Evaluation of the Effect of the Loading Time on the Microtensile Bond Strength of Various Restorative Materials Bonded to Silver Diamine Fluoride-Treated Demineralized Dentin

The aim of this study was to evaluate the effect of immediate versus delayed loading times on the microtensile bond strength (μTBS) of restorative materials, including resin-based composite (RBC), resin-modified glass ionomer cement (RMGIC) and glass ionomer cement (GIC), that were bonded to silver diamine fluoride (SDF)-treated demineralized dentin. Ninety caries-free extracted premolar teeth were assigned to three groups (n = 30) loaded with RBC, RMGIC and GIC restorative materials. Each group was further divided into three subgroups (n = 10): subgroup A (control specimens), immediate loading of the restorative material on sound dentin; subgroup B, demineralized dentin, SDF treatment and immediate loading of the restorative material; and subgroup C, demineralized dentin, SDF treatment and restorative material loading a week later. One-way ANOVA and Tukey’s post-hoc tests were performed to compare the μTBS values. The RBC exhibited the highest µTBS, followed by RMGIC and GIC. Multiple comparisons showed an increase in the µTBS in the delayed loading groups irrespective of the restorative material used. The majority of the failure modes were adhesive. Delayed loading of RMGIC for 1 week after SDF application showed significantly higher µTBS than that of immediate loading.     

A Comparative Study to Evaluate the Essential Work of Fracture to Measure the Fracture Toughness of Quasi-Brittle Material

In the present work, three different woven composite laminates were fabricated using the hand lay-up method. The woven reinforcement fibres were carbon fibres (CFRP), glass fibres (GFRP-W) and (GFRP-R) in combination with epoxy resin. Then, the central notch specimen tensile test (CNT) was used to measure the fracture toughness and the corresponding surface release energy (GIC). Then, the data were compared with the essential work of fracture (we) values based on the stored energy of the body to obtain a new standard fracture toughness test for composite laminates using relatively simple techniques. In addition to an extended finite element model, XFEM was implemented over a central notch specimen geometry to obtain a satisfactory validation of the essential work of fracture concepts. Therefore, the average values of (GIC) were measured with CNT specimens 25.15 kJ/m², 32.5 kJ/m² and 20.22 kJ/m² for CFRP, GFRP-W and GFRP-R, respectively. The data are very close as the percentage error for the surface release energy measured by the two methods was 0.83, 4.6 and 5.16 for carbon, glass and random fibre composite laminates, respectively. The data for the fracture toughness of XFEM are also very close. The percentage error is 4.6, 5.25 and 2.95 for carbon, glass and random fibre composite laminates, respectively. Therefore, the fundamental work of the fracture concept is highly recommended as a fracture toughness test for composite laminates or quasi-brittle Material.     

Innovative pulmonary targeting of terbutaline sulfate-laded novasomes for non-invasive tackling of asthma: statistical optimization and comparative in vitro/in vivo evaluation

Asthma represents a globally serious non-communicable ailment with significant public health outcomes for both pediatrics and adults triggering vast morbidity and fatality in critical cases. The β₂-adrenoceptor agonist, terbutaline sulfate (TBN), is harnessed as a bronchodilator for monitoring asthma noising symptoms. Nevertheless, the hepatic first-pass metabolism correlated with TBN oral administration mitigates its clinical performance. Likewise, the regimens of inhaled TBN dosage forms restrict its exploitation. Consequently, this work is concerned with the assimilation of TBN into a novel non-phospholipid nanovesicular paradigm termed novasomes (NVS) for direct and effective TBN pulmonary targeting. TBN-NVS were tailored based on the thin film hydration method and Box-Behnken design was applied to statistically optimize the formulation variables. Also, the aerodynamic pattern of the optimal TBN-NVS was explored via cascade impaction. Moreover, comparative pharmacokinetic studies were conducted using a rat model. TBN elicited encapsulation efficiency as high as 70%. The optimized TBN-NVS formulation disclosed an average nano-size of 223.89 nm, ζ potential of −31.17 mV and a sustained drug release up to 24 h. Additionally, it manifested snowballed in vitro lung deposition behavior in cascade impactor with a fine particle fraction of 86.44%. In vivo histopathological studies verified safety of intratracheally-administered TBN-NVS. The pharmacokinetic studies divulged 3.88-fold accentuation in TBN bioavailability from the optimum TBN-NVS versus the oral TBN solution. Concisely, the results proposed that NVS are an auspicious nanovector for TBN pulmonary delivery with integral curbing of the disease owing to target specificity.     

