Rates of, and the factors affecting, cycle helmet use among secondary schoolchildren in East Sussex and Kent

Objectives—To assess the level of cycle helmet wearing among young people in two counties in the South East of England in 1994, and to identify the factors associated with helmet wearing.     

Maternal mortality: a twenty-year survey at the King Faisal University Hospital, Al-Khobar, Eastern Saudi Arabia.

This was an institutional study of all maternal deaths that occurred among 56422 total births at the King Faisal University Hospital, Al-Khobar, Saudi Arabia, between 1983 and 2002. The underlying cause of each maternal death and potentially avoidable factors were analysed. There were 16 maternal deaths in the hospital during the study period, giving a maternal mortality rate of 28.4/100,000 births. The leading cause of death was haemorrhage in seven (43.75%) patients, followed by pulmonary embolism in four (25%) and general anaesthesia in two (12.5%) mothers. The risk factors noted were maternal age 35 years and parity 5 coupled with iron deficiency anaemia. The main avoidable factors were failure of the patients to seek timely medical care and to follow medical advice. More than half the number of direct obstetrical causes of death was thought to be preventable. A rapidly changing attitude of women towards childbirth is occurring through progressively increasing female education and community health programmes in the region. Further reduction of maternal mortality rates in the community is envisaged through greater patient acceptance of medical advice, family spacing and proficient obstetric services.     

Construction of 0D/2D Schottky Heterojunctions of ZnO and Ti3C2 Nanosheets with the Enriched Transfer of Interfacial Charges for Photocatalytic Hydrogen Evolution

The development of cost-effective co-catalysts of high photocatalytic activity and recyclability is still a challenge in the energy transformation domain. In this study, 0D/2D Schottky heterojunctions, consisting of 0D ZnO and 2D Ti₃C₂, were successfully synthesized by the electrostatic self-assembling of ZnO nanoparticles on Ti₃C₂ nanosheets. In constructing these heterojunctions, Ti₃C₂ nanosheets acted as a co-catalyst for enhancing the transfer of excitons and their separation to support the photocatalytic response of ZnO. The as-prepared ZnO/Ti₃C₂ composites demonstrate an abbreviated charge transit channel, a huge interfacial contact area and the interfacial electrons’ transport potential. The extended optical response and large reactive area of the ZnO/Ti₃C₂ composite promoted the formation of excitons and reactive sites on the photocatalyst’s surface. The ZnO/Ti₃C₂ Schottky heterojunction showed significantly high photocatalytic activity for hydrogen production from a water–ethanol solution under the light illumination in the visible region. The hydrogen evolution overoptimized the ZnO/Ti₃C₂ composition with 30 wt.% of Ti₃C₂, which was eight times higher than the pristine ZnO. These findings can be helpful in developing 0D/2D heterojunction systems for photocatalytic applications by utilizing Ti₃C₂ as a low-cost co-catalyst.     

Recent Advances in Adsorptive Nanocomposite Membranes for Heavy Metals Ion Removal from Contaminated Water: A Comprehensive Review

Water contamination is one of the most urgent concerns confronting the world today. Heavy metal poisoning of aquatic systems has piqued the interest of various researchers due to the high toxicity and carcinogenic consequences it has on living organisms. Due to their exceptional attributes such as strong reactivity, huge surface area, and outstanding mechanical properties, nanomaterials are being produced and employed in water treatment. In this review, recent advances in the use of nanomaterials in nanoadsorptive membrane systems for wastewater treatment and heavy metal removal are extensively discussed. These materials include carbon-based nanostructures, metal nanoparticles, metal oxide nanoparticles, nanocomposites, and layered double hydroxide-based compounds. Furthermore, the relevant properties of the nanostructures and the implications on their performance for water treatment and contamination removal are highlighted. The hydrophilicity, pore size, skin thickness, porosity, and surface roughness of these nanostructures can help the water permeability of the nanoadsorptive membrane. Other properties such as surface charge modification and mechanical strength can improve the metal adsorption effectiveness of nanoadsorptive membranes during wastewater treatment. Various nanocomposite membrane fabrication techniques are also reviewed. This study is important because it gives important information on the roles of nanomaterials and nanostructures in heavy metal removal and wastewater treatment.     

