Developing dental education in primary care: the student perspective

A pilot outreach course in restorative dentistry based in community clinics began in 2001. As part of the evaluation, 48 fourth year students completed a questionnaire about their opinions of the new course, and about restorative dentistry clinics in the dental hospital. Time management was the most frequently mentioned gain from outreach. In relation to the dental school, students most often saw the specialised teaching staff as a gain. Outreach was equally or more important for students' confidence in clinical diagnosis of dental caries, treatment planning, direct restorations, communicating with patients, and managing patients, time, and resources. The dental hospital was equally or more important for their confidence in the diagnosis of periodontal disease, root planing, crowns, bridges, dentures, and communicating effectively with laboratory staff. Patients in outreach were seen as different from those at the dental hospital because they were unselected, and had different treatment needs. Meeting course requirements was the most frequent concern about outreach. In relation to the dental hospital, students were most often concerned about the quality of teaching and support available. Outreach and the dental hospital provided complementary experiences and the new course met its educational objectives.     

Management of spontaneous enophthalmos due to silent sinus syndrome: a case report

Silent sinus syndrome (SSS) is a rare disease exhibiting unilateral enophthalmos and hypoglobus. A 26-year-old white female presented with right side enophthalmos and hypoglobus. There was no history of previous trauma or maxillary sinus diseases. A CT scan showed an opacified right maxillary antrum with decreased volume and downward bowing of the right orbital floor. From clinical and radiological findings the diagnosis SSS was made. Biopsies were collected from the maxillary sinus for the exclusion of malignancy. Two months later orbital floor reconstruction was carried out. Before antrostomy of the affected maxillary sinus, a relative enophthalmos of 4mm was determined. Five days after antrostomy the value reduced to 2.3mm. During the following 2 months the enophthalmos remained constant. At the end of the operation for orbital floor reconstruction it was 0.1mm. Five days after surgery the relative enophthalmos increased to 0.8mm. The value remained constant during the following 3 months. Initial antrostomy of the affected maxillary sinus may lead to a relevant, spontaneous reduction of enophthalmos. After a minimum period of 2 months a re-evaluation should be made, if a reconstruction of the orbital floor is still necessary for the correction of the globe position.     

Experience with dental pain and fear of dental pain

Anxious people tend to overestimate the intensity of aversive events such as fear and pain. When an aversive event has been experienced personally, prediction is based on experience and is possibly less subject to bias due to anxiety. Therefore, it was hypothesized that subjects will overestimate fear of specific dental pains relative to subjects who experienced the pain or procedure personally. Samples of highly anxious dental patients (n=48), patients waiting for periodontal treatment (n=56), and psychology freshmen (n=262) completed a measure of dental anxiety and the Fear of Dental Pain (FDP) questionnaire. All FDP items were extended with the question whether the subject ever experienced the pain personally (yes or no). Less fear was reported when the pain had been experienced personally, with the exception of the sample of highly anxious dental patients. The results suggest that fear of dental pain is a highly important covariate in dental pain research.     

Ectodermal dysplasia--an unusual dental presentation

Ectodermal dysplasia (ED) is a rare group of disorders affecting the hair, teeth, nails and sweat glands to a variable degree. There is a wide range of clinical presentation of ED. Missing teeth or abnormal tooth form may be the first indicator of the presence of the disorder. There is typically hypodontia with microdontia. We present an unusual case of ED with severe hypodontia and macrodontia affecting all first permanent molar teeth. We also consider the classification and presentation of this disorder.     

