Plaque development in relation to the periodontal condition and bacterial load of the saliva

AIM: To investigate the influence of the oral bacterial load on plaque development in various groups of periodontitis patients and in healthy subjects. MATERIAL AND METHODS: This study included subjects with a healthy periodontium, a healthy reduced periodontium after treatment, an inflamed reduced periodontium after treatment and untreated periodontitis. At the start of the study, subjects were instructed to rinse with 10 ml reduced transport fluid (RTF) for 10 s in order to evaluate the oral bacterial load. The microbiological evaluation included anaerobe culture and phase-contrast microscopy. Next, the amount of plaque and the clinical condition were evaluated. Thereafter, all supragingival plaque was removed and patients were instructed to refrain from all oral hygiene procedures for 19 h. Subsequently, the rinsing procedure and the evaluation of the amount of plaque were repeated. RESULTS: The amount of plaque that developed in 19 h was significantly higher in the untreated periodontitis group as compared with the two healthy groups. In case of an inflamed reduced periodontium, sites with deep pockets developed more plaque in 19 h than sites with shallow pockets. The number of bacteria present in the rinsing samples of the two inflamed groups was considerably higher than of the two periodontally healthy groups. A significant correlation was found between the bleeding index at intake and the plaque index at 19 h. No correlations were found between gingival recession and the bacterial counts at intake, and the plaque index at 19 h. CONCLUSION: The present findings support the concept that the periodontal condition is the dominating factor in relation to the rate of plaque formation. The number of bacteria present in the oral cavity as ascertained by means of a rinsing sample does not seem to play a role.     

Primarily Research

Abstract: Composite materials have become an integral part of the wide range of filling materials currently available. Conditioning is necessary to achieve adequate bonding of the composite material to enamel and dentin. Normally, this is done by applying acid preparations to the dental surfaces. These acids have an etching effect that causes surface roughening. The increasing application of lasers in dentistry has introduced another possibility. Laser irradiation can cause roughening of enamel and dentin surfaces. Another interesting alternative is the so-called kinetic cavity preparation technique. This method also results in distinct surface roughening. The purpose of the present study, was to compare the described methods. Tensile bond strength tests and shear bond tests were carried out to examine the adhesion of a composite material to surfaces treated with these methods. Laser irradiation with certain devices and the air-abrasive technique yielded results similar to those with acid etching.     

Mineralization at the interface of implants

Osseointegration of implants is crucial for the long-term success of oral implants. Mineralization of the bone's extracellular matrix as the ultimate step of a mature bone formation is closely related to implant osseointegration. Osteogenesis at oral implants is a complex process, driven by cellular and acellular phenomena. The biological process of the maintenance and emergence of minerals in the vicinity of oral implants is influenced to a great extent by biophysical parameters. Implant-related structural and functional factors, as well as patient-specific factors, govern the features of osteogenesis. To understand the influence of these factors in peri-implant bone mineralization, it is important to consider the basic biological processes. Biological and crystallographic investigations have to be applied to evaluate mineralization at implant surfaces at the different hierarchical levels of analysis. This review gives insight into the complex theme of mineral formation around implants. Special focus is given to new developments in implant design and loading protocols aimed at accelerating osseointegration of dental implants.     

The interleukin-1 polymorphism,smoking, and the risk of periodontal disease in the population-based SHIP study

Several studies have shown a role for interleukin-1 gene cluster polymorphisms in the risk assessment for periodontal diseases. In the Study of Health in Pomerania (SHIP), 3148 subjects were randomly selected from the population and assessed for a broad range of diseases and environmental/behavioral risk factors. From the complete study group in the age 40 to 60 years, N = 1085 subjects were genotyped for the interleukin-1 genotype composite polymorphism in relation to periodontal parameters. The study objective was to elucidate the gene-environment interaction between the risk factors smoking and IL-1 polymorphism. An increased risk of periodontal disease was found for IL-1 genotype-positive smokers: odds ratio adjusted for age, sex, education, and plaque OR = 2.50 (95% C.I. 1.21 to 5.13; p = 0.013). This was not the case with subjects who never smoked: OR = 1.09 (0.73-1.62; p = 0.676). These results support the hypothesis of gene-environmental interaction in periodontitis.     

Comparison of the bleeding on marginal probing index and the Eastman interdental bleeding index as indicators of gingivitis

AIM: The purpose of the present study was to compare 2 indices, i.e., the Eastman interdental bleeding (EIB) index and the bleeding on marginal probing (BOMP) index. The comparison was made (a) in terms of the degree of bleeding provoked and the relationship with plaque in natural gingivitis and (b) for the ability of these 2 methods to detect differences between the development of experimental gingivitis in a control group and a group in which the development of gingival inflammation was suppressed by treatment. For the present studies, subjects were selected without interdental recession of the gingival tissues. METHODS EXPERIMENT 1: In this experiment, 43 subjects having established moderate gingivitis were assessed using a random splitmouth design (1st and 3rd/2nd and 4th quadrant). Plaque was scored on all approximal sites after which the BOMP index was assessed in one half of the mouth and the EIB index in the other. RESULTS EXPERIMENT 1: The BOMP index showed a bleeding score of 84% and the EIB index of 87%. The significant correlation between plaque and gingival bleeding for the BOMP index (0.55) was higher than for the EIB index (0.44). METHODS EXPERIMENT 2: For this experiment, 25 subjects participated in an experimental gingivitis trial of the lower jaw. At baseline, first the BOMP index and immediately thereafter the EIB index were assessed at all approximal sites. Experimental gingivitis (EG) was carried out in one randomly assigned quadrant and as a treatment modality only floss was used in the other (FL). RESULTS EXPERIMENT 2: In the EG quadrant, the BOMP index increased to 69% and the EIB index to 73%. Both indices showed a significant correlation with plaque; 0.60 and 0.64 respectively. In the FL quadrant, the BOMP index increased to 38% and the EIB index to 30%. No significant correlation between both gingivitis indices and the amount of plaque was present in the FL quadrant. CONCLUSION: The ability of the BOMP index and the EIB index to assess the level gingival inflammation appears to be comparable.     

