Effect of Classroom Illuminance on the Development and Progression of Myopia in School Children

PurposeTo evaluate the effect of classroom illuminance on the development and progression of myopia in elementary school children.MethodsThe daylight factor, a ratio of inside and outside illuminance, was obtained in 50 elementary schools. The first-grade students in the school with the lowest daylight (LD) factor (LD school, 145 subjects; 0.51%) and with the highest daylight (HD) factor (HD school, 147 subjects; 13.35%) were selected. A survey was conducted to evaluate parental myopia, the amount of near-work and outdoor activities. The refractive error and axial length (AL) were measured at initial and after 6 months. The spherical equivalent, AL, and the survey results were compared between the two schools. The mean AL of the emmetropic children was obtained, and all subjects were divided into two groups, more and less than mean AL. Changes in refractive errors and AL were also compared according to AL.ResultsThe amount of change in spherical equivalent and AL after 6 months were not different between the two schools. Initial prevalence of myopia was high in the HD school. However, it became similar between the two schools after 6 months. The mean AL of 155 emmetropic children was 22.7 ± 0.63 mm. In the 185 children with AL ≥22.7 mm, there was no difference in the AL change between the two schools. However, the change in AL in 107 children with AL <22.7 mm was significantly larger in the LD school (0.19 mm) than that in the HD school (0.15 mm, p = 0.049). Parental myopia, near-work and outdoor activities were not different between the two schools.ConclusionsHigh classroom illuminance during the day reduced axial elongation in eyes of children with a shorter AL. Increase in classroom light level by permitting more sunlight can be a protective measure against the development of myopia.     

Acute Tubular Necrosis Associated with Angiotensin Receptor-neprilysin Inhibitor

Sacubitril/valsartan, an angiotensin receptor-neprilysin inhibitor (ARNI), significantly reduces mortality and morbidity in patients with chronic heart failure with a reduced ejection fraction (HFrEF). However, a considerable number of patients treated with sacubitril/valsartan experience hypotension, oliguria, progressive azotemia, and renal failure as adverse events. These issues have been linked to significant gaps in the usage and dosing of guideline-directed medical therapy with ARNI in patients with HFrEF. We herein report a relevant case of pathologically proven acute tubular necrosis after the first dose of sacubitril/valsartan, highlighting the importance of optimizing the medical therapy in an outpatient with HFrEF.     

Dieckol Inhibits the Effects of Particulate Matter 10 on Sebocytes,Outer Root Sheath Cells,and Cutibacterium Acnes-Pretreated Mice

BackgroundParticulate matter (PM) is an air pollutant that can impair the human skin. Antioxidants have been tested to improve PM-induced skin inflammation.ObjectiveIn this study, we investigated the effects of dieckol on PM-induced inflammation on cultured human sebocytes, outer root sheath (ORS) cells, and mice pretreated with Cutibacterium acnes.MethodsWe cultured and treated the sebocytes and ORS cells with 5 µM of dieckol and 100 µg/ml of PM10 for 24 h. The C. acnes-pretreated mice received 5 µM of dieckol and 100 µg/ml of PM10. We measured cell viability using MTT assay. Real-time PCR and measurement of reactive oxygen species (ROS) and sebum production analyzed the effects.ResultsDieckol inhibited the upregulation of the gene expression of the inflammatory cytokines, matrix metalloproteinase (MMP), aryl hydrocarbon receptor, and nuclear factor kappa-light-chain-enhancer of activated B cells by PM10 in the cultured sebocytes and ORS cells and inhibited an increase in ROS production by PM10 in the cultured sebocytes. In addition, dieckol decreased the inflammatory cytokines, MMP, and sebum production in C. acnes-pretreated mice.ConclusionDieckol effectively reduced the expression of inflammatory biomarkers and the production of sebum in cultured sebocytes, ORS cells, and C. acnes-pretreated mice.     

Antimicrobial second skin using copper nanomesh

The functional support and advancement of our body while preserving inherent naturalness is one of the ultimate goals of bioengineering. Skin protection against infectious pathogens is an application that requires common and long-term wear without discomfort or distortion of the skin functions. However, no antimicrobial method has been introduced to prevent cross-infection while preserving intrinsic skin conditions. Here, we propose an antimicrobial skin protection platform copper nanomesh, which prevents cross-infectionmorphology, temperature change rate, and skin humidity. Copper nanomesh exhibited an inactivation rate of 99.99% for Escherichia coli bacteria and influenza virus A within 1 and 10 min, respectively. The thin and porous nanomesh allows for conformal coating on the fingertips, without significant interference with the rate of skin temperature change and humidity. Efficient cross-infection prevention and thermal transfer of copper nanomesh were demonstrated using direct on-hand experiments.