Antiosteoporotic chemical constituents from Er-Xian Decoction, a traditional Chinese herbal formula

AIM OF THE STUDY: Er Xian Decoction (EXD), a traditional Chinese medicine formula, has long been used for the treatment of osteoporosis and menopausal syndrome in China. The present study was designed to investigate the antiosteoporotic constituents of EXD, and evaluate their antiosteoporotic effects in ovariectomized rats. MATERIALS AND METHODS: Osteoblasts in neonatal calvaria cultures and osteoclasts derived from rat marrow cells were used to bioactivity-guided screen the active constituents. The proliferation of osteoblast was assayed by MTT methods. The activity of ALP and TRAP was measured by p- nitrophenyl sodium phosphate assay. The antiosteoporotic effects of icariin (1), anemarsaponin B II (8) and berberine (6) were verified by using OVX rats model. The bone mineral density (BMD) was measured by dual-energy X-ray absorptiometry using the small animal scan mode. The undecalcified longitudinal proximal tibial metaphysical (PTM) sections were cut and stained for the bone histomorphometric analysis. RESULTS: Bioactivity-guided fractionation has led to the successful isolation of antiosteoporotic constituents, i.e., icariin (1), icariside I (2), baohuoside I (3), mangiferin (4), neomangiferin (5), berberine (6), anemarsaponin B (7), anemarsaponin BII (8), anemarsaponin C (9), anemarrhenasaponin I (10), rubiadin-1-methyl ether (11) and obaculactone (12) from EXD. Further study showed that icariin (1), anemarsaponin BII (8) and berberine (6) increased the BMD in ovariectomized rats, and icariin (1) not only increased the bone formation, but also inhibited bone resorption; anemarsaponin BII (8) mainly increased bone formation and berberine (6) only inhibited the bone resorption in ovariectomized rats. CONCLUSION: Our findings demonstrate that multiple ingredients are responsible for antiosteoporotic activity in traditional Chinese medicine formula Er-Xian decoction.     

Diluted magnetic semiconductor properties in TM doped ZnO nanoparticles

The hydrothermal method was used to create dilute magnetic semiconductor nanoparticles of Zn_1−xCo_xO (x = 0, 0.01, 0.05, 0.09). The effect of cobalt doping on the microstructure, morphological and optical properties of Zn_1−xCo_xO was also studied and the Co doping to host ZnO was confirmed from XRD and EDX analysis. The structural analysis showed that doping of cobalt into ZnO decreased the crystallinity, but the preferred orientation didn''t change. SEM analysis revealed that the cobalt dopant did not have a strong influence on the shape of the synthesized nanoparticles. No defect-related absorption peaks were observed in the UV-Vis spectra. The crystallinity of the doped samples was improved by high growth temperature and long growth time. Ferromagnetic behavior above room temperature was detected in co-doped ZnO nanoparticles. The ferromagnetic behavior increased with increasing Co (up to x = 0.05) doping. The ferromagnetic behavior declined when the Co content was further increased. Related research shows that doped ZnO nanoparticles have better dielectric, electrical conductivity, and magnetic properties than pure ZnO. This high ferromagnetism is usually a response reported for dilute magnetic semiconductors. These semiconductor nanoparticles were further used to designed spintronic based applications.

The enlarged central part M–H loop shows for the Co = 0.09 doped ZnO sample, the ferromagnetic (FM) behavior increased, i.e., a M_r of 0.2412 emu g⁻¹ with a H_c of 85 Oe.     