Effect of smoking on periodontal health in molar teeth

BACKGROUND: It is generally accepted that the primary cause of periodontitis is bacterial infection of long duration. In addition, there are several risk factors that may increase the probability and severity of periodontitis. For example, an increased breakdown of alveolar bone has been observed in smokers compared to never-smokers. The objective of this study was to investigate the association between cigarette smoking and periodontal health, in particular, furcation involvement in molar teeth. METHODS: One hundred twenty (120) adult regular dental patients, presenting with at least 20 teeth each, third molars excluded, were evaluated. Sixty of the subjects consumed an average (+/- SD) of 16.8 +/- 3.8 cigarettes daily and had smoked for 21.4 +/- 5.7 years. The remaining subjects presented a negative history of smoking. Periodontal conditions for the molar teeth were recorded at the first and second mandibular molar buccal furcation area. RESULTS: Oral hygiene standards and dental care habits did not differ notably between smokers and never-smokers. Smokers exhibited significantly fewer molar teeth than never-smokers (2.2 +/- 1.1 versus 3.0 +/- 0.8; P<0.01). Also, smokers exhibited significantly advanced gingival recession, probing depth, clinical attachment loss, furcation involvement, and tooth mobility compared to never-smokers (P<0.01). CONCLUSIONS: The results of this study suggest that long-term cigarette smoking significantly worsens periodontal health including degree and incidence of furcation involvement in molar teeth.     

A growth-related concept for skeletal class II treatment.

The use of a combined activator--high-pull headgear appliance for treatment of Class II, Division 1 malocclusion is presented as a preliminary report. The activator itself is equipped with a palatal bar, lower lip pads, and torque-control auxiliaries for the upper incisors. The face-bow is mounted directly on the activator, and the extraoral force vector is equivalent to that of an anterior high-pull vector. During bite registration the veritcal displacement of the mandible is restricted to a minimum, and the anterior displacement should not exceed 6 mm. On the basis of current knowledge of the growth of the bony facial structures, treatment objectives and a specific approach for skeletal Class II correction are defined. Following these objectives, the therapy aims at correcting the malocclusion without diverting the anterior landmarks of the bony face from their specific lines of growth. This is brought about by the corresponding mechanics of the activator-headgear combination. The corrective effect of this appliance may be assumed to be the result of several different factors. The maxillary dentition is restrained in a posterior cranial direction, and an inhibitory effect on the maxilla counter to its line of development is attained. The mandibular dentition is influenced in an anterior downward direction by means of the bite registration, and the occlusion is unlocked during treatment. Any transfer of distally directed headgear forces from the maxilla to the mandible is prevented. Temporary stimulation of condylar growth, possibly combined with temporary posterior deflection of condylar growth, may also be induced. In this way it is possible to take maximum advantage of condylar growth in the sagittal dimension. Thus, not only is the malocclusion corrected but, at the same time, decisive profile improvement is achieved by anterior development of the mandible. From the experience gained so far with a Class II, Division 1 sample undergoing treatment with the activator-headgear combination, it would appear that skeletal control of the direction of facial growth during treatment is possible. A quantitative report on this group of approximately forty patients, some of whom are still receiving treatment, is in preparation.     

Root substance removal by scaling and root planing.

The amount of root substance removed by scaling and root planing is largely unknown. The present study evaluated in vitro the root substance loss caused by a defined number of working strokes at known forces. Forty extracted teeth with loss of connective tissue attachment into the middle third of the roots were washed and embedded in plaster, leaving one entire corono-apical tooth aspect exposed. The teeth were reproducibly repositioned in a bench-vise, where a profilometer repeatedly measured root surface levels at the same location. In a standard area of the roots a total of 40 working strokes were applied. Low forces were used in 30 teeth and high forces in 10 teeth. The forces were recorded using a piezo-electric receiver built into the upper shank of the curet. Root substance loss was measured after 5, 10, 20, and 40 working strokes. The results showed that the mean low force used per working stroke across all 40 strokes was 3.04 Newtons for the low forces, and 8.48 Newtons for the high forces. Mean cumulative loss of root substance across 40 strokes was 148.7 microns at low forces, and 343.3 microns at high forces. The mean force per stroke increased slightly across the 40 strokes, while substance removal per stroke decreased. Substance removal per stroke during strokes 1 to 5 was 6.8 microns using low forces and 20.6 microns using high forces. During strokes 21 to 40 mean removal per stroke was 2.3 microns at low forces, and 5.6 microns at high forces. These results suggest that high forces remove more root substance, and loss per stroke becomes less with increasing numbers of strokes.