Outbreak of Salmonella Newport linked to imported frozen cooked crayfish in dill brine,Sweden, July to November 2019

In autumn 2019, the Public Health Agency of Sweden identified a cluster of Salmonella Newport cases by whole genome sequencing (WGS). Cases’ distribution in place and time indicated a nation-wide ongoing outbreak. An investigation was initiated to identify the source and prevent further cases. We conducted a case–case study based on notified salmonellosis cases and a Salmonella trawling questionnaire, comparing 20 outbreak cases and 139 control cases. Food exposures were compared by adjusted odds ratios (aOR) with 95% confidence interval (CI) using logistic regression. Implicated foods were sampled. Outbreak cases were more likely to have consumed crayfish (aOR = 26; 95% CI: 6.3–105). One specific brand of imported frozen, pre-cooked whole crayfish in dill brine was identified as the source. Salmonella Newport was later detected in different batches from retail and in one sample from border control. Isolates from food samples clustered with the human outbreak strain by WGS. Although the retailer made a complete recall, two more cases were identified long afterwards. This investigation demonstrated the successful use of a case–case study and targeted microbiological testing to identify the source. The immediate action taken by the retailer was important to confirm the source and stop the outbreak.     

Valorization of Grape Pomace and Berries as a New and Sustainable Dietary Supplement: Development,Characterization, and Antioxidant Activity Testing

Grape pomace and berries represent natural sources of phytochemicals that can increase the quality of life of consumers by contributing to the prevention of chronic diseases; thus, the development of a dietary supplement was necessary. The raw material (r.m.) used for the development of the dietary supplement consisted of dried and powdered bilberries (Vaccinium myrtillus L.), red currants (Ribes rubrum L.), and red fermented pomaces (Vitis vinifera L.) from Feteasca Neagra and Cabernet Sauvignon cultivars. The particle size distribution, powder flow, total phenolic content (TPC), HPLC-DAD phenolic profile assessment, and radical scavenging assay (RSA) were employed for the analysis of the raw material. After encapsulation, the average mass and uniformity of mass, the disintegration, and the uniformity of content for the obtained capsules were performed to obtain a high-quality dietary supplement. All the assays performed complied to the compendial requirements and the TPC was determined at 9.07 ± 0.25 mg gallic acid equivalents/g r.m. and RSA at 48.32 ± 0.74%. The highest quantities of phenolic compounds determined were 333.7 ± 0.50 µg/g r.m. for chlorogenic acid, followed by rutin, ferulic acid, and (+)-catechin with 198.9 ± 1.60 µg/g r.m., 179.8 ± 0.90 µg/g r.m. and 118.7 ± 0.75 µg/g r.m., respectively. The results of this study can be used for the manufacturing and assessing of pilot scale-up capsule batches and thinking of quality assurance, we recommend that the industrial batch extracts should be standardized in polyphenols, and the manufacturing process should be validated.     

Soluble receptor for advanced glycation end products (sRAGE) and endogenous secretory RAGE (esRAGE) in amniotic fluid: modulation by infection and inflammation

Abstract Objective: The receptor for advanced glycation end products (RAGE) has been proposed to participate in the innate and adaptive immune responses. RAGE can induce production of pro-inflammatory cytokines and chemokines, as well as neutrophil chemotaxis in a manner that may be suppressed or stimulated by soluble, truncated forms of RAGE including the soluble form of RAGE (sRAGE) and endogenous secretory RAGE (esRAGE). The objective of this study was to determine whether intra-amniotic infection/inflammation (IAI) is associated with changes in the amniotic fluid concentration of sRAGE and esRAGE. Study design: Amniotic fluid (AF) was retrieved from patients in the following groups: 1) mid-trimester (14-18 weeks of gestation; n=68); 2) term not in labor (n=24); 3) term in labor (n=51); 4) preterm labor and intact membranes (n=124); and 5) preterm PROM (n=80). Intra-amniotic infection and inflammation were defined as the presence of a positive amniotic fluid culture for microorganisms and an AF interleukin-6 concentration >/=2.6 ng/mL, respectively. The AF concentration of sRAGE and esRAGE were determined using specific and sensitive ELISAs which measured total immunoreactive sRAGE and esRAGE, respectively. Patients were matched for gestational age at amniocentesis to compare the AF concentration of sRAGE and esRAGE in patients with and without IAI. Non-parametric statistics were used for analysis and a P<0.05 was considered significant. Results: 1) Patients at term not in labor had higher median AF concentrations of sRAGE and esRAGE than those in the mid-trimester (P<0.001 for both comparisons) and those at term in labor (P=0.03 and P=0.04, respectively); 2) patients with preterm labor and intact membranes with intra-amniotic infection/inflammation (IAI) had higher median AF concentrations of sRAGE and esRAGE than those without IAI (P=0.02 and P=0.005, respectively); 3) similarly, patients with preterm PROM with IAI had higher median AF concentrations of sRAGE and esRAGE than those without IAI (P=0.03 and P=0.02, respectively). Conclusion: Intra-amniotic infection/inflammation is associated with increased amniotic fluid concentrations of sRAGE and esRAGE. Changes in the amniotic fluid concentration of sRAGE and esRAGE may represent part of the immune response to intra-amniotic infection/inflammation.     

