Dental status and treatment needs of a New Zealand institutionalised elderly population.

A survey of 359 elderly residents of rest homes and geriatric hospitals in the Manawatu and Horowhenua districts showed that approximately two-thirds were aged 80 or over, and 19.5 percent were dentate, with a mean 13.3 teeth per dentate subject. A mean of 4.6 teeth per dentate subject had caries of either the crown or root, or both. Older males had substantially higher extraction requirements than other subjects. The periodontal needs of the sample were generally low and dominated by the need for calculus removal.     

Effect of primer precuring on the shear bond strength of orthodontic brackets

Two adhesive systems, Transbond APC II (3M Unitek, Monrovia, Calif) and Quick Cure (Reliance Orthodontic Products, Itasca, Ill), were used to determine the efficacy of precuring the liquid resin primer phase of the systems to increase shear bond strength. One hundred sixty bovine incisors were divided into groups of 20 specimens. In 1 group, the primer was cured before placement of the bracket with the filled adhesive material, and, in the other group, the primer was not precured. The shear-peel bond strength was tested with a testing machine at 30 minutes and 24 hours. No statistically significant difference in bond strength was found between the groups that had or had not been precured. More adhesive remained on the teeth with the Transbond when the primer was not precured. There is no advantage or disadvantage in bracket bond strength by precuring the primer before placing the bracket and filled component of the adhesive.     

Gene expression analysis in cells of the dentine-pulp complex in healthy and carious teeth

Knowledge of the molecular events that occur in carious disease has so far been constrained due to difficulties in obtaining sufficient quantities of the dental tissues and cells involved. Our histological findings indicate that a pulp-odontoblast cellular complex can be obtained from carious and healthy human teeth when exposed to low-temperatures prior to pulpal extirpation and from rodent teeth processed at room-temperature. In contrast, pulpal tissue extracted from room-temperature processed human teeth and low-temperature processed rodent teeth resulted in the odontoblast layer remaining attached to the pulp chamber. Semi-quantitative RT-PCR (sq-RT-PCR) analysis confirmed that markers previously shown to be preferentially expressed in odontoblasts, namely dentin sialophosphoprotein (DSPP) and Nestin, amplified more readily from the extracted pulp-odontoblast complex, as compared to pulpal tissue alone, in both human and rodent samples. Subsequent gene expression analysis of collagen-1alpha and collagen-3alpha indicated levels were significantly higher in carious pulpal tissue. In addition, analysis characterising the expression of members of the transforming growth factor and bone morphogenic protein families and their receptors indicated in general, that these genes were expressed by healthy odontoblasts and up-regulated in both pulpal cells and odontoblasts in response to carious injury. Use of this temperature-sensitive dental tissue preparation procedure allows detection of differential gene expression in odontoblasts and other pulpal cells in healthy and carious tissue.     

Case report--Scanora imaging of an unusual unerupted tooth located entirely below the inferior dental canal

We present an unusual case of an unerupted tooth located beneath the inferior dental canal (IDC) seen as an incidental finding on a dental panoramic radiograph (DPR). An unerupted premolar was identified on the DPR lying horizontally and located entirely below the inferior dental canal in the first and second molar region. The crown was distally orientated and was somewhat demineralised. As this unerupted tooth appeared to have an intimate relationship with the inferior dental canal, which in turn had a close relationship with the distal roots of the lower left first molar, this relationship was investigated further. Spiral tomography using Soredex's Scanora unit was used to obtain three contiguous 2 mm thick cross-sectional images of the area, which showed the separation of the inferior dental canal from both the first molar tooth above and the unerupted premolar. This case highlights the role of Scanora cross-sectional imaging in establishing accurately the relationship between teeth and the inferior dental canal and to document the unusual position of this unerupted tooth.     

Facial pain as first manifestation of lung cancer: a case of lung cancer-related cluster headache and a review of the literature

Facial pain can, on rare occasions, be the presenting symptom of lung cancer. This report describes a patient with non-metastatic lung cancer, which was associated with attacks of debilitating facial pain, presenting as cluster headache. Moreover, 32 reported cases of lung cancer-related facial pain (including the present one) are reviewed, and their clinical features are summarized. The facial pain is almost always unilateral, and is most commonly localized to the ear, the jaws, and the temporal region. The pain is frequently described as severe and aching, and may be continuous or intermittent. Aggravation and expansion of the pain, digital clubbing, increased erythrocyte sedimentation rate, and hypertrophic osteopathy, may contribute to the diagnosis. Referred pain, due to invasion or compression of the vagus nerve, as well as paraneoplastic syndrome secondary to the production of circulating humoral factors by the malignant tumor cells, is implicated in the pathophysiology of facial pain associated with non-metastatic lung cancer. Radiotherapy and tumor resection with vagotomy are very effective in aborting the facial pain. Thus, lung cancer should be included in the differential diagnosis of facial pain that is atypical and/or refractory to treatment.     

