Overview of Electricity Transmission Conductors: Challenges and Remedies

Electricity transmission is an essential intermediary linking power generation and distribution. Voltage drops or total blackouts have always characterized the transmission and distribution of electricity in the sub-Saharan Africa and some Asian dwellers. This has been attributed partly to faulty, defective or dilapidated transmission conductors/networks. The aim of this study is to identify the causes of those defects in the transmission conductors and proffer possible remedies to them. Studies have shown that the current production techniques of transmission conductors (TCs) generate defective products, and that the materials used have their own challenges too. This work, therefore, reviewed all the production techniques and materials used in the development of TCs. It was observed that pultrusion, extrusion, hot-rolling, and stir-casting were the techniques used in the production of transmission conductors. Defects such as shrinkage, pores, impurities, and warps were identified in those techniques and some recommendations to ameliorate the defects of those techniques were presented. Spark plasma sintering is recommended as the most promising solid- state production techniques that should be adopted in fabricating transmission conductors, though it is yet to be developed for producing long-span products. In addition, advanced TCs materials such as Al-CNTs, Al-Nb, Al-Ti, and Al-B2 were presented as better alternatives to the existing TCs materials. By producing TCs with the recommended techniques and materials, the electricity availability will be enhanced; and this will lead to sustainable industrial growth and economic stability in the third world countries and the entire world.     

Magnetocaloric and Giant Magnetoresistance Effects in La-Ba-Mn-Ti-O Epitaxial Thin Films: Influence of Phase Transition and Magnetic Anisotropy

Magnetic perovskite films have promising properties for use in energy-efficient spintronic devices and magnetic refrigeration. Here, an epitaxial ferromagnetic La_0.67Ba_0.33Mn_0.95Ti_0.05O₃ (LBMTO-5) thin film was grown on SrTiO₃(001) single crystal substrate by pulsed laser deposition. High-resolution X-ray diffraction proved the high crystallinity of the film with tetragonal symmetry. The magnetic, magnetocaloric and magnetoresistance properties at different directions of the applied magnetic field with respect to the ab plane of the film were investigated. An in-plane uni-axial magnetic anisotropy was evidenced. The LBMTO-5 epilayer exhibits a second-order ferromagnetic-paramagnetic phase transition around 234 K together with a metal–semiconductor transition close to this Curie temperature (T_C). The magnetic entropy variation under 5 T induction of a magnetic field applied parallel to the film surface reaches a maximum of 17.27 mJ/cm³ K. The relative cooling power is 1400 mJ/cm³ K (53% of the reference value reported for bulk Gd) for the same applied magnetic field. Giant magnetoresistance of about 82% under 5 T is obtained at a temperature close to T_C. Defined as the difference between specific resistivity obtained under 5 T with the current flowing along the magnetic easy axis and the magnetic field oriented transversally to the current, parallel and perpendicular to the sample plane, respectively, the in-plane magneto-resistance anisotropy in 5 T is about 9% near the T_C.     

The African Swine Fever Isolate ASFV-Kenya-IX-1033 Is Highly Virulent and Stable after Propagation in the Wild Boar Cell Line WSL

We describe the characterization of an African swine fever genotype IX virus (ASFV-Kenya-IX-1033), which was isolated from a domestic pig in western Kenya during a reported outbreak. This includes the efficiency of virus replication and in vivo virulence, together with genome stability and virulence, following passage in blood macrophages and in a wild boar lung cell line (WSL). The ASFV-Kenya-IX-1033 stock retained its ability to replicate in primary macrophages and retained virulence in vivo, following more than 20 passages in a WSL. At the whole genome level, a few single-nucleotide differences were observed between the macrophage and WSL-propagated viruses. Thus, we propose that the WSL is suitable for the production of live-attenuated ASFV vaccine candidates based on the modification of this wild-type isolate. The genome sequences for ASFV-Kenya-IX-1033 propagated in macrophages and in WSL cells were submitted to GenBank, and a challenge model based on the isolate was developed. This will aid the development of vaccines against the genotype IX ASFV circulating in eastern and central Africa.     

3D-Printed EVA Devices for Antiviral Delivery and Herpes Virus Control in Genital Infection

Herpes viruses are widespread in the human population and can cause many different diseases. Genital herpes is common and can increase the risk of HIV infection and neonatal herpes. Acyclovir is the most used drug for herpes treatment; however, it presents some disadvantages due to its poor oral bioavailability. In this study, some ethylene vinyl acetate devices with different acyclovir amounts (0, 10, and 20 wt.%) were manufactured by fused filament fabrication in two different geometries, an intrauterine device, and an intravaginal ring. Thermal analyses suggested that the crystallinity of EVA decreased up to 8% for the sample loaded with 20 wt.% of acyclovir. DSC, SEM, and FTIR analyses confirmed that the drug was successfully incorporated into the EVA matrix. Moreover, the drug release tests suggested a burst release during the first 24 h followed by a slower release rate sustained up to 80 days. Biological assays showed the biocompatibility of the EVA/ACV device, as well as a 99% reduction in vitro replication of HSV-1. Finally, the EVA presented a suitable performance for 3D printing manufacturing that can contribute to developing personalized solutions for long-term herpes treatment.     

