Evaluation of Degenerative Lumbar Scoliosis After Short Segment Decompression and Fusion

The objective of this study was to investigate short segment decompression of degenerative lumbar scoliosis (DLS) and the efficiency of fusion treatment.After DLS surgery, the patients were retrospectively reviewed using the VAS (visual analog scale) and ODI (Oswestry Disability Index) to assess clinical outcomes. All patients underwent posterior lumbar decompressive laminectomy, pedicle screw internal fixation, and posterolateral bone graft fusion surgery. Radiographic measurements included the scoliotic Cobb angle, the fused Cobb angle, the anterior intervertebral angle (AIA), the sagittal intervertebral angle (SIA), and lumbar lordosis angle. The relationships between these parameters were examined by bivariate Pearson analysis and linear regression analysis.Preoperatively, the Cobb angle at the scoliotic segment was 15.4°, which decreased to 10.2° immediately following surgery (P < 0.05). The AIA significantly increased by the last follow-up (4.4 ± 3.4) compared with pre- and postoperative values (2.5 ± 2.8 and 2.2 ± 2.4, respectively; P < 0.05). However, the scoliotic Cobb angle and the AIA did not correlate with the VAS or ODI scores. At the final follow-up, no patients had pseudoarthrosis or internal instrumentation-related complications.Short fusion surgical treatment results in limited DLS correction, with correction loss over time. The AIA between the upper adjacent segment and proximal fused vertebra continues to increase postoperatively, which does not exacerbate clinical symptoms, as reflected by the low reoperation rates for repairing degeneration at adjacent levels.     

Severe lumbar spinal stenosis combined with Guillain-Barré syndrome: A case report

BACKGROUNDGuillain-Barré syndrome (GBS) is a rare disorder that typically presents with ascending weakness, pain, paraesthesias, and numbness, which mimic the findings in lumbar spinal stenosis. Here, we report a case of severe lumbar spinal stenosis combined with GBS.CASE SUMMARYA 70-year-old man with a history of lumbar spinal stenosis presented to our emergency department with severe lower back pain and lower extremity numbness. Magnetic resonance imaging confirmed the diagnosis of severe lumbar spinal stenosis. However, his symptoms did not improve postoperatively and he developed dysphagia and upper extremity numbness. An electromyogram was performed. Based on his symptoms, physical examination, and electromyogram, he was diagnosed with GBS. After 5 d of intravenous immunoglobulin (0.4 g/kg/d for 5 d) therapy, he gained 4/5 of strength in his upper and lower extremities and denied paraesthesias. He had regained 5/5 of strength in his extremities when he was discharged and had no symptoms during follow-up.CONCLUSIONGBS should be considered in the differential diagnosis of spinal disorder, even though magnetic resonance imaging shows severe lumbar spinal stenosis. This case highlights the importance of a careful diagnosis when a patient has a history of a disease and comes to the hospital with the same or similar symptoms.     

科研评价导向的改变对中文科技期刊的机遇与挑战

【目的】 值此《中国科技期刊研究》创刊30周年之际,思考科研评价体系的改变给中文科技期刊带来的影响,为中文期刊探寻发展路径。【方法】 结合对中文科技期刊困境的研究,提出应对策略。【结果】 近期国家陆续出台的纠偏评价导向的政策文件,为中文科技期刊既带来了发展机遇,也提出了挑战。【结论】 在重构符合中文科技期刊发展特点的评价体系的基础上,中文科技期刊应明确目标定位,面向国家需求,提升知识服务能力,建立品牌特色。     

足趾移植长手指全形再造术的临床应用

目的探讨足趾移植长手指全形再造手术的临床疗效。方法自2015年6月至2019年6月,对16例因外伤致手指缺损患者采用足趾移植长手指全形再造术,术后评估供区及受区的感觉功能、运动功能及外观形态,分析指甲畸形及增生性瘢痕的发生情况,并记录术后发生感染、血肿、皮片坏死及供区愈合不良等情况;通过调查问卷的方式分析患者的满意度。结果所有患者术后获随访1~12个月,其中2例受区发生感染,1例受区皮片边缘发生坏死,经换药后予以缓解;其余患者的供、受区均未出现长时间的痛疼感觉,受区感觉功能恢复达87.50%,受区运动功能恢复均较满意,手指外形基本满意。供区感觉受影响者2例,运动功能受限者1例,外形一般者2例。所有患者无指甲畸形及增生性瘢痕发生;满意者1例,基本满意者14例,不满意者1例。结论采用足趾移植长手指全形再造手术,基本可以满足患者及医师对于缺损手指进行完美修复的目标。     

Resting respiratory sinus arrhythmia moderates the association between social phobia symptoms and self‐reported physical symptoms

The present study sought to investigate the association between social phobia symptoms and self‐reported physical symptoms and the moderation effect of resting respiratory sinus arrhythmia (RSA) on this link. Data of 5‐min resting RSA, social phobia symptoms assessed by the Social Phobia Scale, and physical symptoms assessed by the Cohen–Hoberman Inventory of Physical Symptoms were collected from 167 undergraduate students. Results indicated that higher levels of social phobia symptoms were associated with higher levels of self‐reported physical symptoms. Resting RSA played the moderating role in the link between social phobia symptoms and self‐reported physical symptoms, such that social phobia symptoms were positively associated with self‐reported physical symptoms among individuals with low resting RSA, whereas this association was nonsignificant among individuals with high resting RSA. These findings suggest that high resting RSA as a physiological marker of better self‐regulation capacity might buffer the effect of social phobia symptoms on physical health.     

Mixed Reality Combined with Three‐Dimensional Printing Technology in Total Hip Arthroplasty: An Updated Review with a Preliminary Case Presentation

Three‐dimensional (3D) printing technology, virtual reality, and augmented reality technology have been used to help surgeons to complete complex total hip arthroplasty, while their respective shortcomings limit their further application. With the development of technology, mixed reality (MR) technology has been applied to improve the success rate of complicated hip arthroplasty because of its unique advantages. We presented a case of a 59‐year‐old man with an intertrochanteric fracture in the left femur, who had received a prior left hip fusion. After admission to our hospital, a left total hip arthroplasty was performed on the patient using a combination of MR technology and 3D printing technology. Before surgery, 3D reconstruction of a certain bony landmark exposed in the surgical area was first performed. Then a veneer part was designed according to the bony landmark and connected to a reference registration landmark outside the body through a connecting rod. After that, the series of parts were made into a holistic reference registration instrument using 3D printing technology, and the patient's data for bone and surrounding tissue, along with digital 3D information of the reference registration instrument, were imported into the head‐mounted display (HMD). During the operation, the disinfected reference registration instrument was installed on the selected bony landmark, and then the automatic real‐time registration was realized by HMD through recognizing the registration landmark on the reference registration instrument, whereby the patient's virtual bone and other anatomical structures were quickly and accurately superimposed on the real body of the patient. To the best of our knowledge, this is the first report to use MR combined with 3D printing technology in total hip arthroplasty.