The functional support and advancement of our body while preserving the inherent naturalness is one of the ultimate goals of bioengineering (1–4). A functional layer is placed on the skin to complement the intrinsic biological and interactive functions (5, 6) and to add functions that do not yet exist (7–9). During use, the second skin layer should completely exploit its function and underlay skin functions without deforming the skin or interfering with the skin’s external interaction. Materials and structures need to be conformal and mechanically similar to the skin to minimize the distortion of natural sensations and movements. In addition, the air and heat transfer on the skin must be unimpeded to obtain a natural and comfortable wear fit (10).Body protection that requires common and long-term wear is an application in which both functionality and naturalness are important. As the outermost layer connecting our body to the environment, the skin is exposed to physical damage, hazardous chemicals, and infectious pathogens (11, 12). Therefore, we add a protective layer on the skin that blocks or filters out external contaminants. This entails the isolation and accumulation of biochemical compounds, which can lead to self-contamination and the subsequent cross-contamination/infection by interacting with other objects. In contrast to chemical contamination, which is not self-reproductive, the biological contamination of infectious microbes, such as severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), is a considerable issue to be addressed.By containing an antimicrobial material on the surface of the skin protective layer, cross-infection can be prevented in the long term. Unlike temporary rinsing or disinfection, the use of antibacterial or antiviral substances such as chemical or natural disinfectants and metal nanomaterials inhibits the growth of microorganisms on the surface (13–17). These materials are embedded in a complete covering polymer layer, such as gloves (18, 19), to isolate and protect both the inner and outer surfaces from the infection. To add breathability to the textile especially for the mask (13, 20, 21), many antibacterial fibers have been developed based on these materials. Moreover, various skin-attachable platforms with antimicrobial properties have been developed for convenient usage in daily lives. Antimicrobial nanofibers with conformal attachment to the skin have been developed for drug delivery, wound healing (22, 23), and electrophysiology (24, 25). In addition, stretchable and antibacterial hydrogels have been developed to allow more natural skin movement in wound-healing applications (26–28).However, there has been no practical skin protective solution to prevent cross-infection while preserving intrinsic skin conditions such as surface morphology, thermal transfer, and skin humidity. The thickening of the additional skin layer frequently results in a significant modification of the surface morphology, heat transfer, and the corresponding sensation. Thin layers have limited performance in terms of antimicrobial duration and speed. The skin coverage of polymer or hydrogel film blocks the transfer of air, moisture, and heat. In addition, the antimicrobial performance is focused on the skin side rather than the external side that affects cross-infection. Voids owing to the stiffness of the film or fiber and morphological differences compared to the skin further limit conformality, heat transfer, and water/air permeability (29).Here, we propose an antimicrobial skin protection platform copper nanomesh, which prevents cross-infection while minimizing modification of intrinsic skin properties such as interfacial morphology, temperature change rate, and skin humidity. The thin thickness and porous structure of the nanomesh allow conformal attachment to the fingertips, regardless of the mechanical and structural variations of the fingerprints, nails, and interfaces. To impart antimicrobial properties, copper, one of the most well-known antimicrobial (nano)materials (30–33), was coated with maintaining the nanomesh structure (copper nanomesh, from here onward). The measured inactivation rates of copper nanomesh against Escherichia coli bacteria and influenza virus A (H1N1) were 99.99% within 1 min and 10 min, respectively. It was found that the nanomesh structure contributed to the acceleration of bacterial inactivation compared to the copper film. Furthermore, it exhibited high biocompatibility with the skin cells and stable antibacterial performance even after long-term use (more than 6 h), including water immersion (more than 1 h).In addition, we investigated the naturalness of the copper nanomesh compared to that of the copper film and conventional gloves. As confirmed using the artificial skin and fingerprint recognition, the proposed copper nanomesh exhibited a higher conformability compared to that of the copper film. The copper nanomesh showed a high hydrophobicity to block external contaminants in solution while having high gas permeability and maintaining the skin humidity in a safe range. Additionally, the insertion of copper nanomesh did not affect the temperature change rate, which is important to maintain the sensation and comfort fit of the skin. Finally, the copper nanomesh was compared to the glove by wearing on our hands and interacting with various real-life objects. Using the proposed copper nanomesh, we successfully achieved an effective prevention of cross-infection and less-hindered thermal recognition of objects.     

Inhibitory effects of the atypical antipsychotic,clozapine, on voltage-dependent K+ channels in rabbit coronary arterial smooth muscle cells

To investigate the adverse effects of clozapine on cardiovascular ion channels, we examined the inhibitory effect of clozapine on voltage-dependent K⁺ (Kv) channels in rabbit coronary arterial smooth muscle cells. Clozapine-induced inhibition of Kv channels occurred in a concentration-dependent manner with an half-inhibitory concentration value of 7.84 ± 4.86 µM and a Hill coefficient of 0.47 ± 0.06. Clozapine did not shift the steady-state activation or inactivation curves, suggesting that it inhibited Kv channels regardless of gating properties. Application of train pulses (1 and 2 Hz) progressively augmented the clozapine-induced inhibition of Kv channels in the presence of the drug. Furthermore, the recovery time constant from inactivation was increased in the presence of clozapine, suggesting that clozapine-induced inhibition of Kv channels is use (state)-dependent. Pretreatment of a Kv1.5 subtype inhibitor decreased the Kv current amplitudes, but additional application of clozapine did not further inhibit the Kv current. Pretreatment with Kv2.1 or Kv7 subtype inhibitors partially blocked the inhibitory effect of clozapine. Based on these results, we conclude that clozapine inhibits arterial Kv channels in a concentration- and use (state)-dependent manner. Kv1.5 is the major subtype involved in clozapine-induced inhibition of Kv channels, and Kv2.1 and Kv7 subtypes are partially involved.     