Isoniazid preventive therapy-related adverse events among Malawian adults on antiretroviral therapy: A cohort study

Adverse events may be a cause of observed poor completion of isoniazid preventive therapy (IPT) among people living with HIV in high tuberculosis burden areas. Data on IPT-related adverse events (AE) from sub-Saharan Africa are scarce. We report IPT-related AEs, associated clinical characteristics, and IPT discontinuations in adults who were stable on antiretroviral therapy (ART) when they initiated IPT. Cohort study nested within a randomized, controlled, clinical trial of cotrimoxazole and chloroquine prophylaxis in Malawians aged ≥ 18 years and virologically suppressed on ART. Eight hundred sixty-nine patients were followed for a median of 6 months after IPT initiation. IPT relatedness of AEs was determined retrospectively with the World Health Organization case-causality tool. Frailty survival regression modeling identified factors associated with time to first probably IPT-related AE. The overall IPT-related AE incidence rate was 1.1/person year of observation. IPT relatedness was mostly uncertain and few AEs were severe. Most common were liver and hematological toxicities. Higher age increased risk of a probably IPT-related AE (aHR = 1.02; 95% CI 1.00–1.06; P = .06) and higher weight reduced this risk (aHR = 0.98; 95% CI 0.96–1.00; P = .03). Of 869 patients, 114 (13%) discontinued IPT and 94/114 (82%) discontinuations occurred at the time of a possibly or probably IPT-related AE. We observed a high incidence of mostly mild IPT-related AEs among individuals who were stable on ART. More than 1 in 8 persons discontinued IPT. These findings inform strategies to improve implementation of IPT in adults on ART, including close monitoring of groups at higher risk of IPT-related AEs.     

Evaluating a Model of Added Sugar Intake Based on Amino Acid Carbon Isotope Ratios in a Controlled Feeding Study of U.S. Adults

Previous studies suggest that amino acid carbon stable isotope ratios (CIR_AAs) may serve as biomarkers of added sugar (AS) intake, but this has not been tested in a demographically diverse population. We conducted a 15-day feeding study of U.S. adults, recruited across sex, age, and BMI groups. Participants consumed personalized diets that resembled habitual intake, assessed using two consecutive 7-day food records. We measured serum (n = 99) CIR_AAs collected at the end of the feeding period and determined correlations with diet. We used forward selection to model AS intake using participant characteristics and 15 CIR_AAs. This model was internally validated using bootstrap optimism correction. Median (25th, 75th percentile) AS intake was 65.2 g/day (44.7, 81.4) and 9.5% (7.2%, 12.4%) of energy. The CIR of alanine had the highest, although modest, correlation with AS intake (r = 0.32, p = 0.001). Serum CIR_AAs were more highly correlated with animal food intakes, especially the ratio of animal to total protein. The AS model included sex, body weight and 6 CIR_AAs. This model had modest explanatory power (multiple R² = 0.38), and the optimism-corrected R² was lower (R² = 0.15). Further investigations in populations with wider ranges of AS intake are warranted.     

Radiographic Response Assessment Strategies for Early-Phase Brain Trials in Complex Tumor Types and Drug Combinations: from Digital “Flipbooks” to Control Systems Theory

There is an urgent need for drug development in brain tumors. While current radiographic response assessment provides instructions for identifying large treatment effects in simple high- and low-grade gliomas, there remains a void of strategies to evaluate complex or difficult to measure tumors or tumors of mixed grade with enhancing and non-enhancing components. Furthermore, most patients exhibit some period of alteration in tumor growth after starting a new therapy, but simple response categorization (e.g., stable disease, progressive disease) fails to provide any meaningful insight into the depth or degree of potential “subclinical” therapeutic response. We propose a creative solution to these issues based on a tiered strategy meant to increase confidence in identifying therapeutic effects even in the most challenging tumor types, while also providing a framework for complex evaluation of combination and sequential treatment schemes. Specifically, we demonstrate the utility of digital “flipbooks” to quickly identify subtle changes in complex tumors. We show how a modified Levin criteria can be used to quantify the degree of visual changes, while establishing estimates of the association between tumor volume and visual inspection. Lastly, we introduce the concept of quantifying therapeutic response using control systems theory. We propose measuring changes in volume (proportional), the area under the volume vs. time curve (integral) and changes in growth rates (derivative) to utilize a “PID” controller model of single or combination therapeutic activity. Supplementary InformationThe online version contains supplementary material available at 10.1007/s13311-022-01241-8.     

Analysis of the Effect of Machining of the Surfaces of WAAM 18Ni 250 Maraging Steel Specimens on Their Durability

It is now well-known that the interaction between surface roughness and surface-breaking defects can significantly degrade the fatigue life of additively manufactured (AM) parts. This is also aptly illustrated in the author’s recent study on the durability of wire and arc additively manufactured (WAAM) 18Ni 250 Maraging steel specimens, where it was reported that failure occurred due to fatigue crack growth that arose due to the interaction between the surface roughness and surface-breaking material defects. To improve the durability of an AM part, several papers have suggested the machining of rough surfaces. However, for complex geometries the fully machining of the entire rough surface is not always possible and the effect of the partial machining on durability is unknown. Therefore, this paper investigates if partial machining of WAAM 18Ni 250 Maraging steel surfaces will help to improve the durability of these specimens. Unfortunately, the result of this investigation has shown that partial machining may not significantly improve durability of WAAM 18Ni 250 Maraging steel specimens. Due to the order of surface roughness seen in WAAM 250 Maraging steel, the improvement to durability is only realized by full machining to completely remove the remnants of any print artefacts.