Agroinfection of cloned Sri Lankan cassava mosaic virus DNA to <Emphasis Type="Italic">Arabidopsis thaliana</Emphasis>, <Emphasis Type="Italic">Nicotiana tabacum</Emphasis> and cassava

Sri Lankan cassava mosaic virus (SLCMV) is a bipartite begomovirus infecting cassava in India and Sri Lanka. We have used Agrobacterium-mediated inoculation (agroinoculation) of cloned SLCMV DNA to inoculate additional hosts, Nicotiana tabacum and Arabidopsis. Although SLCMV infection in these hosts caused stunting, leaf deformation and developmental abnormalities, accumulation levels of viral DNA in the infected plants suggested that this virus was poorly adapted to them. In the natural host, cassava, agroinoculation produced infection at a low frequency. The monopartite nature of SLCMV, reported earlier in N. benthamiana, was maintained in the new hosts as well as in cassava.     

PCR-RFLP analysis indicates that recombination might be a common occurrence among the cassava infecting begomoviruses in India

Cassava mosaic disease (CMD) is caused in India by two bipartite begomoviruses, Indian cassava mosaic virus (ICMV), and Sri Lankan cassava mosaic virus (SLCMV). Polymerase chain reaction-restriction fragment length polymorphism (PCR-RFLP) was used as a rapid means of investigating the molecular diversity of ICMV and SLCMV in 38 samples of CMD-affected cassava plants under field conditions in new areas of cassava cultivation, along with traditional areas in southern India. A very large proportion of the samples showed SLCMV, based on a discriminatory PCR between SLCMV and ICMV, reported earlier. PCR-RFLP analysis of three regions of viral DNA indicated that in most samples, although the AC1 and the AV1 resembled SLCMV, as expected, the intergenic regions (binding site for host replication machinery) resembled ICMV more closely, indicating recombination events between ICMV and SLCMV. Results also indicate that the AC1 is more conserved within SLCMV compared to the AV1 gene.     

First evidence of chikungunya virus infection in Assam, Northeast India

During June-September 2008, an illness characterized by fever, headache and joint pain was reported in Assam state, northeast India. It presented characteristic features resembling chikungunya or dengue virus infection based on clinical symptoms. Dengue and chikungunya IgM antibody was detected in 10.0% (28/280) and 3.6% (10/280) patients respectively. The chikungunya positive patients did not travel to and from any endemic region confirming indigenous transmission. Persistent arthralgia and hearing loss has been observed in a recovered patient. Entomological surveys revealed the presence of vectors viz. Aedes aegypti and Aedes albopictus. This is the maiden report of chikungunya occurrence in Northeast India.     

Biochanin A impedes STAT3 activation by upregulating p38δ MAPK phosphorylation in IL-6-stimulated macrophages

Inflammation Research - IL-6-induced STAT3 activation is associated with various chronic inflammatory diseases. In this study, we investigated the anti-STAT3 mechanism of the dietary polyphenol,...     

Iron oxide coated hollow poly(methylmethacrylate) as an efficient adsorption media for removal of arsenic from water

Adsorption of arsenic onto iron-based adsorption media has been established as a convenient method for the removal of arsenic from contaminated water. The study describes the efficiency of iron oxide coated hollow poly(methyl methacrylate) microspheres (FHM) as an adsorptive media for the removal of arsenic from water. Hollow poly(methyl methacrylate) microspheres (HPMM) were synthesized by solvent evaporation and an electroless plating technique and the surface of the polymer was coated with iron oxide (FeO) particles. Structural characterization was performed using Optical Microscopy (OM), Scanning Electron Microscopy (SEM), Fourier Transform Infrared spectroscopy (FTIR), Energy Dispersive X-ray diffraction (EDAX), and Thermogravimetric Analysis (TGA). A study on the effect of the varying initial concentration of arsenic ions on percentage removal was performed in the laboratory and the adsorption capacity of the adsorbent was measured. Adsorption isotherm studies were carried out to evaluate the adsorption efficiency of FHM in removing arsenic from contaminated water. The Langmuir and Freundlich isotherm models were used to analyze the equilibrium experimental data. The isotherm study revealed that Langmuir adsorption data are well fitted and the maximum adsorption capacity of FHM in removing arsenic is 10.031 mg g⁻¹. This high arsenic uptake capability combined with a low density of FHM makes it a potential material for arsenic removal particularly during the fabrication of lightweight portable water purification devices.

