Glomerular filtration rate is an indicator of endothelial function at early stages of chronic kidney disease

AIM: To study effects of glomerular filtration rate (GFR) reduction on endothelial function in patients at early stages of chronic renal kidney (CKD). MATERIAL AND METHODS: Endothelial function of 101 patients with CKD of stage I-III was examined using reactive hyperemia test, dopplerography of skin vessels with ionophoresis of acetylcholin and nitroglycerin, lipidogram parameters, homocistein and annexin A5 levels, intima-media complex thickness of the common carotid artery, echocardiography findings. RESULTS: Cardiovascular complications risk factors were found in all the patients: increased body mass index, arterial hypertension, dyslipoproteinemia, hyperhomocysteinemia. Reduced GFR (under 90 ml/min) is an independent factor of atherosclerosis risk. CONCLUSION: GFR reduction corresponding to CRD of stage II is accompanied with enhancement of apoptosis and development of vasomotor endothelial dysfunction that in combination with risk factors contribute to development of a preclinical atherosclerosis phase.     

Cross-sectional analysis of the implant-abutment interface

The purpose of this study was to develop a technique to evaluate the implant-abutment gap of an external hexagon implant system as a function of radius. Six implants of 3.75 mm in diameter (Conexao Sistema de Protese Ltda, Sao Paulo, Brazil) and their respective abutments were screw connected and torqued to 20 N cm(-1). The implants were mounted in epoxy assuring an implant long-axis position perpendicular to the vertical axis. Each implant was grounded through its thickness parallel to implant long-axis at six different distance interval. Implant-abutment gap distances were recorded along the implant-abutment region for each section. Individual measurements were related to their radial position through trigonometric inferences. A sixth degree polynomial line fit approach determined radial adaptation patterns for each implant. Micrographs along implant sections showed a approximately 300 mum length implant-abutment engagement region. All implants presented communication between external and internal regions through connection gaps and inaccurate implant-abutment alignment. Average gap distances were not significantly different between implants (P > 0.086). Polynomial lines showed implant-abutment gap values below 10 mum from 0 mum to approximately 250 mum of the implant-abutment engagement region. Gap distances significantly increased from approximately 250 mum to the outer radius of the implant-abutment engagement region. The technique described provided a broader scenario of the implant-abutment gap adaptation compared with previous work concerning implant-abutment gap determination, and should be considered for better understanding mechanical aspects or biological effects of implant-abutment adaptation on peri-implant tissues.     

Mechanistic study of 1,1-dimethylhydrazine transformation over Pt/SiO2 catalyst

Catalytic oxidation of 1,1-dimethylhydrazine (UDMH) with molecular oxygen over Pt/SiO₂ was studied by in situ FTIR spectroscopy coupled with online MS monitoring of the gas phase. An unusual two-step oxidation process was detected in experiments with the pulse UDMH feeding: initial UDMH oxidation over a fresh platinum surface quickly terminates due to the blockage of active sites; a time-separated second oxidation step corresponds to combustion of the surface residue. This residue consists of C N nitrile groups formed via decomposition of the products of non-oxidative UDMH conversion, such as dimethylamine. The two-step oxidation picture is observed over a broad range of reaction temperatures and oxygen to UDMH ratios.

Unusual two-step oxidation process of 1,1-dimethylhydrazine on Pt/SiO₂ catalyst.     

The Cretaceous superchron geodynamo: observations near the tangent cylinder

If relationships exist between the frequency of geomagnetic reversals and the morphology, secular variation, and intensity of Earth's magnetic field, they should be best expressed during superchrons, intervals tens of millions of years long lacking reversals. Here we report paleomagnetic and paleointensity data from lavas of the Cretaceous Normal Polarity Superchron that formed at high latitudes near the tangent cylinder that surrounds the solid inner core. The time-averaged field recorded by these lavas is remarkably strong and stable. When combined with global results available from lower latitudes, these data define a time-averaged field that is overwhelmingly dominated by the axial dipole (octupole components are insignificant). These observations suggest that the basic features of the geomagnetic field are intrinsically related. Superchrons may reflect times when the nature of core-mantle boundary heat flux allows the geodynamo to operate at peak efficiency.     

