Influence of Modified Epoxy Resins on Peroxide Curing,Mechanical Properties and Adhesion of SBR,NBR and XNBR to Silver Wires—Part II: Application of Carboxy-Containing Peroxy Oligomer (CPO)

This research was aimed at verifying the effect of carboxy-containing peroxy oligomer (CPO) addition on the possibility of rubber crosslinking and a subsequent adhesion of the modified rubber to silver wires. Three commonly industrially used rubbers were selected for the study: styrene–butadiene rubber (SBR), acrylonitrile–butadiene rubber (NBR) and carboxylated acrylonitrile–butadiene rubber (XNBR), together with carboxy-containing peroxy oligomer (CPO). An improvement in the adhesion of rubbers to silver wires was observed when applying the oligomeric peroxide with functional groups, with no deterioration of mechanical properties of the vulcanizates. Crosslinking synergy between dicumyl peroxide (DCP) and the modifier could hardly be observed. Nevertheless, the studies demonstrated, that to a small extent, even the CPO itself can crosslink NBR and especially XNBR, resulting in a material of notable elasticity and adhesion to silver wires.     

Electrochemical and X-ray Examinations of Erosion Products during Dressing of Superhard Grinding Wheels Using Alternating Current and Ecological Electrolytes of Low Concentration of Chemical Compounds

This article introduces significant cognitive and usable values in the field of abrasive technology especially in the development of new methods of the electrochemical dressing of superhard grinding wheels with metal bonds. Cognitive values mainly concern the elaboration of the theoretical backgrounds of the electrochemical digestion of compounds of grinding wheel metal bond and gumming up products of the cutting surface of grinding wheel (CSGW). Cognitive values also deal with determining the mathematical relationships describing the influence of technological conditions of dressing on shaping of cutting abilities of superhard grinding wheels. On the other hand, the useful values refer to the industry implementation of the elaborated method and equipment for the electrochemical dressing of suparhard grinding wheels using alternating current (ECDGW-AC). The cost of the device for the realization of this process is low and can be applied in the production conditions. The novel achievements presented in the article are: the elaboration of a new method and equipment for electrochemical dressing of superhard grinding wheels (ECDGW-AC), the selection of electrolytes of low concentration of chemical compounds, tests concerning the digestion of grinding wheel metal bond compounds and gumming up products of CSGW using X-ray analysis, as well as the determination of chemical reactions taking place during elaborated new dressing process, the elaboration of mathematical relationships describing influence of technological conditions of this process on dressing speed and shaping of cutting abilities of superhard grinding wheels, and the performance of technological tests of dressing of superhard grinding wheels using ECDGW-AC method. The elaborated method can be used in ambient temperature and does not cause thermal damages of abrasive grains of cutting surface of grinding wheel and is useful not only for dressing super hard grinding wheels but also for correcting their geometrical deviations.     

Synthesis,structural studies and biological properties of some phosphono-perfluorophenylalanine derivatives formed by SNAr reactions

Several novel phosphono-perfluorophenylalanine derivatives, as mimetics of phenylalanine, were synthesized by subjecting diethyl (2-(perfluorophenyl)-1-(phenylamino)ethyl)-phosphonate to S_NAr reactions with different types of nucleophiles such as thiols, amines and phenols. The structure of the products was confirmed using spectroscopic and spectrometric techniques. For two compounds X-ray single crystal diffraction analysis and DFT investigations were performed providing information in regard to the preferable conformation, hydrogen bonds and other interactions. The antiproliferative potency of some of the new phosphono-perfluorophenylalanine derivatives obtained as well as representatives of previously synthesized perfluorophenyl phosphonate analogues of phenylalanine was studied on selected glioma cell lines. Preliminary evaluation of the compounds drug likeness was examined with respect to Lipinski''s and Veber''s rules, and showed that they meet the criteria perfectly. MTT (3-(4,5-dimethyl-2-thiazolyl)-2,5-diphenyl-2H-tetrazolium bromide) assay results demonstrated that the compounds exhibit moderate activity against the glioblastoma multiforme cell lines (T98G and U-118 MG). Moreover most of the studied S_NAr reaction products displayed significantly higher inhibitory activity against both cancer cell lines than the parent diethyl (2-(perfluorophenyl)-1-(phenylamino)ethyl)phosphonate.

Several novel phosphono-perfluorophenylalanine derivatives, as mimetics of phenylalanine, were synthesized by subjecting diethyl (2-(perfluorophenyl)-1-(phenylamino)ethyl)-phosphonate to S_NAr reactions with thiols, amines and phenols.     

The release of metal ions from orthodontic appliances: Animal tests

Objective:To investigate the release of metal ions from an orthodontic appliance in tests on animals (pigs).Materials and Methods:An animal test was conducted on 24 pigs divided equally into an experimental and a control group. In total, 12 sets of experimental orthodontic plates were surgically inserted into pig snouts in the experimental group for 6 months. Noninvasive matrices (hair [0, 3, and 6 months]) and invasive matrices (kidneys, liver, lungs, aorta, and oral mucosa) were collected for multi-elemental analysis (inductively coupled plasma optical emission spectrometry) from the experimental and control groups.Results:The greatest differences in the content of toxic metals were found in the aorta (Ni level was 4.8 times higher in experimental than in the control group), in the cheek (Ni 3.5 times higher), and in the hair sampled after 3 months (Cr 3.4 times higher).Conclusions:The obtained data indicate that the products of corrosion have passed into selected tissues of pigs; however, the doses of toxic metal ions released from the appliance did not reach toxic levels.     