Adsorption of arsenic onto iron-based adsorption media has been established as a convenient method for the removal of arsenic from contaminated water.     

Dextran mediated MnFe2O4/ZnS magnetic fluorescence nanocomposites for controlled self-heating properties

Dextran mediated MnFe₂O₄/ZnS opto-magnetic nanocomposites with different concentrations of ZnS were competently synthesized adopting the co-precipitation method. The structural, morphological, magnetic, and optical properties of the nanocomposites were exhaustively characterized by XRD, HRTEM, FTIR, VSM techniques, and PL spectroscopy. XRD spectra demonstrate the existence of the cubic spinel phase of MnFe₂O₄ and the cubic zinc blend phase of ZnS in the nanocomposites. HRTEM images show the average crystallite size ranges of 15–21 nm for MnFe₂O₄ and 14–45 nm for ZnS. Investigation of the FTIR spectra reveals the incorporation of ZnS nanoparticles on the surface of MnFe₂O₄ nanoparticles by dint of biocompatible surfactant dextran. The nanocomposites exhibit both magnetic and photoluminescence properties. Photoluminescence analysis confirmed the redshift of the emission peaks owing to the trap states in the ZnS nanocrystals. The room temperature VSM analysis shows that the saturation magnetization and coercivity of MnFe₂O₄ nanoparticles initially increase then decrease with the increasing concentration of ZnS in the nanocomposite. The induction heating analysis shows that the presence of dextran enhances the self heating properties of the MnFe₂O₄/ZnS nanocomposites which can also be controlled by tailoring the concentration of the ZnS nanoparticles. These suggest that MnFe₂O₄/Dex/ZnS is a decent candidate for hyperthermia applications.

Illustration of the variation of SAR and ILP values with different concentrations for ac magnetic fields of amplitude H = 161 G and H = 226 G.     

Diastolic pressure indices offer a novel approach to predicting risk of graft loss after pediatric heart transplant

PH is a risk factor for GL after HTx. However, traditional parameters are not reliable predictors of risk in children. We hypothesized that DPI (dPAP and DPG) are predictive of GL in pediatric HTx recipients. The UNOS/SRTR database was reviewed to identify pediatric HTx recipients (age <18 years) between 1994 and 2013. Recipients with pretransplant hemodynamic data were grouped by diagnosis (CMP or CHD), and the groups were analyzed separately. Bivariate Cox regression analysis examined the association between hemodynamic variables and GL. DPI showed the strongest association with early GL in recipients with CMP (dPAP: HR = 1.25 [1.09‐1.42]; DPG: 1.24 [1.11‐1.38]). Among CHD recipients, DPI were associated with early GL in those with preexisting PH (dPAP: HR = 1.16 [1.01‐1.33]; DPG: HR = 1.10 [1.00‐1.21]). No cutoff values for “high‐risk” DPI were identified, but a continuous relationship between higher DPI and risk of early GL was observed. DPI are associated with early GL in select pediatric HTx recipients. Our findings suggest that DPI should be considered as part of routine hemodynamic assessment for pediatric HTx candidates.     

Current therapy: complications associated with rigid internal fixation of facial fractures

Rigid internal fixation (RIF) is commonly used for the anatomical reduction and fixation of facial fractures. This technique has many advantages over more traditional methods, such as wire osteosynthesis and maxillomandibular fixation. Properly placed RIF ensures a stable anatomical reduction and allows for immediate or early restoration of function. RIF has a number of complications associated with its use in facial trauma surgery including metal sensitivity, infection, neurologic injury, dental trauma, stress shielding, and malocclusion. Complication rates appear to be inversely proportional with operator skill and experience when using RIF.