Phenotype of Asthma-COPD Overlap in COPD and Severe Asthma Cohorts

BackgroundAsthma and chronic obstructive pulmonary disease (COPD) are airway diseases with similar clinical manifestations, despite differences in pathophysiology. Asthma-COPD overlap (ACO) is a condition characterized by overlapping clinical features of both diseases. There have been few reports regarding the prevalence of ACO in COPD and severe asthma cohorts. ACO is heterogeneous; patients can be classified on the basis of phenotype differences. This study was performed to analyze the prevalence of ACO in COPD and severe asthma cohorts. In addition, this study compared baseline characteristics among ACO patients according to phenotype.MethodsPatients with COPD were prospectively enrolled into the Korean COPD subgroup study (KOCOSS) cohort. Patients with severe asthma were prospectively enrolled into the Korean Severe Asthma Registry (KoSAR). ACO was defined in accordance with the updated Spanish criteria. In the COPD cohort, ACO was defined as bronchodilator response (BDR) ≥ 15% and ≥ 400 mL from baseline or blood eosinophil count (BEC) ≥ 300 cells/μL. In the severe asthma cohort, ACO was defined as age ≥ 35 years, smoking ≥ 10 pack-years, and post-bronchodilator forced expiratory volume in 1 s/forced vital capacity < 0.7. Patients with ACO were divided into four groups according to smoking history (threshold: 20 pack-years) and BEC (threshold: 300 cells/μL).ResultsThe prevalence of ACO significantly differed between the COPD and severe asthma cohorts (19.8% [365/1,839] vs. 12.5% [104/832], respectively; P < 0.001). The percentage of patients in each group was as follows: group A (light smoker with high BEC) – 9.1%; group B (light smoker with low BEC) – 3.7%; group C (moderate to heavy smoker with high BEC) – 73.8%; and group D (moderate to heavy smoker with low BEC) – 13.4%. Moderate to heavy smoker with high BEC group was oldest, and showed weak BDR response. Age, sex, BDR, comorbidities, and medications significantly differed among the four groups.ConclusionThe prevalence of ACO differed between COPD and severe asthma cohorts. ACO patients can be classified into four phenotype groups, such that each phenotype exhibits distinct characteristics.     

Three-Point Bending Properties of Hybrid Multi-Materials Using Adhesive Bonding Dependent on Strength Difference between Steel and Aluminum

The mechanical behaviors of two multi-materials, DP590 (steel sheet)–A356 (cast aluminum alloy) and SS330 (steel sheet)–A5052 (aluminum sheet), were studied. A structural adhesive was used for the joining of steel and aluminum at adhesion strengths of 10, 22, and 30 MPa. To demonstrate that the three-point bending properties depend on the difference in strength between steel and aluminum and adhesion strength, optical microscopy (OM), scanning electron microscopy (SEM), and finite-element analysis (FEA) were performed. According to the results of the bending tests on both multi-materials under the same stacking conditions, the flexural stress increased with the improvement in the adhesion strength until interface separation or aluminum fracture. At the same adhesion strength, the DP590 (lower)–A356 (upper) and SS330 (upper)–A5052 (lower) configurations exhibited a tendency to decrease in the sudden stress drop due to aluminum fracture and interface separation. The bending results were analyzed through the FEA and the stress distribution as a function of the stacking and adhesion strength was confirmed.     

The Influence of Face Shields on the Quality of Colonoscopy in the Era of the COVID-19 Pandemic

Background/AimsThe worldwide coronavirus disease 2019 pandemic has led endoscopists to use personal protective equipment (PPE) for infection prevention. This study aimed to investigate whether wearing a face shield as PPE affects the quality of colonoscopy.MethodsWe reviewed the medical records and colonoscopy findings of patients who underwent colonoscopies at Asan Medical Center, Korea from March 10 to May 31, 2020. The colonoscopies in this study were performed by five gastroenterology fellows and four expert endoscopists. We compared colonoscopy quality indicators, such as withdrawal time, adenoma detection rate (ADR), mean number of adenomas per colonoscopy (APC), polypectomy time, and polypectomy adverse events, both before and after face shields were added as PPE on April 13, 2020.ResultsOf the 1,344 colonoscopies analyzed, 715 and 629 were performed before and after the introduction of face shields, respectively. The median withdrawal time was similar between the face shield and no-face shield groups (8.72 minutes vs 8.68 minutes, p=0.816), as was the ADR (41.5% vs 39.8%, p=0.605) and APC (0.72 vs 0.77, p=0.510). Polypectomy-associated quality indicators, such as polypectomy time and polypectomy adverse events were also not different between the groups. Quality indicators were not different between the face shield and no-face shield groups of gastroenterology fellows, or of expert endoscopists.ConclusionsColonoscopy performance was not unfavorably affected by the use of a face shield. PPE, including face shields, can be recommended without a concern about colonoscopy quality deterioration.