Vascular endothelial growth factor in gingival tissues and crevicular fluids of diabetic and healthy periodontal patients

BACKGROUND: Periodontal disease is one of the major oral problems encountered in patients with diabetes mellitus (DM). Vascular changes, neutrophil dysfunction, altered collagen synthesis, and genetic predisposition observed in DM may contribute to periodontitis; and the vascular alterations observed in such patients may depend on vascular endothelial growth factor (VEGF) actions. Few reports are available about the mechanism of neovascularization and the angiogenic factors that contribute to the periodontal pathology and the role of VEGF in periodontal diseases. The aim of this study is to compare VEGF expression in healthy and periodontally diseased tissues with gingival crevice fluid (GCF) of healthy persons and diabetic patients. METHODS: Gingival tissue and GCF samples were collected from sites of periodontitis in 10 healthy subjects and in 10 type 2 diabetic patients, and from the sites of healthy gingiva within the same groups. Therefore, each patient became his/her own control. Additionally, 10 people without any systemic or periodontal diseases were enrolled, forming a negative control group. Thus, a total of 50 tissue and 50 GCF samples were provided. RESULTS: No VEGF staining was observed in the negative control group or in the systemically healthy people's healthy tissue samples, whereas four samples of diabetic patients showed positive staining (P < 0.05). However, VEGF was revealed in two tissue samples of periodontal sites of systemically healthy people and in six samples of the diabetic patients (P > 0.05). In all test groups, GCF VEGF levels were higher in periodontal sites (P < 0.05) than in healthy sites. CONCLUSION: The results of this study showed that VEGF is increased in all periodontal tissues of both groups and in the healthy sites of diabetic patients. Additionally, GCF VEGF values increased in periodontal sites of all test groups.     

Dentists' molar restoration choices and longevity: a web-based survey

STATEMENT OF PROBLEM: The increasing trend toward esthetics has led to controversy as to the longevity of esthetic restorations and the wisdom of having traditional restorations replaced for esthetic reasons. With the assumption that the way dentists treat their own teeth may be a good indication of the accumulated wisdom of the profession, knowledge of dentists' own restorative choices may provide guidance in selecting the most appropriate restorations. PURPOSE: The purpose of this article was to determine restorative choices of dentists for personal molars and estimate restoration longevity. MATERIAL AND METHODS: Information about dentists' molars was obtained from a Web-based survey designed to receive dentists' demographic data and charting of 8 molar teeth with estimated longevity. Approximately 12,000 e-mails asking to access the website were sent to dentists' addresses randomly selected from a commercial database. Nonrespondents received 1 reminder. The responses were statistically analyzed with a chi-square analysis (alpha=.05). RESULTS: Seven hundred fifty-seven valid replies provided information for 6,034 teeth (22% unrestored, 75% restored, 2% missing). Restorations reported included amalgam (36%), gold inlay/onlay (13%), complete veneer crown (CVC) (10%), metal-ceramic crown (MCC) (8%), and composite (7%). Other esthetic options accounted for less than 3%. Restorations with more than 20 years longevity included amalgam restorations (58%), gold inlays/onlays (48%) and crowns (23%). Fifty-six percent of esthetic restorations and 5% of amalgams were placed in the last 5 years. The following restorations were placed in the last year (n=186): 38% esthetic, 29% crowns (18% MCC; 11% CVC), and 17% gold inlay/onlay or amalgam. Significant differences (P<.001) were identified for dentist's gender, year of graduation and practice location. CONCLUSIONS: Most dentists have not replaced traditional metallic restorations with esthetic alternatives. Dentists still choose nonesthetic options for significant numbers of their own restorations.     

Axis inhibition protein 2 (AXIN2) polymorphisms and tooth agenesis

Tooth agenesis is a common congenital disorder that affects almost 20% of the world's population. A number of different genes have been shown to be associated with cases of tooth agenesis including AXIN2, IRF6, FGFR1, MSX1, PAX9, and TGFA. Of particular interest is AXIN2, which was linked to two families segregating oligodontia and colorectal cancer. We studied two collections of families affected with tooth agenesis and tested them for association with AXIN2. Significant association between tooth agenesis and AXIN2 was found (p = 0.02) in cases with at least one missing incisor. Our work further supports a role of AXIN2 in human tooth agenesis and for the first time suggests AXIN2 is involved in sporadic forms of common incisor agenesis. Future studies should identify which specific tooth agenesis sub-phenotypes are consequence of AXIN2 genetic variations. A sub-set of these cases could have an increased susceptibility for colon cancer or other types of tumours and this knowledge would have significant clinical implications.     

