Reproduktionsmedizin

Since the introduction of in vitro fertilization in 1978, reproductive medicine and its associated scientific fields have developed rapidly. In Germany, progress in this field is impeded by the German Embryo Protection Act. Exemplary are the prohibition of embryo selection and the ban on genetic testing of the pre-implantation embryo. Nevertheless, infertility treatment outcome has to be optimized within the framework of this law, with the aim of making treatment more efficient, lowering the incidence of multiple gestations, making ovarian hyperstimulation safer, as well as reducing the financial costs for the couple.     

Medizinische Beurteilungskriterien zu bandscheibenbedingten Berufskrankheiten der Lendenwirbelsäule (I)

Occupational diseases Nos. 2108 and 2110 correspond to intervertebral disc-related diseases of the lumbar spine from many years of carrying or lifting heavy loads, occupations in extreme postures of full flexion or oscillation of the whole body when seated, and which compel the cessation of all activities which are or could be the cause for the origin, exacerbation or recurrence of the disease. These occupational diseases came into force at the start of 1993, but there have been considerable problems in their implementation. The present Part I of the contribution is the result of the work of an interdisciplinary study group and contains medical criteria for the assessment of possibly strain-related clinical characteristics and the evaluation of other possible causes. Part II is to be published in Volume 4/2005 and will deal with questions related to forced cessation and to the assessment of the loss of earning ability. Agreement was reached in many areas related to the assessment of occupational claims. This should allow for evidence-based decision making in the future for the occupational diseases Nos. 2108 and 2110.     

Mikrofrakturierung bei fokalem Knorpelschaden

The microfracture technique and spongiolization using Pridie drilling are the most commonly used and highly cost-efficient operative therapies for restoration of cartilage in Germany. Microfracturing can be performed arthroscopically in various joints including the knee, ankle, elbow, and shoulder joint. Specifically designed instruments are recommended for this procedure. Steadman recently reported excellent results in a series of 72 patients undergoing microfracturing with a mean follow-up of 11 years showing consistent and long-term reduction of weight-bearing pain and swelling as well as improvement of daily activities. Ideal indications for this easy arthroscopic procedure of microfracture treatment include focal lesions up to 4 cm². Some studies have demonstrated that microfracturing results not merely in the formation of fibrocartilage but also in the induction of hyaline cartilage with superior properties.     

Multimodal—was ist das überhaupt?

In chronic pain syndromes multimodal treatment has proved its efficacy. However, multimodal treatment does not mean randomly combining different interventions in a potpourri of methods. Multimodal treatment must closely follow a well-proved conceptual framework. Those concepts may be well illustrated by therapy of back pain. The most elaborate model for understanding the transition from acute to chronic pain is fear avoidance. Based on this model chronic pain status is understood as a learned consequence, which resulted from patients’ anxious avoidance of body movements. In these cases, treatment of a physical pathology is not the main aim of therapy but rather functional restoration. Those multimodal programs meanwhile have demonstrated their effectiveness. However, good results not only depend on recognition of imperative elements in therapy but also on adhering to essential principles (avoidance of negative anticipation, adequate information with assurance techniques, no training of avoidance, recognition of elements of fear therapy).     

Der Einsatz des Prophy-Jet®-Gerätes zur Schmelzpolitur nach der Bracketentfernung

Zusammenfassung In einer In-vitro-Studie wurde die Einsatzfähigkeit des Prophy-Jet-^®-Gerätes für die Schmelzpolitur nach Bracketentfernung untersucht. In die Studie wurden drei verschieden stark gefüllte orthodontische Kleber einbezogen: Concise^®, Genie^® und Mono Lok^®. Alle Proben wurden rasterelektronenoptisch untersucht und fotografisch dokumentiert in Vergrößerungen zwischen 20- und 10 000fach. Die Oberflächenanalyse ergab, daß das Prophy-Jet^®-Gerät allein zur Schmelzpolitur nach Bracketentfernung nicht ausreicht, um unter klinisch vertretbarem Zeitaufwand (1 Minute/Zahn) eine kunststofffreie Schmelzoberfläche zu erzielen. Nach konventioneller makroskopischer Vorreinigung mit Scalern oder rotierenden Hartmetallfinierern zeigten sich nach fünfsekündiger Prophy-Jet^®-Bestrahlung noch geringe Kleberreste. Nach zehnsekündiger Expositionsdauer waren beim Mono Lok^®-Adhäsiv keine Kleberreste mehr nachweisbar, beim Concise^®-bzw. Genie^®-Adhäsiv fanden sich noch vereinzelte geringe Kleberinseln. Das Prophy-Jet^®-Gerät erscheint zur Unterstützung der Schmelzpolitur nach Bracketentfernung sinnvoll; eine sorgfältige Vorreinigung mit Hand- oder rotierenden Instrumenten ist jedoch erforderlich, um eine weitgehende Adhäsivreduktion zu erreichen. Die konventionelle Gummi- und Bimssteinpolitur kann nach 20sekündiger Prophy-Jet^®-Bestrahlung entfallen.

