Stresses on the cervical column associated with vertical occlusal alteration

The biomechanical effects on cervical vertebral columns (C1-C7) during mastication were calculated using a three-dimensional (3D) finite element method. To verify the biomechanical influences of vertical occlusal alteration to the cervical column, three finite element models (FEM) showing a normal (model A), a steep (model B), and a flat occlusal plane (model C) were constructed. The occlusal stress distribution showed various patterns for the three models; the stress extended to the anterior area as the occlusal plane became steeper. The plots of the stresses on the mid sagittal section of the cervical columns showed different patterns for the three models; the stress converged at the odontoid process in models A and B, whereas the stresses at C7 in model B tended to decrease compared with model A. Concentrated stress was observed at C5 in model C, supporting the hypothesis that vertical occlusal alteration could influence stress distribution in the cervical columns.     

Depth of cure and hardness of an indirect composite polymerized with three laboratory curing units

This study determined the hardness and curing depth of a light-activated indirect composite polymerized with three laboratory light-polymerizing units for the purpose of comparing the curing performance of the three units. A light-activated composite material for indirect application (Vita Zeta) was polymerized with three light-polymerizing units equipped with the following light sources: 1) one halogen lamp and two fluorescent lamps (alpha-Light II); 2) three halogen lamps (Twinkle HLG); and 3) one metal halide lamp (Twinkle LI). Knoop hardness and curing depth were determined for groups of five specimens using standardized testing methods. The results were compared using analysis of variance (ANOVA) and Scheffé's S intervals (alpha = 0.05). The Knoop hardness number (KHN) generated with the halogen-fluorescent unit (12.5 KHN) was significantly (P < 0.05) lower than those produced by the halogen unit (13.9 KHN) and the metal halide unit (14.2 KHN). Of the three units, the halogen-fluorescent unit exhibited the lowest depth of cure. Both the hardness and curing depth of the composite were influenced by the laboratory polymerizing units employed.     

Reconstruction of a cranial bone defect with hydroxyapatite and free flap transfer.

The authors report a successful reconstruction of an extensive frontotemporal bone defect after craniotomy, which was complicated with infection and necessitated removal of frontal and temporal bones. The large frontotemporal bone defect was reconstructed using prefabricated hydroxyapatite blocks in combination with the free vastus lateralis muscle flap. The patient's functional and cosmetic restoration has been maintained for 10 months' follow-up.     

A scanning electron microscopic study of the contraction of vascular wall cells in dog dental pulp

Ultrastructural changes in vascular wall cells in dog dental pulp after removal of connective tissue components were studied by scanning electron microscopy following administration of norepinephrine (0.2 mg/kg). Contracted smooth-muscle cells were frequently seen in arterioles of all sizes. The surfaces of these cells were highly irregular with numerous evaginations and invaginations, varying considerably in configuration and size. Many evaginations ran longitudinally or obliquely to the long axis of the vessel. Some meandering evaginations were also observed as, rarely, were small spherical or bulbous projections. Spidery smooth-muscle cells frequently seen in the tunica media of terminal arterioles and thought to be primitive smooth-muscle cells exhibited fewer irregularities than the typical spindle-shaped smooth-muscle cells beneath them. Pericytes in the larger post-capillary venules (20 microns or larger in diameter) often showed evaginations and invaginations, mainly running parallel to the vessel axis. On the other hand, no surface irregularities could be seen in pericytes of either the smaller post-capillary venules (less than 20 microns in diameter) or the capillaries, although occasional evaginations running parallel to the vessel axis were noted on the outer surface of the endothelium.     

Strength and elastic modulus of fiber-reinforced composites used for fabricating FPDs

PURPOSE: The purpose of this study was to examine the flexural strength and elastic modulus of a new fiber-reinforced composite used for the fabrication of inlay-retained fixed partial dentures (FPD). MATERIALS AND METHODS: A total of six materials were used: Vectris, FibreKor, and an experimental material, BR-100, were the types of glass fiber preimpregnated with resin used for making the frameworks; Targis, Sculpture, and Estenia were used as the veneering composites. Five specimens of each material were prepared. Flexural strength and elastic modulus were determined using the three-point bending test. In addition, laminate specimens were fabricated by combination of the veneering composite and framework materials (Targis/Vectris, Sculpture/FibreKor, and Estenia/BR-100), and fracture loads of these specimens were determined. Laminate specimens were fabricated with three different framework thicknesses for Estenia/BR-100. RESULTS: Estenia had the greatest strength and highest modulus of elasticity of the veneering composites. All three framework materials had flexural strength values (567 to 686 MPa) more than three times as great as those of the veneering composites (132 to 193 MPa). Of the laminate specimens, the Estenia/BR-100 with a framework thickness of 1.0 mm had a fracture load more than 50% greater than Targis/Vectris and Sculpture/FibreKor. CONCLUSION: The combination of the experimental framework material BR-100 and the composite Estenia showed higher fracture loads than the other combinations tested.     

Immunohistochemical co-localization of lymphatics and blood vessels in oral squamous cell carcinomas

BACKGROUND: Differentiating lymphatic vessels from blood vessels is difficult, partly due to the lack of a specific method for identifying lymphatics. A new lymphatic vessel-reactive antibody, D2-40 has recently become commercially available. We examined the selectivity of D2-40 for lymphatics in oral neoplastic lesions for discrimination from blood vessels. METHODS: Formalin-fixed, paraffin-embedded sections of oral lymphangiomas (n = 3), oral hemangiomas (n = 7), and oral squamous cell carcinomas (OSCC, n = 46) were double immunostained with D2-40 and anti-CD34 monoclonal antibodies (MoAb) using ENVISION-polymer technique with 5-bromo-4-chloro-3-indoxyl-phosphate (BCIP)/nitroblue tetrazolium chloride (NBT) and 3,3'-diaminobenzidine (DAB) as color reagents, respectively. Results: In the oral lymphangiomas and hemangiomas D2-40 was detected in all lymphatics, while all blood vessels were positive for CD34. In OSCC, number of vessels for lymphatics (P < 0.01) and for blood vessels in the perineoplastic areas were significantly greater than those in intratumoral areas. CONCLUSIONS: These results indicate that lymphatic proliferation might be much more extensive in the peritumoral area than intratumoral.