Recycled Untreated Rubber Waste for Controlling the Alkali–Silica Reaction in Concrete

Recycled rubber waste (RW) is produced at an alarming rate due to the deposition of 1.5 billion scrap tires annually around the globe, which causes serious threats to the environment due to its open land filling issues. This study investigates the potential application of RW in concrete structures for mitigating the alkali–silica reaction (ASR). Various proportions of RW (5%, 10%, 15%, 20%, and 25%) partially replaced the used aggregates. RW was procured from a local rubber recycling unit. Cubes, prisms, and mortar bar specimens were prepared using a mixture design recommended by ASTM C1260 and tested for evaluating the compressive and flexural strengths and expansion in an ASR conducive environment for specimens incorporating RW. It was observed that the compressive and flexural strength decreased for specimens incorporating RW compared to that of the control specimens without RW. For example, an 18% and an 8% decrease in compressive and flexural strengths, respectively, were observed for specimens with 5% of RW by aggregates volume at 28 days. Mortar bar specimens without RW showed an expansion of 0.23% and 0.28% at 14 and 28 days, respectively, indicating the potential ASR reactivity in accordance with ASTM C1260. A decrease in expansion was observed for mixtures incorporating RW. Specimens incorporating 20% of RW by aggregate volume showed expansions of 0.17% at 28 days, within the limit specified by ASTM C1260. Moreover, specimens incorporating RW showed a lower reduction in compressive and flexural strengths under an ASR conducive environment compared to that of the control specimen without RW. Micro-structural analysis also showed significant micro-cracking for specimens without RW due to ASR. However, no surface cracks were observed for specimens incorporating RW. It can be argued that the use of RW in the construction industry assists in reducing the landfill depositing issues with the additional benefit of limiting the ASR expansion.     

Predicting Compressive and Splitting Tensile Strengths of Silica Fume Concrete Using M5P Model Tree Algorithm

Compressive strength (CS) and splitting tensile strength (STS) are paramount parameters in the design of reinforced concrete structures and are required by pertinent standard provisions. Robust prediction models for these properties can save time and cost by reducing the number of laboratory trial batches and experiments needed to generate suitable design data. Silica fume (SF) is often used in concrete owing to its substantial enhancements of the engineering properties of concrete and its environmental benefits. In the present study, the M5P model tree algorithm was used to develop models for the prediction of the CS and STS of concrete incorporating SF. Accordingly, large databases comprising 796 data points for CS and 156 data records for STS were compiled from peer-reviewed published literature. The predictions of the M5P models were compared with linear regression analysis and gene expression programming. Different statistical metrics, including the coefficient of determination, correlation coefficient, root mean squared error, mean absolute error, relative squared error, and discrepancy ratio, were deployed to appraise the performance of the developed models. Moreover, parametric analysis was carried out to investigate the influence of different input parameters, such as the SF content, water-to-binder ratio, and age of the specimen, on the CS and STS. The trained models offer a rapid and accurate tool that can assist the designer in the effective proportioning of silica fume concrete.     

Investigation of Potential Use of Soybean Protein Isolate–Chinese Bayberry Tannin Extract Cross-Linked Films in Packaging Applications

The possibility of using commercial bayberry tannin (BT) from a Chinese source as a cross-linker and functional additive to develop soybean protein isolate (SPI)-based films was explored in this study by using the solvent casting method. In particular, the impacts of BT loading on the tensile strength, microstructure, thermal stability, water resistance and antioxidant capacity were fully investigated. The results reveal that SPI incorporated with BT yielded a phenolic–protein hybrid whose relevant films exhibited an improvement in tensile strength of around two times greater compared with native SPI as a result of the formed interactions and covalent cross-links, which could be proven using FTIR spectroscopy. The introduction of BT also led to the compact microstructure of SPI–BT films and enhanced the thermal stability, while the water vapor permeability was reduced compared with the control SPI film, especially at high loading content of tannin. Additionally, the use of BT significantly promoted the antioxidant capacity of the SPI-based films according to DPPH radical scavenging assay results. On this basis, Chinese bayberry tannin is considered a promising natural cross-linker and multifunctional additive that can be dedicated to developing protein-derived films with antioxidant activity for food packaging applications.     

