Isolation and Antibiogram of Clostridium tetani from Clinically Diagnosed Tetanus Patients

Clostridium tetani, the etiologic agent of tetanus, produces a toxin that causes spastic paralysis in humans and other vertebrates. This study was aimed for isolation, identification, and determination of antimicrobial susceptibility of C. tetani from clinically diagnosed tetanus patients. Isolation was done from deep-punctured tissues of the foot and arm injuries of 80 clinically diagnosed tetanus patients from the Pakistan Institute of Medical Sciences hospital. We successfully screened out five C. tetani isolates out of 80 samples based on the strain-specific characteristics confirmed through biochemical testing and toxin production. A disc diffusion method was used for antimicrobial susceptibilities and C. tetani isolates showed susceptibility to cefoperazone, chloramphenicol, metronidazole, penicillin G, and tetracycline, but were found to be resistant to erythromycin and ofloxacin. During animal testing, all the infected mice developed symptoms of tetanus. The results showed that identification of C. tetani is possible using biochemical and molecular tools and that the strains of C. tetani isolated had not developed resistance against the antibiotics most often used for the treatment of tetanus.     

Renal fractional flow reserve: a hemodynamic evaluation of moderate renal artery stenoses.

The objective of this study was to perform a hemodynamic evaluation of moderate (50-90%) renal artery stenosis (RAS) under conditions of rest and maximum hyperemia. Identifying patients with RAS who have hemodynamically significant stenoses and are most likely to benefit from revascularization is clinically important. Current methods used to evaluate RAS, including angiography, have limitations. Physiologic evaluation of RAS may have a role in identifying patients with hemodynamically significant stenosis. Patients with suspected renovascular hypertension due to aorto-ostial RAS were included in the study. Hyperemia was induced by administration of intrarenal papavarine. Translesional pressure gradients were measured and renal fractional flow reserve (FFR) was calculated using a 0.014' pressure guidewire. Thirteen patients and 14 arteries with moderately severe (50-90%) RAS were studied. The mean translesional pressure gradient rose from a baseline of 6.3 +/- 3.9 to 17.5 +/- 10.8 mm Hg with maximal hyperemia. The renal FFR ranged from 0.58 to 0.95. There was a poor correlation between angiographic stenosis measurement and the renal FFR (r = -0.18; P = 0.54) and the hyperemic translesional mean pressure gradient (r = 0.22; P = 0.44). There was an excellent correlation between renal FFR and the resting mean translesional pressure gradient (r = -0.76; P = 0.0016) and the hyperemic mean translesional pressure gradient (r = -0.94; P < 0.0001). Selective renal arterial papavarine administration induces maximum hyperemia, permitting the calculation of renal FFR in renal arteries with aorto-ostial stenoses. The renal FFR correlates well with other hemodynamic parameters of lesion severity, but poorly with angiographic measures of lesion severity.     

Numerical Modeling and Analysis of Ti6Al4V Alloy Chip for Biomedical Applications

The influence of cutting forces during the machining of titanium alloys has attained prime attention in selecting the optimal cutting conditions to improve the surface integrity of medical implants and biomedical devices. So far, it has not been easy to explain the chip morphology of Ti6Al4V and the thermo-mechanical interactions involved during the cutting process. This paper investigates the chip configuration of the Ti6Al4V alloy under dry milling conditions at a macro and micro scale by employing the Johnson-Cook material damage model. 2D modeling, numerical milling simulations, and post-processing were conducted using the Abaqus/Explicit commercial software. The uncut chip geometry was modeled with variable thicknesses to accomplish the macro to micro-scale cutting by adapting a trochoidal path. Numerical results, predicted for the cutting reaction forces and shearing zone temperatures, were found in close approximation to experimental ones with minor deviations. Further analyses evaluated the influence of cutting speeds and contact friction coefficients over the chip flow stress, equivalent plastic strain, and chip morphology. The methodology developed can be implemented in resolving the industrial problems in the biomedical sector for predicting the chip morphology of the Ti6Al4V alloy, fracture mechanisms of hard-to-cut materials, and the effects of different cutting parameters on workpiece integrity.     

Heavy metals transported through a multi-trophic food chain influence the energy metabolism and immune responses of Cryptolaemus montrouzieri

Ecotoxicology - Contamination of environment with heavy metals is increasingly becoming an issue of major concern across the globe. Heavy metals are highly toxic to humans as well as other...     

Erythrocytic phosphatidylserine exposure and hemostatic alterations in β-thalassemia intermediate patients

Introduction

Hypercoagulable state is one of the common findings in beta-thalassemia intermedia (β-TI), particularly in splenectomized patients, with infrequent blood transfusion. Abnormality of the red blood cells (RBC) membrane due to oxidative damage is suggestive of possible etiologies. Membrane lipid peroxidation increases the exposure of phosphatidylserine (PS) that plays a role in the activation of coagulation factors V and X, subsequently initiating thrombosis. Our aim of this study was to find the probable correlation of the alteration of the PS on the RBC outer membrane with the hypercoagulable state in the β-TI patients.

Materials and methods

Our cross-sectional study was conducted on 39 splenectomized β-TI patients and 38 age-matched healthy controls. The mean age was 37 years. Analysis of the PS exposure on the RBCs was performed by fluorescein isothiocyanate (FITC) conjugated AV protein .Measurement of the coagulation factors X, V and antithrombin III (AT-III) was performed. We also checked the D-dimer levels .Analysis was performed by SPSS16.

