Antitumor effect of synthetic derivatives of lipid A in an experimental model of colon cancer in the rat

Colon carcinoma is one of the most frequent causes of cancer death in industrialized countries. The patients generally die of the metastases. In a colon cancer rat model, the authors have shown that lipopolysaccharides from Escherichia coli induced the regression of carcinomatosis and cured 20%-30% of the rats. Some synthetic derivatives of lipid A, which are less toxic than lipopolysaccharides, were injected 14 days after the tumor cells. They induced the complete regression of peritoneal carcinomatosis consisting of numerous nodules measuring 1-5 mm in 20%-30% of rats. Only compounds with three or more hydroxymyristic acid residues were effective. In vivo effects were correlated with the capacity to induce the production of interleukin 1 and tumor necrosis factor but not with the capacity to induce macrophage-mediated cytolysis. It is therefore possible to synthesize weakly toxic derivatives of lipopolysaccharides retaining their antitumoral property in vivo.     

Cisplatinum Dose Dependent Response in Germ Cell Cancer Evaluated by Tumour Marker Modelling

This study presents an analysis on longitudinal tumour marker series in twenty-two patients with non-seminomatous germ cell cancers treated with cisplatinum (DDP) based combination chemotherapy. Series of alphafoetoprotein (AFP), human chorionic gonadotropin (HCG) and lactate dehydrogenase (LDH) were analyzed applying a dynamic mathematical marker model. The model analysis provided quantitated values for growth rate and treatment response in the marker producing cells. The analysis showed that LDH had to be above 2 000 U/l to be a trustworthy tumour marker. HCG producing cells tended to grow faster than AFP producing cells, and were 3-5-fold more sensitive to the chemotherapy given than AFP producing cells. Treatment response versus DDP dose appeared to be bi-phasic, but with no significant change in treatment efficiency within the given range of DDP doses.     

The genetics of alcoholisms and related disorders

The inheritance of alcohol abuse and other psychopathology in 862 men and 913 women adopted by non-relatives, was studied. Both male and female adoptees were at greater risk to develop alcohol abuse if their biological, but not their adoptive, parents were alcoholic. Three types of families with alcoholism were distinguished that differed in frequency of alcohol abuse, somatoform disorders in women and in relation to antisocial behaviour in male adoptees. The combination of both genetic and environmental risk factors was necessary for the development of alcoholism in the most common, milieu-limited type of alcoholism. In families with a less common, male-limited, type of vulnerability, alcohol abuse was highly heritable in men, but women had multiple somatic complaints and seldom abuse. In a third type of family the common vulnerability was expressed as antisocial behaviour with violent criminality and recurrent alcohol abuse in males, but as high frequency somatization in female relatives.     

