted a systematic literature review between January 2000 and May 2013 to investigate the efficacy of a second anti-TNFα agent in the treatment of ACU in children (≤16 years) refractory to a first course of a single anti-TNFα treatment, topical and/or systemic steroid therapy and at least one DMARD. The primary outcome measure was the improvement of intraocular inflammation, as defined by the SUN working group criteria, at 6 (±2) months of treatment.

Results

Among 1086 identified articles, 128 were scrutinized: 10 observational studies, 6 on adalimumab (ADA), 3 on infliximab (INF), and 1 on both, were deemed eligible. Study cohort included 40 children (ADA = 34 and INF = 6), median age 8 years (range 3–16). Nine were males, 28 females (gender not reported in 3), 39/40 were affected by JIA. Seventeen children received etanercept: 11 were switched to ADA, the remaining 6 to INF. All 23 children who previously received INF were switched to ADA. Altogether, 30 children (24 on ADA, 6 on INF) of 40 responded to treatment: 0.75 (95% CI: 0.51–100) was the combined estimate of the proportion of subjects improving.

Conclusions

Despite the fact that no RCT is available and the number of cases is small, this review provides evidence that switching to a second anti-TNFα agent results in improvement of ocular activity for the 75% treated children     

Diagnosis of myocardial infarction following hospitalisation for exacerbation of COPD

Cardiovascular disease is common in chronic obstructive pulmonary disease (COPD) and raised troponin is common in exacerbations. However, the prevalence of myocardial infarction following hospitalisation for exacerbation of COPD is unknown. Patients aged ≥ 40 yrs hospitalised with acute exacerbation of COPD (n = 242) with ≥ 10 pack-yrs of cigarette smoking were included in a prospective case series conducted in four hospitals. Patients whose primary presenting complaint was chest pain or who had an alternative diagnosis were excluded. Chest pain histories, serial ECGs and troponin levels were obtained. The mean ± SD age was 69 ± 9 yrs; 108 (45%) patients were male and almost half were current smokers. 124 (51%; 95% CI 48-58%) patients had chest pain, which was exertional in 62 (26%). 24 (10%) had raised troponin, among whom, 20 (8.3%; 95% CI 5.1-12.5%) had chest pain and/or serial ECG changes, fulfilling the 2007 Universal Definition of Myocardial Infarction. Neither chest pain (p = 0.77) nor serial ECG changes (p = 0.39) were associated with raised troponin. Raised troponin, chest pain and serial ECG changes are common in patients admitted to hospital with exacerbation of COPD. Overall, one in 12 patients met the criteria for myocardial infarction. Whether these patients would benefit from further cardiac investigation is unknown.     

Bonded versus banded first molar attachments: a randomized controlled clinical trial

OBJECTIVE: To compare the clinical failure rates of bonded first molar tubes with those of cemented bands during fixed appliance therapy. DESIGN: Prospective randomized controlled clinical trial. SETTING: Two UK hospital orthodontic clinics, February 2001-December 2004. PARTICIPANTS: Hospital waiting list patients needing fixed appliances (n = 110). METHOD: Patients were randomly allocated to two groups. Experimental group patients (n = 55) received single first molar tubes (n = 181) bonded with a no-mix chemically cured composite (Rely-A-Bond) after a 30-second etch. Control group patients (n = 55) were treated with bands (n = 186) cemented with Intact glass ionomer cement (GIC). First-time failures were recorded together with the time of failure. All patients were followed to the end or discontinuation of treatment. RESULTS: First-time failures: bands = 18.8%; bonds = 33.7 %. Bonded tubes were more likely to fail [RR 2.4; 95% CI (1.4, 4.1)] compared with bands. Experimental group patients also had more bracket failures (P = 0.009), when analysed at patient level. CONCLUSION: First molar tubes bonded with Rely-A-Bond composite showed a significantly higher first-time failure rate than bands cemented with Intact GIC.