Profiles of sleep changes during the COVID‐19 pandemic: Demographic,behavioural and psychological factors

This study aimed to evaluate changes in sleep during the COVID‐19 outbreak, and used data‐driven approaches to identify distinct profiles of changes in sleep‐related behaviours. Demographic, behavioural and psychological factors associated with sleep changes were also investigated. An online population survey assessing sleep and mental health was distributed between 3 April and 24 June 2020. Retrospective questions were used to estimate temporal changes from before to during the outbreak. In 5,525 Canadian respondents (67.1% females, 16–95 years old: Mean ± SD = 55.6 ± 16.3 years), wake‐up times were significantly delayed relative to pre‐outbreak estimates (p < .001,  = 0.04). Occurrences of clinically meaningful sleep difficulties significantly increased from 36.0% before the outbreak to 50.5% during the outbreak (all p < .001, g ≥ 0.27). Three subgroups with distinct profiles of changes in sleep behaviours were identified: “Reduced Time in Bed”, “Delayed Sleep” and “Extended Time in Bed”. The “Reduced Time in Bed” and “Delayed Sleep” subgroups had more adverse sleep outcomes and psychological changes during the outbreak. The emergence of new sleep difficulties was independently associated with female sex, chronic illnesses, being employed, family responsibilities, earlier wake‐up times, higher stress levels, as well as heavier alcohol use and television exposure. The heterogeneity of sleep changes in response to the pandemic highlights the need for tailored interventions to address sleep problems.     

Cytotoxicity evaluation of four endodontic sealers

This study evaluated in vitro the cytotoxicity of four root canal sealers (Topseal, EndoRez, TubliSeal and Kerr Pulp Canal Sealer E.W.T.) and their effects on reactive oxygen/nitrogen intermediate induction by mouse peritoneal macrophages. Thioglycollate-induced cells were obtained from Swiss mice by peritoneal lavage with 5 mL 10 mM phosphate-buffered saline, washed twice and resuspended (10(6) cells/mL) in appropriate medium for each test. Cytotoxicity was determined by the presence of hydrogen peroxide (H2O2) and nitric oxide (NO) by the peroxidase-dependent oxidation of phenol red and Griess reaction, respectively. Sealer suspensions were obtained in two different concentrations from each material: 18 mg/mL and 9 mg/mL, established according to compatibility parameters following MTT assay. Comparing the sealers, H2O2 release at concentrations of 9 mg/mL and 18 mg/mL was similar: Topseal > positive control (medium + cells + 5 mg/mL zimozan solution) > EndoRez > TubliSeal > Kerr Pulp E.W.T. > negative control (medium + cells). NO release at concentration of 9 mg/mL was: positive control (medium + cells + 10 microg/mL LPS solution) > Topseal > Kerr Pulp E.W.T. > TubliSeal = EndoRez > negative control (medium + cells); at concentration of 18 mg/mL was: positive control > Topseal > Kerr Pulp E.W.T > TubliSeal > EndoRez > negative control. Based on the results, it may be concluded that Topseal presented the highest cytotoxicity among the tested sealers, releasing higher concentrations of NO and H2O2 in macrophage culture.     

Oral complaints in progressive systemic sclerosis: two cases report

Progressive systemic sclerosis is a chronic sclerotic disease which causes diffuse, increased deposition of extracellular matrix in connective tissue with vascular abnormalities, resulting in tissue hypoxia. Aesthetic and facial dysfunction are followed by important oral and facial manifestation of disturbances such as xerostomia, the lack of saliva in the mouth, and its associated complications. Most clinical manifestations begin with tongue rigidity. The facial skin changes and bone resorption of mandible angle are often reported. Other systemic changes include the involvement of internal organs which leads to serious complications as well as disorders in the cardiac muscle and Raynaud's phenomenon. The objective of the this paper is to report two cases of systemic sclerosis in patients with oral and facial manifestations of the disease. A brief review of the literature, focusing on deontological alterations is also presented.     

Antibiotic resistance of subgingival species during and after antibiotic therapy

AIM: The purpose of the present investigation was to determine the percentage and identity of antibiotic-resistant species in subgingival plaque and saliva samples from chronic periodontitis patients treated by scaling and root planing followed by orally administered amoxicillin or metronidazole. METHOD: In all, 20 chronic periodontitis patients were selected for study. After clinical and microbiological monitoring, subjects were randomly assigned to receive either orally administered amoxicillin at the dosage of 500 mg, 3 times daily for 14 days or orally administered metronidazole at the dosage of 250 mg, 3 times daily for 14 days. For the antibiotic resistance determinations, subgingival plaque samples were taken from six posterior teeth at baseline, and 90 days; and from two randomly selected teeth at 3, 7 and 14 days during and after antibiotic administration. Samples were plated on enriched blood agar plates with or without either 2 micro g/mL metronidazole or 2 micro g/mL amoxicillin. Colonies were counted at 7 days. Significant differences in percentage of resistant organisms over time were determined by the Quade test. Microbial growth was washed from antibiotic-containing media and the identity of species determined using checkerboard DNA-DNA hybridization. Data were compared with those obtained in a previous study from subjects receiving SRP only or SRP followed by 14 days of orally administered doxycycline. The level of doxycycline used to determine antibiotic resistance in that study was 4 micro g/mL. RESULTS: The mean percentage of resistant isolates increased during antibiotic administration and returned to baseline levels by 90 days post therapy. The mean percentages (+/- SEM) of isolates resistant to 2 micro g/mL metronidazole were 53 +/- 9, 65 +/- 9, 79 +/- 4 and 69 +/- 7 at baseline, 3, 7 and 14 days during antibiotic administration, and 57 +/- 4, 64 +/- 5, 62 +/- 7 and 47 +/- 6 at 3, 7, 14 and 90 days after antibiotic administration. At the same time points, the percentage of resistant isolates to amoxicillin was 0.5 +/- 0.2, 22 +/- 12, 14 +/- 5 and 37 +/- 11 during, and 31 +/- 11, 8 +/- 3, 3 +/- 2 and 3 +/- 0.6 after, administration. Antibiotic-resistant isolates of resistant species detected during or after therapy were also detected prior to therapy. The most prevalent resistant species in the metronidazole-treated group were: A. naeslundii 1, S. constellatus, A. naeslundii 2, S. mitis, S. oralis, A. odontolyticus, S. sanguis, and in the amoxicillin-treated group: S. constellatus, P. nigrescens, E. saburreum, A. naeslundii 1, S. oralis, P. melaninogenica and P. intermedia. CONCLUSIONS: Systemic antibiotic administration transiently increased the percentage of resistant subgingival species, but a major component of subgingival plaque remained sensitive to the agents during their administration. Antibiotic-resistant isolates of resistant species could be detected in samples both prior to and after therapy. However, % antibiotic-resistant isolates returned to baseline levels 90 days after antibiotic administration.     