The Frictional Behavior of Coated Guiding Archwires

Background: The vast range of orthodontic wires made of different alloys makes it increasingly difficult for orthodontists to judge them. Coated orthodontic wires form a group of innovative guiding archwires. Material and Methods: In the present in vitro study the frictional behavior of eight coated wires of different dimensions was investigated in archwire-guided canine retraction in the upper jaw. For this purpose five superelastic nickel titanium alloy wires (Titanol^/reg; Low Force River Finish Gold and Gold 2: Forestadent^®, Pforzheim Germany; Titanol^® Superelastic tooth Sentalloy Ionguard™: GAC, Central Islip, NY, USA; NITI Imagination™: GAC, Central Islip, NY, USA), two #-titanium wires (TMA^® Low Friction Ionguard: Ormco, Glendora, CA, USA; TMA^® Low Friction Ionguard Purple: Ormco, Glendora, CA, USA) and one steel wire (Stainless steel Imagination™: GAC, Central Islip, NY, USA) were selected. The coatings were made of Teflon^® or polyethylene, and by ion implantation. Three uncoated archwires (Rematitan^® Lite Dimple; Dentaurum, Pforzheim, German; Titanol^® Low Force River Finish: Forestadent^®, Pforzheim, Germany; BioForce Sentalloy™: GAC, Central Islip, NY, USA) were used for comparison purposes. The force losses due to friction were measured using the Orthodontic Measurement and Simulation System (OMSS). Results: The results indicated that all coatings can reduce frictional losses compared with an uncoated reference wire by the same manufacturer. Measured frictional losses ranged from 48.3-6.1% with the Teflon^® coatings reducing the frictional losses to less than 10% in some cases. Conclusion: An unequivocal correlation between the surface roughness and frictional forces of the wires could not be verified by scanning electron microscopy. Zusammenfassung Hintergrund: Die Vielzahl an orthodontischen Drähten aus diversen Legierungen macht es die Kieferorthopäden immer schwerer, sie zu beurteilen. Eine Gruppe von neu angebotenen Führungsbögen stellen die beschichteten orthodontischen Drähte dar. Material und Methode: In der vorliegenden In-vitro-Studie wurde das Reibungsverhalten von acht beschichteten Drähten unterschiedlicher Dimension bei den bogengeführten Eckzahnretraktion im Oberkiefer untersucht. Neben fünf Nickel-Titan-Drähten (Titanol^® Low Force River Finish Gold und Gold 2: Fa. Forestadent^®; Titanol^® Superelastic zahnfarben: Fa. Forestadent^®; BioForce Sentalloy Ionguard™: Fa. GAC; NiTi Imagination™: Fa. GAC) wurden zwei #-Titan- (TMA Low Friction Iongard: Fa. Ormco; TMA Low Friction Ionguard Purple: Fa. Ormco) und ein Stahldraht (Stainless Steel Imagination™: Fa. GAC) ausgewählt. Die Beschichtungen bestanden aus Teflon^®, Polyethylen oder Ionenimplantation. Als Referenz wurden drei unbeschichtete Drähte (Rematitan^® Lite Dimple: Fa. Dentaurum; Titanol^® Low Force River Finish: Fa. Forestadent^®; BioForce Sentalloy™: Fa. GAC) in die Untersuchung einbezogen. Die Reibungsverluste wurden mit dem Orthodontischen Mess- und Simulations-System (OMSS) bestimmt. Ergebnisse: Die Ergebnisse zeigten, dass alle Beschichtungen, verglichen mit einem unbeschichteten Referenzdraht desselben Herstellers, eine Reduktion der Reibungsverluste bewirken. Die gemessenen Reibungsverluste lagen zwischen 48,3% und 6,1%, wobei bei Teflon^®-Beschichtungen der Reibungsverlust zum Teil auf unter 10% sank. Schlussfolgerung: Ein eindeutiger Zusammenhang zwischen der Oberflächenrauheit und den Friktionswerten der Drähte konnte anhand von rasterelektronenmikroskopischen Aufnahmen nicht bestätigt werden.     

Osteocalcin 24-hour profiles during normal pregnancy.

The interpretation of previous data on osteocalcin during pregnancy has been complicated by the fact that serum levels, at least in nonpregnant women, display a significant circadian variation. In the present study, serum concentrations of osteocalcin were recorded for 24 h in 12 individual women. In 4 nonpregnant women, there were striking diurnal fluctuations during the sampling period, with values ranging from 0.5 to 4.0 ng/ml. One woman who was investigated in the 11th week of pregnancy showed similar fluctuations in osteocalcin concentrations whereas in the 15th and 17th week values were much lower with minor fluctuations. In 4 women investigated during late pregnancy (weeks 34-38), osteocalcin serum levels were extremely low (range 0.2-0.4 ng/ml), often below the detection limit of the assay, and there was no diurnal variation. Also, in 1 lactating woman, osteocalcin serum levels were low (0.3-0.8 ng/ml) and stable. Low osteocalcin values during pregnancy may indicate a reduced bone turnover possibly mediated via an altered estrogen and growth hormone secretion.     

Ultrasound diagnosis of fetal lung maturity--a new method]

First results are presented to determine the maturity of fetal lung by sonography. Using the fetal liver as a reference-organ we are avoiding the known pitfalls which made it impossible in the past to standardize the fetal lung changes depending on the age of gestation. We examined 104 patients between week 27 and week 41. In one ultrasound section cut we depicted as well lung and liver. According to the known A-mode we registered frequencies in both organs. The registered frequencies were entered digitally into a computer and checked for f(mean), f(max) and f(min). Afterwards the frequencies of the lung were divided by those of the liver. Of all weeks of gestation the mean value and standard deviation were calculated. We found the liver as an adequate reference-organ, since there is no change of the reflection pattern between the different weeks of gestation, while there are significant changes to be registered in the fetal lung, a cutting line being week 35. A quotient of f(mean) lower than 1.1 hints to lung maturity while values over 1.1 point to immaturity. This was confirmed by several cases of analysis of amniotic fluid (L/S-ratio). Further comparisons with amniotic fluid results will have to validate these findings.