Evaluation of Mechanical and Electrical Performance of Aging Resistance ZTA Composites Reinforced with Graphene Oxide Consolidated by SPS

This paper presents a study of Al₂O₃–ZrO₂ (ZTA) nanocomposites with different contents of reduced graphene oxide (rGO). The influence of the rGO content on the physico-mechanical properties of the oxide composite was revealed. Graphene oxide was obtained using a modified Hummers method. Well-dispersed ZTA-GO nanopowders were produced using the colloidal processing method. Using spark plasma sintering technology (SPS), theoretically dense composites were obtained, which also reduced GO during SPS. The microstructure, phase composition, and physico-mechanical properties of the sintered composites were studied. The sintered ZTA composite with an in situ reduced graphene content of 0.28 wt.% after the characterization showed improved mechanical properties: bending strength was 876 ± 43 MPa, fracture toughness—6.8 ± 0.3 MPa·m^1/2 and hardness—17.6 ± 0.3 GPa. Microstructure studies showed a uniform zirconia distribution in the ZTA ceramics. The study of the electrical conductivity of reduced graphene oxide-containing composites showed electrical conductivity above the percolation threshold with a small content of graphene oxide (0.28 wt.%). This electrical conductivity makes it possible to produce sintered ceramics by electrical discharge machining (EDM), which significantly reduces the cost of manufacturing complex-shaped products. Besides improved mechanical properties and EDM machinability, 0.28 wt.% rGO composites demonstrated high resistance to hydrothermal degradation.     

Correction: The structural and luminescence properties of plexcitonic structures based on Ag2S/l-Cys quantum dots and Au nanorods

Correction for ‘The structural and luminescence properties of plexcitonic structures based on Ag₂S/l-Cys quantum dots and Au nanorods’ by Irina G. Grevtseva et al., RSC Adv., 2022, 12, 6525–6532, DOI: 10.1039/D1RA08806H.

The authors regret the omission of a funding acknowledgement in the original article. This acknowledgement is given below.This study was supported by the Ministry of Science and Higher Education of the Russian Federation under Agreement N 075-15-2021-1351 as part of the structural analysis of colloidal Ag₂S/l-Cys QDs and Au NRs.The Royal Society of Chemistry apologises for these errors and any consequent inconvenience to authors and readers.     

肢带型肌营养不良的MRI表现

目的 观察肢带型肌营养不良的MRI表现。方法 回顾性分析7例经临床及病理检查确诊为肢带型肌营养不良患者的MRI资料,观察双侧大腿肌群脂肪沉积与炎性水肿情况,采用4分法进行评价。并进行统计学分析。结果 肢带型肌营养不良患者大腿肌群MRI均可见脂质沉积和炎性水肿性改变。不同肌肉间脂肪沉积(χ²=75.596,P<0.01)与炎性水肿差异均有统计学意义(χ²=41.368,P<0.01),双侧大腿肌群间脂肪沉积与炎性水肿差异均无统计学意义(P均>0.05)。结论 肢带型肌营养不良患者大腿肌群MRI信号特点及分布具有一定特征,MR检查有助于疾病的诊断。     

Prevalence of Candida spp., xerostomia,and hyposalivation in oral lichen planus – A controlled study

Objective

To determine the frequency of Candida spp., xerostomia, and salivary flow rate (SFR) in three different groups: patients with OLP (OLP group), patients with oral mucosal lesions other than OLP (non‐OLP group), and subjects without oral mucosal lesions (control group).

Material and methods

Xerostomia as well as SFR was investigated in the three groups. Samples for isolation of Candida spp. were collected from OLP lesions (38 patients), non‐OLP lesions (28 patients), and healthy subjects (32 subjects).

Results

There was no statistically significant difference regarding the frequency of xerostomia and hyposalivation among the three groups (P > 0.05). A higher prevalence for colonization by Candida spp. was found in the healthy subject as compared to that of patients with OLP (P = 0.03) and non‐OLP (P = 0.02) groups. Low SFR was not a factor for colonization by Candida spp.

Conclusions

Xerostomia and hyposalivation occur with similar frequency in subjects with and without oral lesions; also, the presence of oral lesions does not increase the susceptibility to colonization by Candida spp. It seems that any study implicating Candida spp. in the malignant transformation of oral lesions should be carried out mostly on a biochemical basis, that is, by testing the capability of Candida spp. to produce carcinogenic enzyme.     

Formation of Micro- and Nanostructures on the Nanotitanium Surface by Chemical Etching and Deposition of Titania Films by Atomic Layer Deposition (ALD)

In this study, an integrated approach was used for the preparation of a nanotitanium-based bioactive material. The integrated approach included three methods: severe plastic deformation (SPD), chemical etching and atomic layer deposition (ALD). For the first time, it was experimentally shown that the nature of the etching medium (acidic or basic Piranha solutions) and the etching time have a significant qualitative impact on the nanotitanium surface structure both at the nano- and microscale. The etched samples were coated with crystalline biocompatible TiO₂ films with a thickness of 20 nm by Atomic Layer Deposition (ALD). Comparative study of the adhesive and spreading properties of human osteoblasts MG-63 has demonstrated that presence of nano- and microscale structures and crystalline titanium oxide on the surface of nanotitanium improve bioactive properties of the material.