Packing and Uniaxial Alignment of Liquid Crystalline Oligofluorenes

Summary: Liquid crystalline oligomers of 9,9‐bis(2‐ethylhexyl)fluorene of defined degree of polymerization 4, 5, 6, and 7 were investigated by X‐ray diffraction in the non‐oriented and in the aligned state. The diffraction data give evidence for a smectic B type phase for all of the oligomers. Quenching below the glass transition does not change the structure of the liquid crystalline phase. This allows to align spin‐coated films of these oligomers on rubbed polyimide substrates to give monodomain films. These are stable against thermal disordering below T_g, e.g. at room temperature. The degree of alignment is characterized by the dichroic spectra and polarized fluorescence spectra. Dichroic ratios and polarization ratios increase substantially with the chain length and values as high as D = 23 and P = 41 are obtained for the heptamer. The type of packing of the oligomers in the LC phase is discussed based on the X‐ray single crystal structure of models. In one such model the packing of the 2‐ethylhexyl side chains could be fully resolved, while the other model reveals the torsional angle between adjacent fluorene units in the same molecule as 144.2° which corroborates earlier work based on fiber diffraction of corresponding polyfluorenes.

     

Determination of penetration profiles of topically applied substances by means of tape stripping and optical spectroscopy: UV filter substance in sunscreens

Penetration profiles of topically applied drugs and cosmetic products provide important information on their efficacy. The application of tape stripping in combination with UV/VIS spectroscopy is checked to determine the local position of topically applied substances inside the stratum corneum, the penetration profile. The amount of corneocytes removed with each tape strip is quantified via the particle-dependent absorption, the pseudoabsorption, in the visible spectral range. The concentration of a typical UV filter substance, 4-methylbenzylidene camphor, is determined by optical spectroscopy using the tape strips removed originally. In this case, a time-dependent increase in the absorbance must be taken into account. Laser scanning microscopic investigations confirm that the nonhomogeneous distribution of the filter substance, on the strips, can explain this spectroscopic behavior. When reaching a homogeneous distribution, the UV spectroscopic signal reflects the correct concentration. These spectroscopic values are compared with high performance liquid chromatography (HPLC) data. The values obtained with both methods for the concentrations of 4-methylbenzylidene camphor are in good agreement. The data obtained are used to illustrate the determination of a penetration profile of a UV filter substance. The results demonstrate that the described protocol is well suited to characterize, in a simple manner, topically applied substances that have a characteristic UV/VIS absorption band.     

Ribosomal RNA of Nosema algerae and phylogenetic relationship to other microsporidia

Microsporidia are intracellular parasites that are common in invertebrates. Taxonomic classification is mostly restricted to morphologic and physiologic data. Limited data are available about taxonomic classification using DNA-sequence data for analysis. We examined the small-subunit (SSU) rDNA, the intergenic spacer (ITS) region, and a part of the large-subunit (LSU) rDNA of Nosema algerae, a parasite of mosquitoes, taken from a laboratory colony of Anopheles stephensi. Target gene amplifications were done by polymerase chain reaction (PCR) and, after cloning, DNA fragments were sequenced. The SSU-rDNA sequence obtained was aligned with several other microsporidian SSU-rDNA sequences available from the GenBank or EMBL data bases and was analyzed by different methods. On the basis of the results of our phylogenetic analysis, we suggest that our N. algerae isolate is not closely related to other microsporidia belonging to the genus Nosema. Received: 31 May 1999 / Accepted: 27 July 1999     

Cytoskeletal modulation of the response to mechanical stimulation in human vascular endothelial cells

Possible interactions of cytoskeletal elements with mechanically induced membrane currents and Ca²⁺ signals were studied in human endothelial cells by using a combined patch-clamp and Fura II technique. For mechanical stimulation, cells were exposed to hypotonic solution (HTS). The concomitant cell swelling activates a Cl^– current, releases Ca²⁺ from intracellular stores and activates Ca²⁺ influx. To interfere with the cytoskeleton, cells were loaded either with the F-actin-stabilizing agent phalloidin (10 mol/l), or the F-actin-depolymerizing substance cytochalasin B (50 mol/l). These were administered either in the bath or the pipette solutions. The tubulin structure of the endothelial cells was modulated by taxol (50 mol/l), which supports polymerization of tubulin, or by the depolymerizing agent colcemid (10 mol/l) both applied to the bath. Immunofluorescence experiments show that under the chosen experimental conditions the cytoskeletal modifiers employed disintegrate the F-actin and microtubuli cytoskeleton. Neither of these cytoskeletal modifiers influenced the HTS-induced Cl^– current. Ca²⁺ release was not affected by cytochalasin B, taxol or colcemid, but was suppressed if the cells were loaded with phalloidin. Depletion of intracellular Ca²⁺ stores by thapsigargin renders the intracellular [Ca²⁺] sensitive to the extracellular [Ca²⁺], which is indicative of a Ca²⁺ entry pathway activated by store depletion. Neither cytochalasin B nor phalloidin affected this Ca²⁺ entry. We conclude that F-actin turnover or depolymerization is necessary for Ca²⁺ release by mechanical activation. The tubulin network is not involved. The Ca²⁺ release-activated Ca²⁺ entry is not modulated by the F-actin cytoskeleton.     