Results

Fluorescence of FITC-Annexin V labeling on patients RBCs were higher than healthy controls; (2.8 ± 2.2%) of the patients versus (0.4 ± 0.18%) in the control group and was statistically significant (P < 0.05). Mean levels of factor X and AT-III of the patients as compared with the control group decreased and showed significant difference (P < 0.05).

Conclusions

Circulation of thalassemic RBCs, which abnormally possess PS on RBC membrane outer surface, suggests the possibility of the gradual consumption of the coagulation factors in the presence of a chronic coagulability state.     

A novel method of surgical site infection surveillance after cardiac surgery by active participation of stake holders

We describe a comprehensive surveillance system involving infection control practitioners, surgeons, administrative staff, and patients aimed at improving the postdischarge surveillance of surgical site infections. The system was able to detect 22 infections out of 538 procedures, 95% of which were detected during the postdischarge period.     

Predictors of prolonged survival after allogeneic hematopoietic stem cell transplantation for multiple myeloma

A total of 149 patients with multiple myeloma (MM) who received allogeneic hematopoietic stem cell transplantation (allo-HCT) with myeloablative (MAC; n = 38) or reduced-intensity conditioning (RIC; n = 110) regimens at MD Anderson Cancer Center were evaluated. Of the total, 120 (81%) patients had relapsed or had refractory disease. Median age of MM patients was 50 (28-70) years with a followup time of 28.5 (3-164) months. The 100-day and 5-year treatment related mortality (TRM) rates were 17% and 47%, respectively. TRM was significantly lower with RIC regimens (13%) vs. 29% for MAC at 100 days (P = 0.012). The cumulative incidence of Grade II-IV acute graft-versus-host disease (GVHD) was 35% and chronic GVHD was 46%. PFS and OS at 5 years were 15% and 21%, respectively. In multivariate analysis, allo-HCT for primary remission consolidation was associated with longer PFS (HR 0.35; 95% CI, 0.18-0.67) and OS (HR 0.29; 95% CI 0.15-0.55), while absence of high-risk cytogenetics was associated with longer PFS only (HR 0.59; 95% CI 0.37-0.95). We observe that TRM has decreased with the use of RIC regimens, and long-term disease control can be expected in a subset of MM patients undergoing allo-HCT. Further studies should be conducted in carefully designed clinical trials in this patient population.     

Effect of bed head elevation during sleep in symptomatic patients of nocturnal gastroesophageal reflux

Background and Aim: Nocturnal gastro‐esophageal reflux causes heartburn and sleep disturbances impairing quality of life. Lifestyle modifications, like bed head elevation during sleep, are thought to alleviate the symptoms of gastroesophageal reflux. We tested the hypothesis that bed head elevation might decrease recumbent acid exposure compared to sleeping in a flat bed. Methods: Patients of symptomatic nocturnal reflux and documented recumbent (supine) reflux verified by esophageal pH test entered the trial. On day 1, baseline pH was measured while the patient slept on a flat bed. Then patients slept on a bed with the head end elevated by a 20‐cm block for the next 6 consecutive days from day 2 to day 7. The pH test was repeated on day 2 and day 7. Each patient acted as his own control. Results: Twenty of 24 (83.3%) patients with mean age of 36 ± 5.5 years completed the trial. The mean (± SD) supine reflux time %, acid clearance time, number of refluxes 5 min longer and symptom score on day 1 and day 7 were 15.0 ± 8.4 and 13.7 ± 7.2; P = 0.001, 3.8 ± 2.0 and 3.0 ± 1.6; P = 0.001, 3.3 ± 2.2 and 1.0 ± 1.2; P = 0.001, and 2.3 ± 0.6 and 1.5 ± 0.6; P = 0.04, respectively. The sleep disturbances improved in 13 (65%) patients. Conclusions: Bed head elevation reduced esophageal acid exposure and acid clearance time in nocturnal (supine) refluxers and led to some relief from heartburn and sleep disturbance.     

Dihydropyrimidinones: efficient one-pot green synthesis using Montmorillonite-KSF and evaluation of their cytotoxic activity

A simple, efficient, cost-effective, recyclable and green approach has been developed for the synthesis of new dihydropyrimidinone analogs via the Biginelli reaction. The methodology involves a multicomponent reaction catalyzed by “HPA-Montmorillonite-KSF” as a reusable and heterogeneous catalyst. This method gives an efficient and much improved modification of the original Biginelli reaction, in terms of yield and short reaction times under solvent free conditions. All the derivatives were subjected to cytotoxicity screening against a panel of four different human cancer cell lines viz. colon (Colo-205), prostate (PC-3), leukemia (THP-1) and lung (A549) to check their effect on percentage growth. MTT [3-(4,5-dimethylthiazol-yl)-diphenyl tetrazoliumbromide] cytotoxicity assay was employed to check IC₅₀ values. Of the synthesized analogs, 16a showed the best activity with IC₅₀ of 7.1 ± 0.8, 13.1 ± 1.4, 13.8 ± 0.9 and 14.7 ± 1.1 μM against lung (A549), leukemia (THP-1), prostate (PC-3) and colon (Colo-205) cancer lines, respectively. The 16a analog was further checked for its effect on cancer cell properties through clonogenic (colony formation) and scratch motility (wound healing) assays and thereby was found that it reduced both the colony formation and migratory properties of the lung cancer cell line (A549). Further, molecular docking studies were performed with 16a to show its binding mode.

The general method for the preparation of DHPM analogs; cytotoxic activity and binding mode of the most active derivative against PI3Kγ and CDK2 targets.