Mixed Reality Combined with Three‐Dimensional Printing Technology in Total Hip Arthroplasty: An Updated Review with a Preliminary Case Presentation

Three‐dimensional (3D) printing technology, virtual reality, and augmented reality technology have been used to help surgeons to complete complex total hip arthroplasty, while their respective shortcomings limit their further application. With the development of technology, mixed reality (MR) technology has been applied to improve the success rate of complicated hip arthroplasty because of its unique advantages. We presented a case of a 59‐year‐old man with an intertrochanteric fracture in the left femur, who had received a prior left hip fusion. After admission to our hospital, a left total hip arthroplasty was performed on the patient using a combination of MR technology and 3D printing technology. Before surgery, 3D reconstruction of a certain bony landmark exposed in the surgical area was first performed. Then a veneer part was designed according to the bony landmark and connected to a reference registration landmark outside the body through a connecting rod. After that, the series of parts were made into a holistic reference registration instrument using 3D printing technology, and the patient's data for bone and surrounding tissue, along with digital 3D information of the reference registration instrument, were imported into the head‐mounted display (HMD). During the operation, the disinfected reference registration instrument was installed on the selected bony landmark, and then the automatic real‐time registration was realized by HMD through recognizing the registration landmark on the reference registration instrument, whereby the patient's virtual bone and other anatomical structures were quickly and accurately superimposed on the real body of the patient. To the best of our knowledge, this is the first report to use MR combined with 3D printing technology in total hip arthroplasty.     

顶天立地服务需求 注重内涵创建一流——首都医科大学建校60周年教育教学与人才培养成果回顾

首都医科大学通过60年辛勤耕耘、精益求精，秉承“顶天立地”的人才培养理念，为社会培养了大批高水平的学术型与应用型医药卫生人才。回顾学校60年来本专科教育、全科医学教育、国际教育、研究生教育的人才培养成果，以总结经验并鼓舞全体首医人进一步求真务实、凝心聚力、积极进取、追求卓越，努力将学校建设成为国际一流的研究型医科大学。     

门诊和病房电脑鼠标细菌污染情况调查

目的调查门诊和普通病房电脑鼠标不同时段的细菌污染情况。方法随机抽取某院门诊及普通病房的各16个电脑鼠标，分别于8∶00、10∶30、13∶00、15∶30进行采样，样本接种培养后对菌落计数并筛查多重耐药菌。结果32个鼠标共计采样128次，最高菌落数达121 CFU/cm2，平均菌落数为23.9 CFU/cm2。随着时间的推移，同一鼠标的细菌计数逐渐增多。不同时段门诊和病房的电脑鼠标菌落数比较，在10∶30、13∶00、15∶30三个时间点，病房鼠标的菌落数均高于门诊（均P≤0.05）。64个病房电脑鼠标标本中检出耐甲氧西林金黄色葡萄球菌（MRSA）和耐碳青霉烯类鲍曼不动杆菌（CRAB）各1株。结论加强鼠标日常清洁消毒及监测工作非常重要，应增加清洁消毒频率或更换长效消毒剂，加强病房环境的清洁消毒。     

社区“5+1”糖尿病分阶段达标管理对2型糖尿病患者生存质量干预效果分析

目的 分析社区"5+1"糖尿病分阶段达标管理对2型糖尿病患者生存质量的干预效果及其影响因素，为提高患者生存质量提供依据。方法 采用分层整群抽样的方法在山西省、江苏省和宁夏回族自治区选择12个社区卫生服务中心，分别作为干预组（管理方式：社区"5+1"糖尿病分阶段达标管理）、对照组[管理方式：依据《国家基本公共卫生服务规范（2011年版）》的相关要求]，进行为期2年的随访观察。采用面对面问卷调查的方式，收集患者的人口学信息等基本信息；采用健康调查简表（SF-36）对患者在干预前后测量生存质量。采用SAS 9.4软件进行双重差分法以及多重线性回归模型分析。结果 基线时共纳入2 467名研究对象，终末时共1 924人接受了为期2年完整的随访管理。干预后，干预组、对照组患者生理健康维度（PCS）、心理健康维度（MCS）评分变化净差值分别为13.6分、29.8分。多重线性回归分析结果显示，影响患者PCS得分的主要因素有年龄、医保类型、基线PCS得分以及所在地区，影响患者MCS得分的主要因素有年龄、医保类型、基线MCS得分、是否合并高血压以及所在地区。结论 社区"5+1"糖尿病分阶段达标管理对2型糖尿病患者生存质量的干预效果较好。     

In Vivo Kinematics of Functional Ankle Instability Patients and Lateral Ankle Sprain Copers During Stair Descent

Patients with mechanic ankle instability experience increased tibiotalar and subtalar joint laxity. However, in vivo joint kinematics in functional ankle instability (FAI) patients and lateral ankle sprain (LAS) copers, especially during dynamic activities, are poorly understood. Ten FAI patients, 10 LAS copers, and 10 healthy controls were included in this study. A dual fluoroscopic imaging system was used to analyze the tibiotalar and subtalar joint kinematics during stair descent. Five key poses of stair descent were analyzed. Kinematic data from six degrees of freedom were calculated utilizing a solid modeling software. The range of motion and joint positions in each degree of freedom were compared among the three groups. The tibiotalar joints of FAI patients and LAS copers were significantly more inverted than those of healthy controls during the foot strike (p = 0.016, = 0.264). The subtalar joints of FAI patients were significantly more anteriorly translated (pose 2, p = 0.003, = 0.352; pose 3, p < 0.001, = 0.454; pose 4, p = 0.004, = 0.334), inverted (pose 4, p = 0.027, = 0.234; pose 5,p = 0.034, = 0.221), and externally rotated (pose 4, p = 0.037, = 0.217; pose 5; p = 0.004, = 0.331) than those of healthy controls during the mid‐stance and the heel off. The FAI patients showed excessive tibiotalar inversion and subtalar joint hypermobility during stair descent. Meanwhile, the LAS copers maintained subtalar joint stability, and only showed excessive tibiotalar inversion in foot strike. These data provide insight into the mechanisms behind the development of FAI after initial LAS. © 2019 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 37:1860–1867, 2019