Knowledge and attitudes of physicians toward forensic psychiatry in Saudi Arabia

Objectives:To assess the knowledge and attitudes of physicians of different specialties, including psychiatrists, regarding forensic psychiatry to determine whether further modification or training is needed in the psychiatry residency program.Methods:This cross-sectional study was carried out using a 3-page, 3-section questionnaire containing 21 questions disseminated randomly online via Google forms using social media platforms. The 482 participants were residents, specialists, and consultants of various specialties. The study was conducted between September 2020 and August 2021 in various tertiary hospitals across Saudi Arabia.Results:A total of 482 physicians were recruited. The most common age group was 25-35 years, comprising mostly Saudis (62.4%). Based on the results, “poor” and “good” knowledge of forensic psychiatry was identified in 89% and 11% of the physicians, while “negative” and “positive” attitudes were identified in 16.4% and 83.6% of the physicians.Conclusion:Although the perspective of physicians regarding forensic psychiatry was found to be positive, their knowledge of the topic seems to be lacking.     

Forecasting the Post-Pandemic Effects of the SARS-CoV-2 Virus Using the Bullwhip Phenomenon Alongside Use of Nanosensors for Disease Containment and Cure

The COVID-19 pandemic has the tendency to affect various organizational paradigm alterations, which civilization hasyet to fully comprehend. Personal to professional, individual to corporate, and across most industries, the spectrum of transformations is vast. Economically, the globe has never been more intertwined, and it has never been subjected to such widespread disruption. While many people have felt and acknowledged the pandemic’s short-term repercussions, the resultant paradigm alterations will certainly have long-term consequences with an unknown range and severity. This review paper aims at acknowledging various approaches for the prevention, detection, and diagnosis of the SARS-CoV-2 virus using nanomaterials as a base material. A nanostructure is a material classification based on dimensionality, in proportion to the characteristic diameter and surface area. Nanoparticles, quantum dots, nanowires (NW), carbon nanotubes (CNT), thin films, and nanocomposites are some examples of various dimensions, each acting as a single unit, in terms of transport capacities. Top-down and bottom-up techniques are used to fabricate nanomaterials. The large surface-to-volume ratio of nanomaterials allows one to create extremely sensitive charge or field sensors (electrical sensors, chemical sensors, explosives detection, optical sensors, and gas sensing applications). Nanowires have potential applications in information and communication technologies, low-energy lightning, and medical sensors. Carbon nanotubes have the best environmental stability, electrical characteristics, and surface-to-volume ratio of any nanomaterial, making them ideal for bio-sensing applications. Traditional commercially available techniques have focused on clinical manifestations, as well as molecular and serological detection equipment that can identify the SARS-CoV-2 virus. Scientists are expressing a lot of interest in developing a portable and easy-to-use COVID-19 detection tool. Several unique methodologies and approaches are being investigated as feasible advanced systems capable of meeting the demands. This review article attempts to emphasize the pandemic’s aftereffects, utilising the notion of the bullwhip phenomenon’s short-term and long-term effects, and it specifies the use of nanomaterials and nanosensors for detection, prevention, diagnosis, and therapy in connection to the SARS-CoV-2.     

