Randomised controlled trial of zinc supplementation in malnourished Bangladeshi children with acute diarrhoea

OBJECTIVE: To evaluate the impact of zinc supplementation on the clinical course, stool weight, duration of diarrhoea, changes in serum zinc, and body weight gain of children with acute diarrhoea. DESIGN: Randomised double blind controlled trial. Children were assigned to receive zinc (20 mg elemental zinc per day) containing multivitamins or control group (zinc-free multivitamins) daily in three divided doses for two weeks. SETTING: A diarrhoeal disease hospital in Dhaka, Bangladesh. PATIENTS: 111 children, 3 to 24 months old, below 76% median weight for age of the National Center for Health Statistics standard with acute diarrhoea. Children with severe infection and/or oedema were excluded. MAIN OUTCOME MEASURES: Total diarrhoeal stool output, duration of diarrhoea, rate of weight gain, and changes in serum zinc levels after supplementation. RESULTS: Stool output was 28% less and duration 14% shorter in the zinc supplemented group than placebo (p = 0.06). There were reductions in median total diarrhoeal stool output among zinc supplemented subjects who were shorter (less than 95% height for age), 239 v 326 g/kg (p < 0.04), and who had a lower initial serum zinc (< 14 mmol/l), 279 v 329 g/kg (p < 0.05); a shortening of mean time to recovery occurred (4.7 v 6.2 days, p < 0.04) in those with lower serum zinc. There was an increase in mean serum zinc in the zinc supplemented group (+2.4 v -0.3 mumol/l, p < 0.001) during two weeks of supplementation, and better mean weight gain (120 v 30 g, p < 0.03) at the time of discharge from hospital. CONCLUSIONS: Zinc supplementation is a simple, acceptable, and affordable strategy which should be considered in the management of acute diarrhoea and in prevention of growth faltering in children specially those who are malnourished.     

Longitudinal neurological follow-up of a group of HIV-seropositive and HIV-seronegative hemophiliacs: results from the hemophilia growth and development study

BACKGROUND: Boys and young men with hemophilia treated with factor infusions before 1985 had a substantial risk of acquiring the human immunodeficiency virus (HIV) and the acquired immunodeficiency syndrome. This study was designed to assess the effects of HIV and hemophilia per se on neurological function in a large cohort of subjects with hemophilia, and to investigate the relationships between neurological disease and death during follow-up. METHODS: Three hundred thirty-three boys and young men (207 HIV seropositive and 126 HIV seronegative) were evaluated longitudinally in a multicenter, multidisciplinary study. Neurological history and examination were conducted at baseline and annually for 4 years. The relationship between neurological variables, HIV serostatus, CD4+ cell counts, and vital status at the conclusion of the study was examined using logistic regression models. RESULTS: The risks of nonhemophilia-associated muscle atrophy, behavior change, and gait disturbance increased with time in immune compromised HIV-seropositive subjects compared with HIV seronegative or immunologically stable HIV-seropositive subjects. The risk of behavior change in immune compromised HIV-seropositive hemophiliacs, for example, rose to 60% by year 4 versus 10% to 17% for the other study groups. Forty-five subjects (13.5%), all of whom were HIV seropositive, died by year 4. Subjects who died had had increased risks of hyperreflexia, nonhemophilia-associated muscle atrophy, and behavior change. CONCLUSIONS: These results indicate that immune compromised, HIV-seropositive hemophiliacs have high rates of neurological abnormalities over time and that neurological abnormalities were common among subjects who later died. By contrast, immunologically stable HIV-seropositive subjects did not differ from the HIV-seronegative participants. Hemophilia per se was associated with progressive abnormalities of gait, coordination, and motor function.     

Vascular endothelial growth factor gene polymorphisms and risk of primary lung cancer.

Angiogenesis is an essential process in the development, growth, and metastasis of malignant tumors including lung cancer. DNA sequence variations in the vascular endothelial growth factor (VEGF) gene may lead to altered VEGF production and/or activity, thereby causing interindividual differences in the susceptibility to lung cancer via their actions on the pathways of tumor angiogenesis. To test this hypothesis, we investigated the potential association between three VEGF polymorphisms (-460T > C, +405C > G, and 936C > T)/haplotypes and the risk of lung cancer in a Korean population. VEGF genotypes were determined in 432 lung cancer patients and 432 healthy controls that were frequency matched for age and sex. VEGF haplotypes were predicted using Bayesian algorithm in the phase program. Compared with the combined +405 CC and CG genotype, the +405 GG genotype found associated with a significantly decreased risk of small cell carcinoma [SCC; adjusted odds ratio (OR), 0.36; 95% confidence interval (95% CI), 0.17-0.78]. The 936 CT genotype and the combined 936 CT and TT genotype were also associated with a significantly decreased risk of SCC compared with the 936 CC genotype (adjusted OR, 0.47; 95% CI, 0.26-0.85 and adjusted OR, 0.44; 95% CI, 0.24-0.80, respectively). Haplotype CGT was associated with a significantly decreased risk of SCC (adjusted OR, 0.39; 95% CI, 0.18-0.87), whereas haplotype TCC conferred a significantly increased risk of SCC (adjusted OR, 1.63; 95% CI, 1.14-2.33). None of the VEGF polymorphisms studied significantly influenced the susceptibility to lung cancer except SCC. However, haplotypes TCT and TGT were significantly associated with the risk of overall lung cancer, respectively (adjusted OR, 0.38; 95% CI, 0.25-0.60 and adjusted OR, 3.94; 95% CI, 2.00-7.76, respectively). These effects of haplotypes TCT and TGT on lung cancer risk were observed in three major histologic types of lung cancer. These results suggest that the VEGF gene may be contribute to an inherited predisposition to lung cancer.     

