Quantitative determination of biocytin in urine of patients with biotinidase deficiency using high-performance liquid chromatography (HPLC)

A specific method for the quantitative determination of biocytin from urine of biotinidase deficient patients is described using HPLC-separation and quantitative determination by an avidin binding method. Partial purification of biocytin from urine was achieved with an anion exchange resin and concentration of the eluate by lyophilization. The recovery of biocytin from urines was 95.3 +/- 5.9 (mean +/- SD). The precision of biocytin estimation in patients urines including the HPLC-sample preparation procedure varied between 5.9% and 10.5% (CV). Biocytin concentrations were measured in urine samples of 5 patients obtained during and/or before biotin therapy. Before treatment biocytin excretion ranged from 6.2-28.8 nmol/mmol creatinine. During therapy biocytin excretion increased to the 1.3 to 4-fold level in 3 out of 4 patients. However, there was no dose-related increase of biocytin excretion when pharmacological doses were administered. Apart from biocytin and biotin, patients excrete additional biotin derivatives. Some of these have been preliminary identified as bisnorbiotin and oxidation products of bisnorbiotin, biocytin and biotin.     

Transtemporal power- and frequency-based color-coded duplex sonography of cerebral veins and sinuses.

PURPOSETo determine the ability of transtemporal power- and frequency-based transcranial color-coded duplex sonography to aid in the assessment of cerebral veins and sinuses, as well as to provide reference data for flow direction and velocity.METHODSUsing a color duplex device equipped with a 2.0/2.5-MHz sector scan, we insonated 120 healthy volunteers and three patients with cerebral venous thrombosis.RESULTSIn subjects 20 to 59 years old, deep middle cerebral veins were identified in 88%, basal veins in 97%, straight sinuses in 60%, and transverse sinuses in 42%. The corresponding values for subjects 60 to 79 years old were 53%, 86%, 23%, and 20%, respectively. Velocities were highest in transverse and straight sinuses, slower in basal veins, and slowest in deep middle cerebral veins. Flow was directed lateromedially in the deep middle cerebral vein, rostrocaudally in the basal vein and straight sinus, and mediolaterally in the transverse sinus. Two patients with straight sinus thromboses showed reversed flow direction in the basal veins, and one patient with superior sagittal sinus thrombosis showed elevated velocities in a deep middle cerebral vein.CONCLUSIONTranstemporal power- and frequency-based color-coded duplex sonography enabled imaging and velocity measurements in deep cerebral veins in subjects 20 to 59 years old, but detection of the straight and transverse sinuses was low. In older subjects, only the basal vein was regularly assessed.     

The Frictional Behavior of Coated Guiding Archwires

Background: The vast range of orthodontic wires made of different alloys makes it increasingly difficult for orthodontists to judge them. Coated orthodontic wires form a group of innovative guiding archwires. Material and Methods: In the present in vitro study the frictional behavior of eight coated wires of different dimensions was investigated in archwire-guided canine retraction in the upper jaw. For this purpose five superelastic nickel titanium alloy wires (Titanol^/reg; Low Force River Finish Gold and Gold 2: Forestadent^®, Pforzheim Germany; Titanol^® Superelastic tooth Sentalloy Ionguard™: GAC, Central Islip, NY, USA; NITI Imagination™: GAC, Central Islip, NY, USA), two #-titanium wires (TMA^® Low Friction Ionguard: Ormco, Glendora, CA, USA; TMA^® Low Friction Ionguard Purple: Ormco, Glendora, CA, USA) and one steel wire (Stainless steel Imagination™: GAC, Central Islip, NY, USA) were selected. The coatings were made of Teflon^® or polyethylene, and by ion implantation. Three uncoated archwires (Rematitan^® Lite Dimple; Dentaurum, Pforzheim, German; Titanol^® Low Force River Finish: Forestadent^®, Pforzheim, Germany; BioForce Sentalloy™: GAC, Central Islip, NY, USA) were used for comparison purposes. The force losses due to friction were measured using the Orthodontic Measurement and Simulation System (OMSS). Results: The results indicated that all coatings can reduce frictional losses compared with an uncoated reference wire by the same manufacturer. Measured frictional losses ranged from 48.3-6.1% with the Teflon^® coatings reducing the frictional losses to less than 10% in some cases. Conclusion: An unequivocal correlation between the surface roughness and frictional forces of the wires could not be verified by scanning electron microscopy. Zusammenfassung Hintergrund: Die Vielzahl an orthodontischen Drähten aus diversen Legierungen macht es die Kieferorthopäden immer schwerer, sie zu beurteilen. Eine Gruppe von neu angebotenen Führungsbögen stellen die beschichteten orthodontischen Drähte dar. Material und Methode: In der vorliegenden In-vitro-Studie wurde das Reibungsverhalten von acht beschichteten Drähten unterschiedlicher Dimension bei den bogengeführten Eckzahnretraktion im Oberkiefer untersucht. Neben fünf Nickel-Titan-Drähten (Titanol^® Low Force River Finish Gold und Gold 2: Fa. Forestadent^®; Titanol^® Superelastic zahnfarben: Fa. Forestadent^®; BioForce Sentalloy Ionguard™: Fa. GAC; NiTi Imagination™: Fa. GAC) wurden zwei #-Titan- (TMA Low Friction Iongard: Fa. Ormco; TMA Low Friction Ionguard Purple: Fa. Ormco) und ein Stahldraht (Stainless Steel Imagination™: Fa. GAC) ausgewählt. Die Beschichtungen bestanden aus Teflon^®, Polyethylen oder Ionenimplantation. Als Referenz wurden drei unbeschichtete Drähte (Rematitan^® Lite Dimple: Fa. Dentaurum; Titanol^® Low Force River Finish: Fa. Forestadent^®; BioForce Sentalloy™: Fa. GAC) in die Untersuchung einbezogen. Die Reibungsverluste wurden mit dem Orthodontischen Mess- und Simulations-System (OMSS) bestimmt. Ergebnisse: Die Ergebnisse zeigten, dass alle Beschichtungen, verglichen mit einem unbeschichteten Referenzdraht desselben Herstellers, eine Reduktion der Reibungsverluste bewirken. Die gemessenen Reibungsverluste lagen zwischen 48,3% und 6,1%, wobei bei Teflon^®-Beschichtungen der Reibungsverlust zum Teil auf unter 10% sank. Schlussfolgerung: Ein eindeutiger Zusammenhang zwischen der Oberflächenrauheit und den Friktionswerten der Drähte konnte anhand von rasterelektronenmikroskopischen Aufnahmen nicht bestätigt werden.     

