Oral Cancer: Risk Factors and Molecular Pathogenesis

Introduction  

Oral cancer is one of the most common cancers and it constitutes a major health problem particularly in developing countries. It is one of the leading causes of death. Tobacco and alcohol consumption appears to be the major determinants of oral cancer.     

A synopsis of head and neck oncology and related papers published in the British Journal of Oral and Maxillofacial Surgery in 2009/10

This review summarises all head and neck oncology and related papers published in the British Journal of Oral and Maxillofacial Surgery (BJOMS) during the period 2009-2010. A similar review, covering the years 2007-2008 was published in the Journal in 2009 and was well received by readers, as evidenced by the high number of downloads from the BJOMS website. In this article, we include all head and neck oncology-related articles published in the print version of the journal during 2009/10 and concentrate on summarising the full length article papers. Compared to the previous 2-year period, there has been a 25% increase in number of articles published in this sub-specialty.     

The critical barrier to progress in dentine bonding with the etch-and-rinse technique

Objectives

The lack of durability in resin-dentine bonds led to the use of chlorhexidine as MMP-inhibitor to prevent the degradation of hybrid layers. Biomimetic remineralisation is a concept-proven approach in preventing the degradation of resin-dentine bonds. The purpose of this study is to examine the integrity of aged resin-dentine interfaces created with a nanofiller-containing etch-and-rinse adhesive after the application of these two approaches.

Methods

The more established MMP-inhibition approach was examined using a parallel in vivo and in vitro ageing design to facilitate comparison with the biomimetic remineralisation approach using an in vitro ageing design. Specimens bonded without chlorhexidine exhibited extensive degradation of the hybrid layer after 12 months of in vivo ageing.

Results

Dissolution of nanofillers could be seen within a water-rich zone within the adhesive layer. Although specimens bonded with chlorhexidine exhibited intact hybrid layers, water-rich regions remained in those hybrid layers and degradation of nanofillers occurred within the adhesive layer. Specimens subjected to in vitro biomimetic remineralisation followed by in vitro ageing demonstrated intrafibrillar collagen remineralisation within hybrid layers and deposition of mineral nanocrystals in nanovoids within the adhesive.

Conclusions

The impact was realized by understanding the lack of an inherent mechanism to remove water from resin-dentine interfaces as the critical barrier to progress in bonding with the etch-and-rinse technique. The experimental biomimetic remineralisation strategy offers a creative solution for incorporating a progressive hydration mechanism to achieve this goal, which warrants its translation into a clinically applicable technique.     

High irradiance curing and anomalies of exposure reciprocity law in resin-based materials

Objectives

The aim of this work was to investigate the effect of high irradiance curing on resultant degree of conversion of ‘flowable’ resin composites and their counterpart higher viscosity paste materials.

Methods

Five commercial flowable materials (Venus; Heraeus Kulzer, Synergy D6; Coltene, Premise; Kerr, Grandio; Voco and Gradia; GC Corp) and their counterpart higher viscosity restorative versions were tested. Specimens were cured with a halogen Swiss Master Light (EMS, Switzerland) using five different curing protocols with similar radiant exposure (18 J/cm²): 400 mW/cm² for 45 s, 900 mW/cm² for 20 s, 1500 mW/cm² for 12 s, 2000 mW/cm² for 9 s and 3000 mW/cm² for 6 s. Degree of conversion (DC) was measured in real time by Fourier transform near infrared spectroscopy (FT-NIRS).

Results

Three- and subsequent two way ANOVA testing revealed significant differences (p ≤ 0.02) with respect to “composite type” and “cure protocol” for DC for all 5 product comparisons. Supplementary one-way ANOVA also revealed significant differences between curing protocols (p < 0.05). The majority of higher viscosity resin composite paste materials exhibited similar DC regardless of curing protocol. However, a significant decrease in DC for specimens cured at 3000 mW/cm² for 6 s compared with 400 mW/cm² for 45 s was observed for the flowable materials, Grandio (41 ± 0.36 and 62 ± 1.15%, respectively) and Venus (44 ± 0.44 and 67 ± 0.44%, respectively). Conversely, other flowable materials exhibited little or no significant differences between curing modes. Generally, a higher degree of conversion was observed for flowables compared with their more viscous counterpart, except at high irradiance for those materials where a reciprocal relationship with exposure time was not observed.

