The objective of this study was to investigate the effects of precuring of primer coated on bracket bases on the strength of bonds between metal brackets and gold alloy. Square type III gold alloy plates were sandblasted with 30 μm silicon dioxide. After silica coating, excessive particles were removed gently with air. Silane was then applied, and maxillary central incisor metal brackets were bonded to each conditioned alloy surface with Transbond XT. Half of the specimens were precured at the bracket base after primer coating and the other half was not precured before bonding to the alloy surface. After bracket positioning, samples were cured using a light emitting diode (LED) for 40 seconds. Shear bond strengths were tested and adhesive remnant index (ARI) was evaluated after 1 hour and 24 hours. The primer precuring and 24 hours group exhibited highest bond strength (12.53 MPa) and the no precuring and 1 hour group showed lowest bond strength (5.58 MPa). Precured groups showed lower ARI scores. Due to the shallow curing depth of LED light and inhibition of transillumination at the metal surface, primer precuring at the bracket base is required for secure bracket bonding on gold alloy surfaces using LED curing units. 相似文献
This report describes a novel concept of 3-dimensional tooth movement by using biocreative therapy to provide unrestricted distal movement of the full mandibular dentition. The patient was a 26-year-old Korean woman with multiple problems, including a collapsed occlusion, a full-step Class III relationship with posterior open bite, a crossbite, temporomandibular joint pain, and a tendency for root resorption. Two orthodontic miniplates with tubes were initially placed on both retromolar pads for distalization; 1 miniplate was relocated to the anterior region for angulation and vertical control of the anterior teeth. The total treatment period was 13 months. The occlusion was finished in Class I molar and canine relationships with optimal overjet and overbite. Posttreatment records 2.5 years later showed a stable treatment outcome. The results suggest that an orthodontic miniplate is an efficient tool for the treatment of a collapsed occlusion by changing the affected arch only. 相似文献
This study employed the electrical spark discharge method to prepare platinum iodide nanocolloids at normal temperature and pressure. Wires composed of 99.5% platinum were applied as the electrodes, and 250 ppm liquid iodine was employed as the dielectric fluid. An electric discharge machine was applied to generate cyclic direct current pulse power between the electrodes. Five sets of turn-on and turn-off time (Ton–Toff) parameters, namely 10–10, 30–30, 50–50, 70–70, and 90–90 μs, were implemented to identify the optimal nanocolloid preparation conditions. An ultraviolet-visible spectroscope, a Zetasizer, and a transmission electron microscope were used to examine the nanocolloids'' properties. The results revealed that the Ton–Toff parameter set of 10–10 μs was the most ideal setting for platinum iodide nanocolloid preparation. With this parameter set, the characteristic wavelengths of the nanocolloid were 285 and 350 nm, respectively; its absorbance values were 0.481 and 0.425, respectively; and its zeta potential and particle size were −30.3 mV and 61.88 nm, respectively. This parameter set yielded maximized absorbance, satisfactory suspension stability, and minimized nanoparticle sizes for the nanocolloid.This study employed the electrical spark discharge method to prepare platinum iodide nanocolloids at normal temperature and pressure. 相似文献
Archives of Pharmacal Research - Insufficient efficacy of current single drug therapy of cancers have led to the advancement of combination drug-loaded formulations. Specifically, polymeric... 相似文献
Massively parallel sequencing (MPS) technologies enable the simultaneous analysis of short tandem repeats (STRs) and single nucleotide polymorphisms (SNPs). MPS also enables the detection of alleles of the minor contributors in imbalanced DNA mixtures. In this study, 59 STRs (amelogenin, 27 autosomal STRs, 7 X-STRs, and 24 Y-STRs) and 94 identity-informative SNPs of 119 unrelated Taiwanese (50 men, 69 women) were sequenced using a commercial MPS kit. Forty-eight nondegraded and 44 highly degraded two-person artificial DNA mixtures with various minor to major ratios (1:9, 1:19, 1:29, 1:39, 1:79, and 1:99) were analyzed to examine the performance of this system for detecting the alleles of the minor contributors in DNA mixtures. Likelihood ratios based on continuous model were calculated using the EuroForMix for DNA mixture interpretation. The STR and SNP genotypes of these 119 Taiwanese were obtained. Several sequence variants of STRs were observed. Using EuroForMix software based on the sequence data of autosomal STRs and autosomal SNPs, 97.9% (47/48) and 97.7% (42/43) of minor donors were accurately inferred among the successfully analyzed nondegraded and degraded DNA mixtures, respectively. In conclusion, combined with EuroForMix software, this commercial kit is effective for assignment of the minor contributors in nondegraded and degraded DNA mixtures.