---

Summary The purpose of this in vitro investigation was to ascertain the effects of the Prophy-Jet^® air-powder abrasive system for enamel polishing after debonding. Three adhesives differing in filler content were included in this study: Concise^®, Genie^®, and Mono Lok^®. All specimens were examined by scanning electron microscopy and documented photographically at magnifications from 20 to 10 000. Surface analysis showed that using the Prophy-Jet^® exclusively is not sufficient to produce a clean and smooth enamel surface without residual adhesive after debonding and after one minute of exposure time, as might be justifiable in a clinical situation. After macroscopic conventional clean-up with scalers or rotary finishing instruments and five seconds of exposure time to the Prophy-Jet^® some occasional adhesive remnants could be located. After ten seconds of Prophy-Jet^® treatment all Mono Lok^®-adhesive was removed from the enamel surface; in the Concise^® and Genie^®-group few isolated adhesive remnants could be detected. The Prophy-Jet^® air-powder abrasive system was found to be efficient in supporting enamel polishing after debonding; but an accurate pretreatment with scalers or rotary finishing instruments is essential to achieve an extensive reduction of adhesive. Final polishing of the enamel surface with rubber wheels or prophy cup and pumice can be omitted after treatment with the Prophy-Jet^® for 20 seconds.

---

Résumé Le but de ce travail était d'éxaminer à l'aide d'une étude in vitro, l'emploi du Prophy Jet^® pour le polissage de l'émail après l'arrachage des brackets. Dans l'étude on a analysé trois substances adhésives différentes: Concise^®, Genie^® et Mono Lok^®. Après avoir examiné les spécimens par le microscope électronique à balayage, on les a documentés à l'aide de photos d'un grossissement de 20 à 10 000. L'analyse de la surface montre que la seule application du Prophy Jet^® (après l'arrachage des brackets) ne suffit pas pour obtenir une surface d'émail sans substance adhésive en un temps clinique d'une minute par dent. Après prétraitement macroscopique selon la méthode conventionnelle (scaler ou instruments montés sur tour) il demeurait encore de petits restes de la substance adhésive après l'application du Prophy Jet^® pendant cinq secondes. Après une durée d'application de dix secondes, on ne pouvait pas déceler de restes de Mono Lok^®, tandis qu'il y avait sporadiquement des restes de Concise^® et Genie^®. Ces résultats indiquent, que le Prophy Jet^® est efficace pour le polissage de l'émail après l'arrachage des brackets, mais on a tout de même besoin d'un nettoyage précédent minutieux avec des instruments convenables (scaler ou instruments montés sur le tour) pour obtenir une réduction considérable de la substance adhésive. On peut renoncer au polissage conventionnel à l'aide de caoutchouc ou de la pierre ponce après l'application du Prophy Jet^® pendant 20 secondes.

---

---

Vortrag auf der wissenschaftlichen Jahrestagung der Deutschen Gesellschaft für Kieferorthopädie 1985.     

Diacetyl-Induced Lung Disease

Diacetyl is a diketone flavouring agent that is commonly employed for buttery taste as well as other purposes. Industrial exposure to flavouring agents, particularly diacetyl, has recently been associated with bronchiolitis obliterans, a severe respiratory illness producing fibrosis and obstruction of the small airways. This has been most commonly reported in the microwave popcorn production industry, but it has occurred elsewhere. In addition to bronchiolitis obliterans, spirometry abnormalities (fixed airflow obstruction) and respiratory symptoms have been associated with exposure. A direct effect on the respiratory epithelium with the disorganised fibrotic repair appears most likely as the underlying mechanism. Current data suggest that diacetyl is the agent responsible, although it is possible that diacetyl is simply a marker for another causative agent.