Effects of Wax Molecular Weight Distribution and Branching on Moisture Sensitivity of Asphalt Binders

Wax is an important factor that affects the durability of asphalt binder. In order to understand the molecular weight distribution and branching of wax on the moisture sensitivity of asphalt binder, pure wax-doped asphalt binders are prepared and the performance of model asphalt binders are evaluated by surface free-energy (SFE) and binder bond strength (BBS) tests. In addition, asphaltene is regarded as an additive in this study. The results show that the addition of eicosane, triacontane, squalane and asphaltene can reduce the moisture sensitivity of asphalt, but not necessarily improve its moisture-induced damage resistance. The physical hardening effect of high-wax asphalt and its model asphalt is stronger than that of the corresponding low-wax asphalt and its model asphalt, and its moisture sensitivity is weaker than that of the low-wax asphalt. For all the model asphalts, there is a good correlation between the cohesion work, cohesion POTS (pull-off tensile strength), POTS ratio (the BBS moisture sensitivity index) and ER (the SFE moisture sensitivity index). When using the BBS test to characterize the moisture sensitivity of high-wax asphalt, it is recommended to leave the sample for some time until it is physically hardened and stable.     

Mixed germ cell tumor of the pineal gland in a pediatric patient

Tumors of the pineal region are a rare clinical entity, comprising approximately 3%-8% of pediatric tumors. Based on their histopathological features, they are typically classified as pineal parenchymal tumors and germ cell tumors, with the latter being more prevalent. Clinical presentation is heterogeneous, with symptoms arising either due to tumor invasion or compression of adjacent neurovascular structures and increased intracranial pressure. Imaging studies are paramount in evaluating pineal region lesions and establishing an accurate diagnosis, with MRI representing the gold standard. Herein, we present the case of a 16-year-old boy presented with recurrent headaches. A head MRI revealed a pineal gland lesion. Histopathological examination confirmed the diagnosis, and the patient underwent a successful gross total resection (GTR) of the tumor. This case report seeks to draw attention to the elusive clinical presentation and management of this infrequently encountered tumor, as well as emphasize the importance of considering pineal gland tumors in the differential diagnosis of recurrent, chronic headaches in pediatric patients.     

Design and Validation of Additively Manufactured Metallic Cellular Scaffold Structures for Bone Tissue Engineering

Bone-related defects that cannot heal without significant surgical intervention represent a significant challenge in the orthopedic field. The use of implants for these critical-sized bone defects is being explored to address the limitations of autograft and allograft options. Three-dimensional cellular structures, or bone scaffolds, provide mechanical support and promote bone tissue formation by acting as a template for bone growth. Stress shielding in bones is the reduction in bone density caused by the difference in stiffness between the scaffold and the surrounding bone tissue. This study aimed to reduce the stress shielding and introduce a cellular metal structure to replace defected bone by designing and producing a numerically optimized bone scaffold with an elastic modulus of 15 GPa, which matches the human’s cortical bone modulus. Cubic cell and diagonal cell designs were explored. Strut and cell dimensions were numerically optimized to achieve the desired structural modulus. The resulting scaffold designs were produced from stainless steel using laser powder bed fusion (LPBF). Finite element analysis (FEA) models were validated through compression testing of the printed scaffold designs. The structural configuration of the scaffolds was characterized with scanning electron microscopy (SEM). Cellular struts were found to have minimal internal porosity and rough surfaces. Strut dimensions of the printed scaffolds were found to have variations with the optimized computer-aided design (CAD) models. The experimental results, as expected, were slightly less than FEA results due to structural relative density variations in the scaffolds. Failure of the structures was stretch-dominated for the cubic scaffold and bending-dominated for the diagonal scaffold. The torsional and bending stiffnesses were numerically evaluated and showed higher bending and torsional moduli for the diagonal scaffold. The study successfully contributed to minimizing stress shielding in bone tissue engineering. The study also produced an innovative metal cellular structure that can replace large bone segments anywhere in the human body.