Sleep architecture based on sleep depth and propensity: patterns in different demographics and sleep disorders and association with health outcomes

Study ObjectivesConventional metrics of sleep quantity/depth have serious shortcomings. Odds-Ratio-Product (ORP) is a continuous metric of sleep depth ranging from 0 (very deep sleep) to 2.5 (full-wakefulness). We describe an ORP-based approach that provides information on sleep disorders not apparent from traditional metrics.MethodsWe analyzed records from the Sleep-Heart-Health-Study and a study of performance deficit following sleep deprivation. ORP of all 30-second epochs in each PSG and percent of epochs in each decile of ORPs range were calculated. Percentage of epochs in deep sleep (ORP < 0.50) and in full-wakefulness (ORP > 2.25) were each assigned a rank, 1–3, representing first and second digits, respectively, of nine distinct types (“1,1”, “1,2” … ”3,3”). Prevalence of each type in clinical groups and their associations with demographics, sleepiness (Epworth-Sleepiness-Scale, ESS) and quality of life (QOL; Short-Form-Health-Survey-36) were determined.ResultsThree types (“1,1”, “1,2”, “1,3”) were prevalent in OSA and were associated with reduced QOL. Two (“1,3” and “2,3”) were prevalent in insomnia with short-sleep-duration (insomnia-SSD), but only “1,3” was associated with poor sleep depth and reduced QOL, suggesting two phenotypes in insomnia-SSD. ESS was high in types “1,1” and “1,2”, and low in “1,3” and “2,3”. Prevalence of some types increased with age while in others it decreased. Other types were either rare (“1,1” and “3,3”) or high (“2,2”) at all ages.ConclusionsThe proposed ORP histogram offers specific and unique information on the underlying neurophysiological characteristics of sleep disorders not captured by routine metrics, with potential of advancing diagnosis and management of these disorders.     

3D Printed Customized Facemask for Maxillary Protraction in the Early Treatment of a Class III Malocclusion: Proof-of-Concept Clinical Case

In order to improve fit and comfort, a maxillary protraction facemask customized to the patient’s anatomy was produced by means of 3D face scanning, digital design and additive manufacturing. An 8-year-old patient in need of early treatment for the Class III malocclusion received a rapid palatal expander and a Petit-type facemask, whose components were digitally designed on a 3D scan of the patient’s face. For face scanning, the iPad Pro 2018 tablet (Apple, Cupertino, CA, USA) with the Bellus3D DentalPro application (Bellus3D, Campbell, CA, USA) was used. Facemask components were modelled with 3D Blender software. The rests were 3D printed in BioMed Clear biocompatible resin (Formlabs, Somerville, MA, USA), and the bar in stainless steel. For greater comfort, the internal surface of the rests was lined with a polymer gel pad (Silipos, Niagara Falls, NY, USA). The manufacturing procedure of the customized facemask is patented. The patient wore the facemask at night for a period of 9 months. The patient’s experience was evaluated with a questionnaire at 1 week, 3, 6, and 10 months of treatment. The customized facemask was well accepted by the patient and obtained the expected treatment outcome. Furthermore, 3D face scanning, 3D modelling and 3D printing allow for the manufacturing of customized facemasks with improved fit and comfort, favoring patient compliance and treatment success.     

Reactive vaccination as control strategy for an outbreak of invasive meningococcal disease caused by Neisseria meningitidis C:P1.5-1,10-8:F3-6:ST-11(cc11), Bergamo province,Italy, December 2019 to January 2020

In Italy, serogroup C meningococci of the clonal complex cc11 (MenC/cc11) have caused several outbreaks of invasive meningococcal disease (IMD) during the past 20 years. Between December 2019 and January 2020, an outbreak of six cases of IMD infected with MenC/cc11 was identified in a limited area in the northern part of Italy. All cases presented a severe clinical picture, and two of them were fatal. This report is focused on the microbiological and molecular analysis of meningococcal isolates with the aim to reconstruct the chain of transmission. It further presents the vaccination strategy adopted to control the outbreak. The phylogenetic evaluation demonstrated the close genetic proximity between the strain involved in this outbreak and a strain responsible for a larger epidemic that had occurred in 2015 and 2016 in the Tuscany Region. The rapid identification and characterisation of IMD cases and an extensive vaccination campaign contributed to the successful control of this outbreak caused by a hyperinvasive meningococcal strain.