Circulating serum xenoestrogens and mammographic breast density

Introduction

Humans are widely exposed to estrogenically active phthalates, parabens, and phenols, raising concerns about potential effects on breast tissue and breast cancer risk. We sought to determine the association of circulating serum levels of these chemicals (reflecting recent exposure) with mammographic breast density (a marker of breast cancer risk).

Methods

We recruited postmenopausal women aged 55 to 70 years from mammography clinics in Madison, Wisconsin (N = 264). Subjects completed a questionnaire and provided a blood sample that was analyzed for mono-ethyl phthalate, mono-butyl phthalate, mono-benzyl phthalate, butyl paraben, propyl paraben, octylphenol, nonylphenol, and bisphenol A (BPA). Percentage breast density was measured from mammograms by using a computer-assisted thresholding method.

Results

Serum BPA was positively associated with mammographic breast density after adjusting for age, body mass index, and other potentially confounding factors. Mean percentage density was 12.6% (95% confidence interval (CI), 11.4 to 14.0) among the 193 women with nondetectable BPA levels, 13.7% (95% CI, 10.7 to 17.1) among the 35 women with detectable levels below the median (<0.55 ng/ml), and 17.6% (95% CI, 14.1 to 21.5) among the 34 women with detectable levels above the median (>0.55 ng/ml; P_trend = 0.01). Percentage breast density was also elevated (18.2%; 95% CI, 13.4 to 23.7) among the 18 women with serum mono-ethyl phthalate above the median detected level (>3.77 ng/ml) compared with women with nondetectable BPA levels (13.1%; 95% CI, 11.9 to 14.3; P_trend = 0.07). No other chemicals demonstrated associations with percentage breast density.

Conclusions

Postmenopausal women with high serum levels of BPA and mono-ethyl phthalate had elevated breast density. Further investigation of the impact of BPA and mono-ethyl phthalate on breast cancer risk by using repeated serum measurements or other markers of xenoestrogen exposure are needed.     

Fabrication of Large-Area Mullite–Cordierite Composite Substrates for Semiconductor Probe Cards and Enhancement of Their Reliability

This work aims to fabricate a large-area ceramic substrate for the application of probe cards. Mullite (M) and cordierite (C), which both have a low thermal expansion coefficient, excellent resistance to thermal shock, and high durability, were selected as starting powders. The mullite–cordierite composites were produced through different composition ratios of starting powders (M:C = 100:0, M:C = 90:10, M:C = 70:30, M:C = 50:50, M:C = 30:70, and M:C = 0:100). The effects of composition ratio and sintering temperature on the density, porosity, thermal expansion coefficient, and flexural strength of the mullite–cordierite composite pellets were investigated. The results showed that the mullite–cordierite composite pellet containing 70 wt% mullite and 30 wt% cordierite sintered at 1350 °C performed exceptionally well. Based on these findings, a large-area mullite–cordierite composite substrate with a diameter of 320 mm for use in semiconductor probe cards was successfully fabricated. Additionally, the changes in sheet resistance and flexural strength were measured to determine the effect of the environmental tests on the large-area substrate such as damp heat and thermal shock. The results indicated that the mullite–cordierite composite substrate was extremely reliable and durable.     

Dual-Scale Porosity Alumina Structures Using Ceramic/Camphene Suspensions Containing Polymer Microspheres

This study demonstrates the utility of thermo-regulated phase separable alumina/camphene suspensions containing poly(methyl methacrylate) (PMMA) microspheres as porogens for the production of multi-scale porosity structures. The homogeneous suspension prepared at 60 °C could undergo phase separation during freezing at room temperature. This process resulted in the 3D networks of camphene crystals and alumina walls containing PMMA microspheres. As a consequence, relatively large dendritic pores with several tens of microns size could be created as the replica of frozen camphene crystals. In addition, after the removal of PMMA microspheres via heat-treatment, micron-sized small spherical pores could be generated in alumina walls. As the PMMA content with respect to the alumina content increased from 0 vol% to 40 vol%, while the camphene content in the suspensions was kept constant (70 vol%), the overall porosity increased from 45.7 ± 0.5 vol% to 71.4 ± 0.5 vol%. This increase in porosity is attributed to an increase in the fraction of spherical pores in the alumina walls. Thus, compressive strength decreased from 153 ± 18.3 MPa to 33 ± 7.2 MPa. In addition, multi-scale porosity alumina objects with a honeycomb structure comprising periodic hexagonal macrochannels surrounded by dual-scale porosity walls were constructed using a 3D plotting technique.     

Three-Point Bending Properties of Hybrid Multi-Materials Using Adhesive Bonding Dependent on Strength Difference between Steel and Aluminum

The mechanical behaviors of two multi-materials, DP590 (steel sheet)–A356 (cast aluminum alloy) and SS330 (steel sheet)–A5052 (aluminum sheet), were studied. A structural adhesive was used for the joining of steel and aluminum at adhesion strengths of 10, 22, and 30 MPa. To demonstrate that the three-point bending properties depend on the difference in strength between steel and aluminum and adhesion strength, optical microscopy (OM), scanning electron microscopy (SEM), and finite-element analysis (FEA) were performed. According to the results of the bending tests on both multi-materials under the same stacking conditions, the flexural stress increased with the improvement in the adhesion strength until interface separation or aluminum fracture. At the same adhesion strength, the DP590 (lower)–A356 (upper) and SS330 (upper)–A5052 (lower) configurations exhibited a tendency to decrease in the sudden stress drop due to aluminum fracture and interface separation. The bending results were analyzed through the FEA and the stress distribution as a function of the stacking and adhesion strength was confirmed.