Beiträge zur Kenntniss der Wirkung der chlorsauren Salze

Ohne Zusammenfassung     

Rapid prototype patient-specific drill template for cervical pedicle screw placement.

OBJECTIVE: To assess the feasibility and accuracy of a drill template for the placement of a cervical pedicle screw in a single vertebral level. MATERIALS AND METHODS: A volumetric CT scan was performed on a cadaver cervical spine. Using computer software, a drill template with a predefined trajectory was constructed that was designed to match the posterior surface of the right side of the fifth cervical vertebra. A physical template was created from the computer model using a rapid prototyping machine. The drill template was used to guide drilling of a pilot hole, and a CT scan was performed to assess the accuracy of this hole. A 3.5-mm diameter pedicle screw was placed in the pilot hole. The spine was then dissected to separate the vertebrae and the trajectory of the screw was visually inspected. RESULTS: The feasibility of this patient-specific rapid prototyping technique was demonstrated. Imaging and visual inspection confirmed accurate placement of the pilot hole and cervical pedicle screw without cortical violation. CONCLUSIONS: The potential use of drill templates to place cervical pedicle screws is promising. Our initial methodology appears to provide an accurate technique and trajectory for pedicle screw placement in the cervical spine.     

The shape of stress: the use of frequent sampling to measure temporal variation in S‐IgA levels during acute stress

Previous studies have indicated that statistically significant increases in Secretory immunoglobulin A (S‐IgA) can be achieved in as little as 5min as a result of mental stress. However, the temporal resolution of these changes is low and therefore the rate and pattern of changes during the stress task and during subsequent recovery is unclear. A within‐subjects design was used to examine levels of S‐IgA before, during and after a short (8 min) mental stress task. S‐IgA was measured from saliva samples obtained every 2 min during the entire 30‐min session. Significant increases in S‐IgA concentration were observed as early as the task instruction period, with additional increases during the stress task itself. The data also show a rapid recovery of S‐IgA, with a return to baseline levels within 6 min. Results suggest that S‐IgA changes can occur very rapidly and that the observed increases are short‐lived. Copyright © 2007 John Wiley & Sons, Ltd.     

In vitro effects of detergent sclerosants on coagulation, platelets and microparticles.

OBJECTIVES: To investigate the in vitro effects of Sodium Tetradecyl Sulphate (STS) and Polidocanol (POL) on clotting tests, clotting factors, platelets and microparticles. MATERIALS AND METHODS: Platelet rich (PRP) and platelet poor (PPP) plasmas were incubated with varying concentrations of STS and POL. Clotting tests, platelet/plasma turbidity, and microparticle studies were performed. Specimens were mixed with individual factor deficient plasmas and clotting factor activities were studied. RESULTS: STS at high concentrations (>0.3%) destroyed platelets, microparticles and the clotting factors V, VII and X. It prolonged all clotting tests including prothrombin time (PT), activated partial thromboplastin time (APTT), non-activated partial thromboplastin time (NAPTT), thrombin time (TT), factor Xa clotting time (XACT) and surface activated clotting time (SACT). Higher concentrations of POL were required to achieve some anticoagulant activity. Low sclerosant concentrations shortened XACT and SACT, and induced release of procoagulant platelet derived microparticles. Increased exposure time resulted in increased procoagulant activity. STS at concentrations higher than 0.5% precipitated a complex containing apolipoprotein b and fibrinogen. CONCLUSIONS: Detergent sclerosants affect the clotting mechanism by interfering with clotting factor activities, procoagulant phospholipids and platelet derived microparticles. STS has more anticoagulant activity than POL in high concentrations. Low concentration sclerosants demonstrate procoagulant activity.     

Mechanical Testing of Seven Fixation Methods for Generation of Compression Across a Midtarsal Osteotomy: A Comparison of Internal and External Fixation Devices

The purpose of this study was to assess 7 methods of fixation for a midtarsal osteotomy. Polyurethane foam models (N = 6) and cadaver specimens (N = 4-7) were used to examine the force generated by the different constructs of fixation. A midtarsal osteotomy was performed on each specimen in the test groups. The osteotomies were fixated either with 2 parallel 0.062-in Kirschner wires and 40-mm-long, 4-mm partially threaded, cancellous, cannulated titanium screws, an external ring fixator (frame), a frame with wires tensioned (tension), a frame with wires tensioned and compressed toward the osteotomy (tension and compression), a frame with tension, compression, and parallel Kirschner wires, or a frame with tension, compression, and two 4.0 cannulated parallel screws, respectively. Each model was fixated, and the force generated by the construct across the osteotomy was recorded via the use of pressure-sensitive film. Statistical analysis of the data in the polyurethane foam group determined that the use of frame with tension, compression, and two 4.0 parallel cannulated screws was statistically superior to 1) frame, 2) frame with tension, 3) 2 parallel Kirschner wires, 4) two 4.0 cannulated parallel screws, and 5) frame with tension and compression. A cadaver study determined that the frame with tension, compression, and 2 parallel Kirschner wires was statistically superior to 1) frame and 2) two parallel Kirschner wires. These findings suggest that there is a difference in the force generated by the type of fixation construct across a midtarsal osteotomy.     

Performance of Residents and Anesthesiologists in a Simulation-based Skill Assessment

Background: Anesthesiologists and anesthesia residents are expected to acquire and maintain skills to manage a wide range of acute intraoperative anesthetic events. The purpose of this study was to determine whether an inventory of simulated intraoperative scenarios provided a reliable and valid measure of anesthesia residents' and anesthesiologists' skill.

Methods: Twelve simulated acute intraoperative scenarios were designed to assess the performance of 64 residents and 35 anesthesiologists. The participants were divided into four groups based on their training and experience. There were 31 new CA-1, 12 advanced CA-1, and 22 CA-2/CA-3 residents as well as a group of 35 experienced anesthesiologists who participated in the assessment. Each participant managed a set of simulated events. The advanced CA-1 residents, CA-2/CA-3 residents, and 35 anesthesiologists managed 8 of 12 intraoperative simulation exercises. The 31 CA-1 residents each managed 3 intraoperative scenarios.

Results: The new CA-1 residents received lower scores on the simulated intraoperative events than the other groups of participants. The advanced CA-1 residents, CA-2/CA-3 residents, and anesthesiologists performed similarly on the overall assessment. There was a wide range of scores obtained by individuals in each group. A number of the exercises were difficult for the majority of participants to recognize and treat, but most events effectively discriminated among participants who achieved higher and lower overall scores.     

The health-related quality of life of male and female heavy smokers

Objectives: Heavy smokers are a segment of the smoking population who are at increased risk of smoking-related morbidity and least likely to achieve cessation. This study identifies the impact of heavy smoking on quality of life by gender and describes the subpopulation for improved targeting.Methods: South Australian representative population data (n = 3010) was used to compare the health-related quality of life status of male and female heavy smokers as assessed by the SF-36.