Prevalence of maxillary sinus septa in 1024 subjects with edentulous upper jaws: a retrospective study

Maxillary sinus floor augmentation has been routinely performed to optimize dental implant placement in the posterior maxilla. However, complications during a sinus grafting procedure, such as perforation of the Schneiderian membrane, have been reported. This complication is generally associated with the presence of maxillary septa. Therefore, the aim of this retrospective study was to evaluate the prevalence of maxillary sinus septae in completely edentulous subjects by means of panoramic radiography. A total of 1024 panoramic radiographs were evaluated by 3 calibrated examiners. From these radiographs, 307 maxillary septa were detected in 221 subjects (21.58%); 86 (8.40%) of the subjects showed maxillary septa in both maxillary sinuses. Logistic regression failed to detect any correlation between the presence of maxillary septa, age, and gender (P > .05). Within the limits of the study, the prevalence of maxillary septa in this Brazilian population was shown to be moderate, indicating that dentists must be aware of the presence of this anatomic structure during maxillary sinus elevation grafting.     

Mechanical evaluation of space closure loops in orthodontics

This study evaluated the mechanical performance of teardrop-shaped loops and teardrop-shaped loops with helix used in orthodontic space closure. Sixty retraction loops made with 0.019" x 0.025" stainless steel (SS) and beta-titanium (BT) wires were used. They were attached to a testing machine to measure the magnitudes of the sagittal force and the load-deflection ratio necessary for 1 mm, 2 mm and 3 mm activation. The results demonstrated that the BT alloy presented significantly smaller mean values (p < 0.01) of sagittal force and load-deflection than the SS alloy. The loop with the highest mean value of sagittal force and load-deflection was the teardrop-shaped loop (p < 0.01). Differences were observed in the mean values of sagittal force and load-deflection among activations, and the highest mean value was found in the activation of 3 mm, while the smallest mean value was evident in the activation of 1 mm (p < 0.01). It could be concluded that the metallic alloy used and the presence of a helix in configuration of the loops may have a strong influence on the sagittal force produced and on the load-deflection ratio; the teardrop-shaped loops and teardrop-shaped loops with helix in BT presented the release of lighter forces; the teardrop-shaped loop in SS generated a high load-deflection ratio, providing high magnitudes of horizontal force during its deactivation.     

Delayed formation of a lower second premolar

Delayed odontogenesis of a lower second premolar is presented in a case treated without extraction and focuses on the 7-year follow-up of the delayed tooth bud. The follow-up was initiated when the crown formation was diagnosed and was finished when the tooth erupted completely into the orthodontically provided space, which enabled the orthodontic leveling and alignment of the delayed premolar. The long follow-up indicates that delayed tooth buds may develop completely and normally.     

Effect of surface treatment of a glass-infiltrated alumina ceramic on the microtensile bond strength

This study evaluated the microtensile bond strength of a resin composite to a ceramic submitted to three surface treatments. Twelve glass-infiltrated alumina ceramic blocks (In-Ceram Alumina, VITA) and twelve resin composite blocks (Clearfil APX, Kuraray) with dimensions of 6mm x 6mm x 5mm were made. The surface of the ceramic was wet-grounded with # 600, 800 and 1200-grid sandpaper, and the blocks were divided in three groups: Group 1 - sandblasting with aluminum oxide - particles 110mm (Micro-Etcher, Danville); Group 2 - Rocatec System (ESPE): Tribochemical silica coating (Rocatec pre-powder + Rocatec-Plus powder + Rocatec-Sil); Group 3 - CoJet System (3M/ESPE): silica coating (silica oxide + ESPE-Sil). The ceramic blocks were cemented to the resin composite blocks with Panavia F (Kuraray Co), following the manufacturer's instructions, under load of 750g for 10min. The samples were stored (distilled water / 7 days / 37O C) and sectioned in two axis, x and y, with diamond disk under cooling in order to obtain samples (S) with 0.6 ± 0.1mm2 of adhesive area (n=36). The S were attached in adapted device for the microtensile test that was performed at an universal testing machine (EMIC), at a speed of 1mm/min. The results (MPa) were submitted to ANOVA and Tukey's test (p<0.05): G1 - 15.36; G2 - 30.98; G3 - 31.25. Groups 2 (Rocatec) and 3 (CoJet) presented larger bond strength than group 1. There was no statistical difference between group 2 and group 3.