Conclusions

The validity of exposure reciprocity law and final degree of conversion depends on several factors, amongst which resin viscosity and filler content were important. Practitioners should be aware of the importance of resin composite constituents and irradiation protocols. Information on material composition and appropriate radiation sources by manufacturers may assist practitioners with the selection of appropriate curing protocols for specific material/light curing unit combinations with the aim of reducing the incidence of under-cured restorations and the clinical impact thereof.     

Preservation of an injured vital tooth using ultrasonic device and mineral trioxide aggregate

The purpose of this case report is to present a root fracture repair procedure for non devitalized injured tooth. One injured, non-endodontically treated maxillary anterior tooth in which an incomplete vertical root fracture involving only the buccal side was suspected, underwent an exploratory flap to visualize the pattern of bone loss and assess the type of root fracture. The pre-operative diagnosis was confirmed. A groove following fracture line was prepared using retro-tips driven by an ultrasonic device and sealed with Mineral Trioxide Aggregate (MTA), following filling of the bone defect with Calcium Sulphate. At 24 months follow up the case showed clinical and radiographic success. The present surgical approach showed preservation of function and vitality of tooth with a shallow incomplete vertical root fracture.     

Color stability of composites: effect of immersion media

Coloring in drinks decreases the color stability of composite restorations, reducing their longevity. The purpose of this in vitro study was to evaluate the effect of immersion media on color stability of seven different composite resins (Solidex - Shofu, Resilab-Wilcos, Signum - Heraeus, Epricord - Tokuyama, Adoro - Ivoclar Vivadent, Admira - Voco and Sinfony - 3MESPE). Seven resin-based composite specimens were prepared using a cylindrical teflon mold 2 mm thick and 10 mm in diameter Fifteen specimens of each resin were light-cured according to manufacturers' instructions and randomized into 3 groups (n= 5) according to immersion media: coffee, cola beverage and water A digital spectrophotometer Easy Shade (VITA) was used to evaluate the color changes at baseline and 7 days after immersion in each solution. Specimens were stored in the different staining media for 24 h/day during one week. The color differences were analyzed by two-way ANOVA and Tukey 's test (p< 0.05). Color change was observed after one week of immersion and there were statistical differences in staining, composite and interaction factors. The least staining was observed in Admira (deltaE= 3.934+/-0.814) and Resilab (deltaE= 3.993+/-0.735), followed by Adoro (deltaE= 4.044+/-1.001), Epri-cord (deltaE= 4.049+/-1.234), Signum (deltaE= 4.260+/-1.785), Solidex (deltaE=5,122+/-0.534) and Sinfony (deltaE=5.126+/-0.838). All of the composites tested except Adoro were susceptible to staining by substances present in coffee and cola, when stored in beverage for seven days. The lowest deltaE means were obtained with Admira.     

Preliminary clinical reports of a novel night-guard tooth bleaching technique modified by casein phosphopeptide-amorphous calcium phosphate (CCP-ACP)

Although supervised night-guard bleaching has proved successful for whitening teeth, both mineral loss and tooth sensitivity are still common problems. The present study introduces a novel remineralizer as well as describes the utilization of a possibly low sensitivity supervised night-guard vital tooth bleaching technique. A 22% carbamide peroxide gel was mixed with the casein phosphopeptide-amorphous calcium phosphate-containing MI Paste. The peroxide/MI Paste mixture was prepared with 1 ml of each material until obtaining a homogeneous paste. Five patients were instructed to follow a home bleaching protocol for 3 weeks. The outcome was assessed visually with a Vitapan scale. All subjects presented reduction of at least two Vitapan scale units after bleaching and no sensitivity was reported. The concomitant use of MI Paste and peroxide might not affect the gel effectiveness and still reduce hypersensitivity levels.