Properties of mouse leukemia viruses. XI. Immunoelectron microscopic studies on viral structural antigens on the cell surface.

Immunoelectron microscopic studies confirmed most of the results of the cytotoxic tests reported by Hunsmann et al. (Hunsmann, et al. (1976). Virology69, 157–168). GP71 and P12 viral structural antigens could be demonstrated on the surface of murine C-virus-producing but not on nonproducing transformed K Balb, MSV85 and HT-1 cells. GP71 serum revealed a type- and group-specific reactivity but failed to demonstrate an interspecies antigenic determinant, probably because of its relatively low corresponding titer. P12 antiserum reacted mainly type specifically. By this method, P10, P15, and P31 antigens were not detectable in significant amounts with the possible exception of P31 antigen on the highly producing FLV-Eveline cell. GP71 antigen occurred on the viral surface as well as on nonbudding areas of the cell membrane. P12 antigen was absent on virus particles but relatively abundant on nonbudding areas of the cell surface. No difference in the distribution of type- and group-specific determinants of GP71 was recognizable, and no clusters of the antigens studied were observed on the membrane under the conditions used. Based on these results it is suggested that among the virus structural antigens only GP71 and P12 antigens are integral surface constituents of the cells investigated and that none of the antigenic determinants studied represents a murine C-virus-induced tumor-specific cell surface antigen (TSSA). The relation of viral structural antigens to cell surface and soluble antigens described earlier and the significance of the results for possible preparation of vaccines are discussed.     

The water jet as a new tool for endoprosthesis revision surgery--an in vitro study on human bone and bone cement

In revision surgeries of endoprostheses, the interface between implant and bone cement or bone must be loosened. Conventional tools have many disadvantages because of their size and limited range. Taking advantage of the selective and athermic cutting process, a plain water jet is already used in order to cut soft tissues. This study investigates the possibilities of both a plain and an abrasive water jet as cutting tools for revision surgery. Samples of the mid-diaphysis of human femora and bone cement (CMW3) were cut with a plain water jet (PWJ) and an abrasive water jet (AWJ) at two different jet-to-surface angles (30 degrees,90 degrees ) and at five different pressure levels (30, 40, 50, 60, 70 MPa). For a PWJ a selective pressure range was identified, where only bone cement was cut. Injecting a bio-compatible abrasive (lactose) to the jet stream resulted in significantly higher cut depths in both materials. Material removal in bone was significantly less at the smaller jet-to-surface angle for both techniques. No clear selectivity between bone and bone cement was observed for application of the AWJ. However, the material removal rate was significantly higher for bone cement than for bone at all pressure levels. The results indicate that an AWJ might be an alternative tool for cement removal. The possibility for localised cutting at interfaces could be an advantage for revision of a non-cemented prosthesis.     

How do gastric carcinoma classification systems relate to mucin expression patterns? An immunohistochemical analysis in a series of advanced gastric carcinomas

Gastric carcinoma classifications differ in their value for distinguishing tumors according to their morphological pattern, functional properties, and biological significance. In this study we evaluated which of three established classification systems is best correlated with the expression patterns of certain mucins. A total of 160 gastric carcinomas from Turkey and Germany were screened immunohistochemically for the expression of MUC1, MUC2, MUC5AC, and MUC6, and the results were related to the different tumor categories in Lauren's, Carneiro's, and Goseki's classifications. It was found that in all three classifications carcinomas belonging to the gland-forming category most commonly expressed MUC1: 78% of Goseki's grade I carcinomas, 81.1% of Lauren's intestinal type carcinomas, and 82.8% of Carneiro's glandular type. MUC2 was expressed in all Goseki grade II carcinomas, which comprise the mucinous type, while it was not significantly associated with any of the other classifications. MUC5AC was found in all Goseki grade IV carcinomas, i.e., signet ring cell carcinomas. It was also significantly associated with Carneiro's mixed type and isolated cell type carcinomas, while there was no correlation with any of Lauren's types. MUC6 failed to show a relationship with any of the categories of the various classifications. We conclude that Goseki's classification is best correlated with MUC expression patterns because it distinguishes clearly between MUC1-positive gland-forming carcinomas, MUC2-positive mucinous ones, and MUC5AC-positive signet ring cell carcinomas. It is likely that each of these gastric carcinoma types has its own carcinogenesis.     

Transmission of tuberculosis between men and pet birds: a case report

The present report describes a case of Mycobacterium tuberculosis infection in an African Grey parrot (Psittacus erithacus erithacus) kept as a pet bird. Diagnosis was confirmed by microbiologic and pathologic results, and indicated a human–avian transmission. Clinical signs included sublingual nodules resulting in anorexia and signs of osteolysis in the long bones. Proliferation consisted of several nodules with small greenish-caseous foci in cross-section and revealed a severe granulomatous inflammation without intralesional acid-fast rods. M. tuberculosis was cultured from a pooled sample of sublingual and liver nodules, and was confirmed via polymerase chain reaction. Transmission between men and parrot was proved by spoligotyping pattern analysis. The absence of facial skin lesions and acid-fast rods within the tubercles is contrary to previous publications of tuberculosis in birds. This disease in a common pet bird species is of zoonotic importance, and those parrots with close contact to owners suffering from tuberculosis may serve as a potential reservoir for human infection.