Biomechanical evaluation of plating techniques for fixing mandibular angle fractures: the introduction of a new 3D plate approach

Purpose

The aim of this study was to comparatively evaluate the use of a three-dimensional (3D) square-shaped plate for the treatment of mandibular angle fractures.

Materials and methods

Synthetic mandible replicas were used to evaluate the effectiveness of the 3D square plate along with three other mandibular angle plating techniques. The plating techniques consisted of: (1) a 3D miniplate (2?×?2 holes, square, 2 mm); (2) a 3D miniplate (6?×?2 holes, curved, 2 mm); (3) two miniplates (four holes, straight, 2 mm and 1.6 mm); and (4) one single miniplate (four holes, straight, 2 mm). Each group was subjected to incisal and homolateral molar region loading by a tensile materials testing machine (Monsanto Tensometer 20). Load stiffness values and peak measurements of the fracture gap distraction at the superior aspect of the mandible were measured. The mean values (±standard deviation) were derived and compared using one-way analysis of variance, with statistical significance set at p?<?0.05.

Results

For homolateral molar loading, statistically significant differences existed within groups (p?<?0.05). For incisal edge loading, no statistically significant differences were found for stiffness among the fixation methods tested. Gap distraction at the superior aspect of the mandible was limited for three of the groups tested.

Conclusion

Under the conditions tested, the 3D square plate system provided the most favorable mechanical behavior.     

Comparison of chemically and pharmaceutically modified titanium and zirconia implant surfaces in dentistry: a study in sheep

Advanced surface modifications and materials were tested on the same implant geometry. Six types of dental implants were tested for osseointegration after 2, 4 and 8 weeks in a sheep pelvis model. Four titanium implant types were treated with newly developed surface modifications, of which two were chemically and two were pharmacologically modified. One implant was made of zirconia. A sandblasted and acid-etched titanium surface was used as reference. The chemically modified implants were plasma-anodized or coated with calcium phosphate. The pharmacological coatings contained either bisphosphonate or collagen type I with chondroitin sulphate. The implants were evaluated using macroscopic, radiographic and histomorphometric methods. All implants were well osseointegrated at the time of death. All titanium implants had similar bone implant contact (BIC) at 2 weeks (57-61%); only zirconia was better (77%). The main BIC increase was between 2 and 4 weeks. The pharmacologically coated implants (78-79%) and the calcium phosphate coating (83%) showed similar results compared with the reference implant (80%) at 8 weeks. There were no significant differences in BIC. Compared with previous studies the results of all implants were comparatively good.     

Load-bearing capacity and failure types of anterior zirconia crowns veneered with overpressing and layering techniques

Objectives

The aim of this study was to test whether the load bearing capacity of anterior zirconia crowns veneered with overpressed or layered, is similar and to evaluate the failure types.

Methods

Standardized zirconia frameworks were fabricated and randomly divided into 8 groups (N = 120, n = 15 per test group). Four groups were veneered with one of the layered veneering porcelains: Zirox, GC Initial ZR, VITA VM9 or IPS e.max Ceram and the other four groups were veneered with overpressed veneering porcelains: PressX Zr, GC Initial LF, VITA PM9 or IPS e.max ZirPress. The crowns were cemented on their corresponding CoCr abutment and the specimens were loaded at an angle of 45° in a Universal Testing Machine to determine the fracture load. Data were analyzed using one-way and two-way ANOVA, followed by a post hoc Scheffé test, t-test and Weibull analysis (alpha = 0.05).

Results

Within three manufacturers of veneering porcelain, fracture load values were not statistically significant between overpressed and layered porcelain systems. Within one manufacturer of veneering porcelain, the overpressed crowns (IPS e.max ZirPress: 1519 ± 334 N) demonstrated significantly higher (p < 0.05) fracture load than that of the layered one (IPS e.max Ceram: 894 ± 160 N). Except with IPS e.max ZirPress, where exclusively only chipping of the veneering porcelain was observed, all other porcelain systems showed predominantly framework fractures together with fracture of the veneering porcelain.

Conclusion

Overpressed veneering porcelains for zirconia frameworks exhibited similar or better fracture load compared with layered ones.