Frictional forces when rectangular guiding arches with varying edge bevel are employed

In orthodontic treatment employing arch guided tooth movement, rectangular wires are usually used to achieve three-dimensional controlled tooth movement. In the intention to optimize sliding mechanics and to improve the comfort of patients, edge beveled rectangular orthodontic wires are offered by different manufacturers. The objective of the study presented was to investigate the influence of differing but defined wire roundings on sliding mechanics of canine retraction. Employing the 0.018″ slot system, 0.016″×0.022″ standard steel wires (Remaloy and Remanium, Dentaurum Comp.) were tested. Force loss due to friction during canine retraction was determined using the Orthodontic Measurement and Simulation System (OMSS). In the arch guided distalization of canines, the average loss of force caused by friction was determined to be approximately 50%. Comparing wires with different edge bevel, the rounded wire in contrast to the wire with sharpest edge configuration results in a reduction of friction. Even a moderate wire rounding of the 0.016″×0.022″ steel wire results in about 10% reduction in frictional losses. However, dynamic analysis of tooth movement with the OMSS shows that there is no further improvement of sliding mechanics using wires with edge bevel exceeding the standard rounding of rectangular wires. In contrast, a strong edge bevel may result in a considerable loss of leveling.     

Laparoscopic (vs. Open) Live Donor Nephrectomy: A UNOS Database Analysis of Early Graft Function and Survival

The impact of laparoscopic (lap) live donor nephrectomy on early graft function and survival remains controversial. We compared 2734 kidney transplants (tx) from lap donors and 2576 tx from open donors reported to the U.S. United Network for Organ Sharing from 11/1999 to 12/2000. Early function quality (>40 mL urine and/or serum creatinine [creat] decline >25% during the first 24 h post-tx) and delayed function incidence were similar for both groups. Significantly more lap (vs. open) txs, however, had discharge creats greater than 1.4 mg/dL (49.2% vs. 44.9%, p = 0.002) and 2.0 mg/dL (21.8% vs. 19.5%, p = 0.04). But all later creats, early and late rejection, as well as graft survival at 1 year (94.4%, lap tx vs. 94.1%, open tx) were similar for lap and open recipients. Our data suggests that lap nephrectomy is associated with slower early graft function. Rejection rates and short-term graft survival, however, were similar for lap and open graft recipients. Further prospective studies with longer follow up are necessary to assess the potential impact of the laparoscopic procurement mode on early graft function and long-term outcome.     

Disposition of oral and intravenous pravastatin in MRP2-deficient TR- rats.

The aim of this study was to characterize the role of the efflux transporter Mrp2 (Abcc2) in the pharmacokinetics of orally and intravenously administered pravastatin in rats. Eight Mrp2-deficient TR- rats and eight wild-type rats were given an oral dose of 20 mg/kg pravastatin. Four TR- animals and four wild-type animals were studied after intravenous administration of pravastatin (5 mg/kg). The TR(-) rats showed a 6.1-fold higher mean area under the plasma concentration-time curve (AUC) of pravastatin (p < 0.001) after oral administration and a 4.7-fold higher AUC (p < 0.01) after intravenous administration of pravastatin as compared with the wild-type animals. The mean systemic (total) clearance of pravastatin was 4.6-fold higher (39.2 versus 8.50 l/h/kg, p < 0.001) and the mean V 4.3-fold higher (14.1 versus 3.29 l/kg, p < 0.01) in the wild-type rats. The mean renal clearance of pravastatin in the TR(-) rats was 16.5-fold increased as compared with the wild-type animals (0.695 versus 0.042 l/h/kg, p < 0.05). The increased systemic exposure to oral pravastatin in the TR- rats was associated with a greater inhibitory effect on 3-hydroxy-3-methylglutaryl CoA reductase, as shown by smaller lathosterol to cholesterol concentration ratios. These results suggest that the reduced biliary pravastatin excretion in the Mrp2-deficient TR- rats is partly compensated for by increased urinary excretion of pravastatin. Furthermore, intestinal Mrp2 does not appear to play a major role in the oral absorption of pravastatin in normal rats.