Atopic dermatitis patients carrying G allele in –1082 G/A IL-10 polymorphism are predisposed to higher serum concentration of IL-10

Introduction

Atopic dermatitis (AD) is a chronic skin inflammatory disease in which Th2-derived cytokines play an essential role. Aim of the study was to assess interleukin 4, 10 and 13 (IL-4, IL-10 and IL-13) serum concentrations in AD patients and to correlate the values with the occurrence of genotypes of selected polymorphisms in genes encoding these cytokines.

Material and methods

Seventy-six AD patients (mean age 11.4 years) and 60 healthy controls were enrolled in the study. Blood samples were analyzed for IL-4, IL-10 and IL-13 concentrations with ELISA assay and genotyping for –590C/T IL-4, –1082A/G IL-10 and –1055C/T IL-13 polymorphisms with PCR-RFLP.

Results

The obtained results revealed statistically higher serum concentration of IL-10 and IL-13 in AD patients when compared to healthy controls (10.30 pg/ml vs. 8.51 pg/ml for IL-10 and 5.67 pg/ml vs. 4.98 pg/ml for IL-13). There were no significant differences between AD patients and controls in regard to IL-4 serum level (5.10 pg/ml vs. 7.1 pg/ml). Analyzing the association between level of the examined cytokines and genotype polymorphisms –590 C/T for the IL-4 gene, –1082 A/G for the IL-10 gene and –1055 C/T for the IL-13 gene, we found a statistically higher IL-10 serum level among carriers of the G allele in the –1082 G/A IL-10 polymorphism both in AD and control groups. We did not find any significant differences between serum level of IL-4 and IL-13 in regard to genotype occurrence in examined polymorphisms: –590 C/T for the IL-4 gene and –1055 C/T for the IL-13 gene.

Conclusions

The obtained results confirm the genetic background of IL-10 synthesis in the Polish population.     

Preparation and Characterization of Acrylic Pressure-Sensitive Adhesives Crosslinked with UV Radiation-Influence of Monomer Composition on Adhesive Properties

In this study, syntheses of acrylate copolymers were performed based on the monomers butyl acrylate (BA), 2-ethylhexyl acrylate (2-EHA), and acrylic acid (AA) and the second-type unsaturated photoinitiator 4-acryloyloxybenzophenone (ABP). The structure of the obtained copolymers was confirmed via FT-IR spectroscopic analysis, and the viscosity and the content of non-volatile substances were determined. The adhesive films were then coated and cross-linked using ultraviolet radiation in the UV-C range at various doses (5–50 mJ/cm²). Due to the dependence of the self-adhesive properties of the adhesive layer on the basis weight, various basis weights of the layer in the range of 30–120 g/m² were tested. Finally, the self-adhesive properties were assessed: tack, peel adhesion, shear strength (cohesion) at 20 °C and 70 °C, as well as the SAFT test and shrinkage. The aim of the study was to determine the effect of the type of monomer used, the dose of ultraviolet radiation, and the basis weight on the self-adhesive and usable properties of the obtained self-adhesive tapes.     

Influence of Corrugated Web Geometry on Mechanical Properties of I-Beam: Laboratory Tests

This paper presents the results of experimental investigations performed on beams with corrugated webs. The aim of the research was to determine the effect of the geometric parameters of the sinusoidal web on the behavior of I-beams subjected to four-point bending. Special attention was paid to the effects of web thickness and wave geometry on the deflection of beams. The obtained failure modes of particular test samples are presented. Reference has also been made to the determined standard load capacities based on Annex D of the EC3 standard. In order to compare the performance of beams with corrugated webs, the results for beams with flat webs of the same thickness of web sheets are also presented.     

Mechanical Behaviour of Aluminium-Timber Composite Connections with Screws and Toothed Plates

This paper presents an investigation of the load-slip behaviour of aluminium-timber composite connections. Toothed plates with bolts are often used for connecting timber structural members with steel structural members. In this paper, toothed plates (C2-50/M10G, C2-50/M12G or C11-50/M12) have been used as reinforcement in aluminium-timber screwed connections for the first time. The push-out test specimens consisted of laminated veneer lumber slabs, aluminium alloy beams, and hexagon head wood screws (10 mm × 80 mm and 12 mm × 80 mm). Of the specimens, 12 additionally had toothed plates as reinforcement, while 8 had no reinforcement. The load carrying-capacity, the mode of failure and the load-slip response of the strengthened and non-strengthened screwed connections were investigated. The use of toothed plate connectors was found to be effective in increasing the strength of aluminium-timber composite connections and ineffective in improving their stiffness. The examined stiffness and strength of the connections can be used in the design and numerical modelling of aluminium-timber composite beams with reinforced screwed connections.