An in vitro evaluation of the contents of root canals obturated with gutta percha and AH-26 sealer or Resilon and Epiphany sealer

The purpose of this study was to compare the contents of root canals obturated with gutta percha and AH-26 sealer (Dentsply, Tulsa, OK) to canals obturated with the Resilon and Epiphany (Pentron, Wallingford, CT) system. Canal contents were assessed by determining the percentage of canal space occupied by core material, sealer, voids, and debris. Forty extracted human maxillary anterior teeth were instrumented, and the teeth were randomly assigned to either the gutta percha/AH 26 group or the Epiphany/Resilon group. Canals were obturated, and the teeth were subsequently embedded in resin and sectioned horizontally at 2, 4, and 6 mm from the anatomic apex. Sections were photographed by using a low vacuum scanning electron microscope. Image-J (Wayne Rasband; National Institute of Health, Bethesda, MD) software was used to quantify the proportion of core material, sealer, voids, and debris in each canal. Percentages and statistical comparisons for each method were compared. There were no significant differences found among the two groups in terms of the percentage of core (p = 0.9), sealer (p = 0.58), debris (p = 0.999), or voids (p = 1.00). Additionally, there were no differences in the percentage of core material, sealer, debris, or voids at any of the examined levels (2, 4, or 6 mm).     

Core curricula for postdoctoral dental students: recent problems, potential solutions, and a model for the future

Development of common core curricula for the graduate advanced education/specialty programs in dental schools presents significant challenges. Similarities in graduate education accreditation standards justify such an approach, yet a core curriculum is difficult to achieve for a variety of reasons including scheduling constraints and the capacity of a common, single pathway curriculum to address the specific educational needs of postgraduate students in different disciplines. Additionally, many dental schools are experiencing severe shortages of qualified faculty to provide graduate program instruction. There are no previous reports regarding graduate core curricula and the definition/delivery of such core curricula in advanced education programs in dentistry although there are several reports in the medical literature that support the educational value of a unified core curriculum implemented in a modular format. Graduate curricula are typically designed to provide residents with advanced education/training beyond what is acquired during their predoctoral dental school experience. Advanced education programs must emphasize knowledge and skills that are discipline-specific; however, there is a large amount of common foundational material within the early phases of these programs. Dental schools have attempted to identify and present this common material within the context of an organized shared set of courses/seminars where residents from each advanced education program are scheduled simultaneously. However, there have been problems with the implementation of a shared core curricula including the following: 1) dissimilar educational backgrounds/abilities among residents; 2) relevance of material to all residents; 3) lack of central management; 4) scheduling conflicts; and 5) lack of adequate and consistent program evaluation. In an attempt to resolve these problems, a new comprehensive graduate core curriculum was implemented at the Marquette University School of Dentistry in 2000. This core curriculum was designed to 1) be user-friendly; 2) allow flexibility; 3) meet specific programmatic/accreditation needs for each advanced education program; and 4) provide assessment tools for continuous resident feedback and curriculum improvement. Assessment data obtained from residents, faculty, and program directors indicate that this approach has been successful and has transformed graduate education at Marquette. Thus, this model may prove useful for other institutions seeking to refine or develop graduate core curricula.     

A reconstructed computerized tomographic comparison of Ni-Ti rotary GT files versus traditional instruments in canals shaped by novice operators

AIM: The aim of this study was to compare the effects of preparation with conventional stainless steel Flexofiles and Gates Glidden burs versus nickel-titanium GT rotary files in the shaping of mesial root canals of extracted mandibular molars. METHODOLOGY: A total of 54 canals from 27 mesial roots of mandibular molar teeth were prepared using one of two methods by novice dental students. One canal in each root was prepared by a crown-down approach. utilizing stainless steel Flexofiles and Gates Glidden burs. The other canal was prepared using nickel-titanium GT rotary files in a crown-down fashion as recommended by the manufacturer. Preoperative CT scans of each root were recorded and 50 canal specimens were available for postoperative comparisons. Following canal shaping, postoperative scans were superimposed on the original images. Changes in canal area, canal transportation and thickness of remaining root structure at strategic levels of the root were analyzed. The time taken for each method was also noted. RESULTS: At the coronal and mid-root coronal one-third sections, the rotary GT files produced a significantly smaller postoperative canal area (P < 0.05). In the mid-root sections there was significantly less transportation of the root canal toward the furcation, and less thinning of the root structure with GT files compared to the stainless steel files (P < 0.05). Overall, there was greater conservation of structure coronally and more adequate shape in the mid-root level. The GT rotary technique was significantly faster than the stainless steel hand-held file technique (P < 0.0001). Two GT instruments fractured during the study. CONCLUSIONS: Under the conditions of this study, novice dental students were able to prepare curved root canals with Ni-Ti GT rotary files with less transportation and greater conservation of tooth structure, compared to canals prepared with hand instruments. The rotary technique was significantly faster.