Investigation of Structural,Physical, and Attenuation Parameters of Glass: TeO2-Bi2O3-B2O3-TiO2-RE2O3 (RE: La,Ce, Sm,Er, and Yb), and Applications Thereof

A novel series of glass, consisting of B₂O₃, Bi₂O₃, TeO₂, and TiO₂ (BBTT) containing rare earth oxide RE₂O₃, where RE is La, Ce, Sm, Er, and Yb, was prepared. We investigated the structural, optical, and gamma attenuation properties of the resultant glass. The optical energy bands, the linear refractive indices, the molar refractions, the metallization criteria, and the optical basicity were all determined for the prepared glass. Furthermore, physical parameters such as the density, the molar volume, the oxygen molar volume, and the oxygen packing density of the prepared glass, were computed. Both the values of density and optical energy of the prepared glass increased in the order of La₂O₃, Ce₂O₃, Sm₂O₃, Er₂O₃, and then Yb₂O₃. In addition, the glass doped with Yb₂O₃ had the lowest refractive index, electronic polarizability, and optical basicity values compared with the other prepared glass. The structures of the prepared glass were investigated by the deconvolution of infrared spectroscopy, which determined that TeO₄, TeO₃, BO₄, BO₃, BiO₆, and TiO₄ units had formed. Furthermore, the structural changes in glass are related to the ratio of the intensity of TeO₄/TeO₃, depending on the type of rare earth. It is also clarified that the resultant glass samples are good attenuators against low-energy radiation, especially those that modified by Yb₂O₃, which exhibited superior shielding efficiency at energies of 622, 1170, and 1330 keV. The optical and gamma ray spectroscopy results of the prepared glass show that it is a good candidate for nonlinear optical fibers, laser solid material, and optical shielding protection.     

Recent Advances in Adsorptive Nanocomposite Membranes for Heavy Metals Ion Removal from Contaminated Water: A Comprehensive Review

Water contamination is one of the most urgent concerns confronting the world today. Heavy metal poisoning of aquatic systems has piqued the interest of various researchers due to the high toxicity and carcinogenic consequences it has on living organisms. Due to their exceptional attributes such as strong reactivity, huge surface area, and outstanding mechanical properties, nanomaterials are being produced and employed in water treatment. In this review, recent advances in the use of nanomaterials in nanoadsorptive membrane systems for wastewater treatment and heavy metal removal are extensively discussed. These materials include carbon-based nanostructures, metal nanoparticles, metal oxide nanoparticles, nanocomposites, and layered double hydroxide-based compounds. Furthermore, the relevant properties of the nanostructures and the implications on their performance for water treatment and contamination removal are highlighted. The hydrophilicity, pore size, skin thickness, porosity, and surface roughness of these nanostructures can help the water permeability of the nanoadsorptive membrane. Other properties such as surface charge modification and mechanical strength can improve the metal adsorption effectiveness of nanoadsorptive membranes during wastewater treatment. Various nanocomposite membrane fabrication techniques are also reviewed. This study is important because it gives important information on the roles of nanomaterials and nanostructures in heavy metal removal and wastewater treatment.     

Calcified tissue of fetal origin in utero

Hysteroscopic examination in a woman with secondary infertility revealed calcified tissue in the uterine cavity. Histopathological examination demonstrated mature bone. Genetic analysis supports its fetal origin.     

Meroditerpenoids and derivatives from the brown alga Cystoseira baccata and their antifouling properties

The brown alga Cystoseira baccata harvested along the Atlantic coasts of Morocco yielded seven new meroditerpenoids (1-4) and derivatives (5-7), whose chemical structures were elucidated mainly by 2D NMR and mass spectrometry. Surprisingly, for all these compounds, which possess a bicyclo[4.3.0]nonane ring system, a trans fusion of the bicyclic system was deduced by stereochemical studies even though such compounds isolated from Cystoseira species are known to have a typical cis orientation for the bridgehead methyls. The antifouling and antibacterial activities of compounds 1-5 and 7 were evaluated, as well as their toxicity toward nontarget species. Compounds 4, 5, and 7 showed antifouling activities against growth of microalgae, macroalgal settlement, and mussel phenoloxidase activity, while being nontoxic to larvae of sea urchins and oysters.