Effect of maternal fasting on uterine arterial blood flow

AIM: To determine the effect maternal diet pattern on the uterine artery Doppler flow velocimetry. METHODS: This is a cross-sectional observational study. The uterine artery Doppler flow velocimetry was measured between 20 and 24 weeks' gestation in healthy pregnant women observing Ramadan. For each fasting mother, a non-fasting healthy pregnant woman was recruited as a control. Maternal blood glucose level was measured. RESULTS: A total of 106 pregnant women were studied. The mean hours since last oral intake were significantly longer, and the maternal glucose level was significantly lower in the study group than in the control group. The Mean (95% CI) of the uterine artery pulsatility index, resistance index, peak systolic velocity, end diastolic velocity and systolic/diastolic ratio was similar in both groups. CONCLUSION: Maternal fasting is not associated with significant changes in the uterine artery Doppler flow velocimetry.     

Synthesis,SAR studies,and insecticidal activities of certain N-heterocycles derived from 3-((2-chloroquinolin-3-yl)methylene)-5-phenylfuran-2(3H)-one against Culex pipiens L. larvae

An acid hydrazide derivative was synthesized and transformed into a variety of valuable N-heterocycles such as pyridazinone, oxadiazole, triazolopyridazinone, and triazole derivatives via reactions with certain carbon electrophiles such as 4-methoxybenzaldehyde, indole-3-carbaldehyde, pentan-2,4-dione, and carbon disulfide. The chemical structures of all prepared compounds were verified via their analytical and spectroscopic data. The insecticidal activity of the N-heterocycles was evaluated against field and lab strains of the third larval instar of Culex pipiens. All tested compounds exhibited higher larvicidal activity against the lab strains compared to the field strains, with dissimilar ratios. The obtained results demonstrate that the high toxicity achieved by oxadiazole followed the order of furanone, pyridazinone and hydrazide, with lower LC₅₀ values of the hydrazone and N-acetylpyridazinone derivatives compared to that of imidacloprid. Interestingly, these compounds are promising agents for insect pest control, especially since they are insoluble in water and can overcome the disadvantages of neonicotinoid applications in pest management programs.

A new series of N-heterocycles including pyridazinone, oxadiazole, triazolopyridazinone, and triazole derivatives were synthesized from the acid hydrazide via its reaction with certain carbon electrophiles.     

Valorization of Rice Husk and Straw Agriculture Wastes of Eastern Saudi Arabia: Production of Bio-Based Silica,Lignocellulose, and Activated Carbon

Bio-based silica, lignocellulose, and activated carbon were simply produced via the recycling of Hassawi rice biomass waste of Al-Ahsa governorate in the eastern Saudi Arabia region using a fast chemical treatment procedure. Rice husk and rice straw wastes were collected, ground, and chemically treated with sodium hydroxide to extract silica/silicate from the dried plant tissues. The liquid extract is then treated with acid solutions in order to precipitate silica/silicate at neutral medium. Lowering the pH of the supernatant to 2 resulted in the precipitation of lignocellulose. Thermal treatment of the biomass residue under N₂ gas stream resulted in activated carbon production. Separated products were dried/treated and characterized using several physical examination techniques, such as FT-IR, SEM/EDX, XRD, and Raman spectroscopy in order to study their structure and morphology. Silica and lignocelluloses products were then preliminarily used in the treatment of wastewaters and water-desalination processes.     

miRNA-binding site polymorphism in IL-15RA gene in rheumatoid arthritis and systemic lupus erythematosus: correlation with disease risk and clinical characteristics

Clinical Rheumatology - MiRSNPs may interfere with mRNA stability through effects on microRNAs (miRNAs)-mRNA interactions via direct changes in miRNA binding site or effect on the secondary...