Clinical Practice Guidelines for the Medical and Surgical Management of Primary Intracerebral Hemorrhage in Korea

The purpose of this clinical practice guideline (CPG) is to provide current and comprehensive recommendations for the medical and surgical management of primary intracerebral hemorrhage (ICH). Since the release of the first Korean CPGs for stroke, evidence has been accumulated in the management of ICH, such as intracranial pressure control and minimally invasive surgery, and it needs to be reflected in the updated version. The Quality Control Committee at the Korean Society of cerebrovascular Surgeons and the Writing Group at the Clinical Research Center for Stroke (CRCS) systematically reviewed relevant literature and major published guidelines between June 2007 and June 2013. Based on the published evidence, recommendations were synthesized, and the level of evidence and the grade of the recommendation were determined using the methods adapted from CRCS. A draft guideline was scrutinized by expert peer reviewers and also discussed at an expert consensus meeting until final agreement was achieved. CPGs based on scientific evidence are presented for the medical and surgical management of patients presenting with primary ICH. This CPG describes the current pertinent recommendations and suggests Korean recommendations for the medical and surgical management of a patient with primary ICH.     

Analysis of Microstructure Evolution and Mechanical Properties during Compression of Open-Cell Ni-Foams with Hollow Struts Using Micro-CT and FEM

Based on electron backscatter diffraction (EBSD), hollow structures of Ni foam struts fabricated by electroplating on a chemically removable template were observed. Three-dimensional (3D) pore structures of Ni foams were also obtained using X-ray computed tomography (CT), and microstructural features such as porosity, pore size and strut thickness were statistically quantified. Evolution of microstructure and mechanical properties during ex situ compression of open-cell Ni-foams was investigated based on X-ray CT, and experimental results were compared with predictions by the finite element method (FEM). 3D microstructures obtained by X-ray CT revealed that the stress drop started with the buckling of struts at the center of the Ni-foams. The flow stress increased after the buckling of the struts spreads to most of the regions. For effective simulation of the compressive deformation and determination of the microstructural evolution, small domains of interest were selected from the entire set of observed 3D microstructures based on X-ray CT, and struts of Ni foams with a hollow structure were simplified with relevant thin-solid struts. Numerical 3D modeling comprehensively disclosed that compression caused the transverse buckling of the struts, with the bending and buckling of struts thus reducing the stress. Thickness variation of the struts causes a change in the porosity of Ni-foams without a change in pore shape or connectivity. The overall range of strut thickness was from 59 to 133 μm, and the range of porosity values was from 80% to 93.7%. A stress drop was predicted with a decrease in the strut thickness or an increase in the porosity, as measured experimentally. It was also found that the stress drop contributed to an increase in the calculated energy absorption efficiency.     

A Study on the Mechanical Properties of an Automobile Part Additively Printed through Periodic Layer Rotation Strategies

In metal product manufacturing, additive manufacturing (AM) is a method that has the advantage of fabricating complex shapes and customized production, unlike existing machining methods. However, owing to the characteristics of the AM process, anisotropy of macrostructure occurs because of various causes such as the scan direction, melting, fusion, and cooling of the powdered material. The macrostructure anisotropy is realized from the scan direction, and when a single layer is stacked in one direction, it is expressed as orthogonal anisotropy. Here, the classical lamination theory is applied to simply calculate the individual orthotropic layers by superimposing them. Through this, the authors analyzed whether the mechanical properties of the product are isotropically expressed with a periodic layer rotation strategy. To determine if the mechanical properties can be reasonably considered to be isotropic, a shock absorber mount for a vehicle was manufactured by AM. The tensile and vibration test performed on the product was compared with the finite element analysis and experimental results. As a result of the comparison, it was confirmed that the macroscopically of the product was considered isotropic as the load-displacement diagram and the fracture location coincided, as well as the natural frequency and mode shape.     

CT and MR imaging features of adnexal torsion.

In adnexal torsion, the ovary, ipsilateral fallopian tube, or both twist with the vascular pedicle, resulting in vascular compromise. Unrelieved torsion is likely to cause hemorrhagic infarction as the degree of arterial occlusion increases. Therefore, early diagnosis is important to preserve the affected ovary. Adnexal torsion commonly accompanies an ipsilateral ovarian neoplasm or cyst but can also occur in normal ovaries, usually in children. Although ultrasonography is typically the initial emergent examination, computed tomography (CT) and magnetic resonance (MR) imaging may also be useful diagnostic tools. Common CT and MR imaging features of adnexal torsion include fallopian tube thickening, smooth wall thickening of the twisted adnexal cystic mass, ascites, and uterine deviation to the twisted side. Uncommon imaging findings in adnexal torsion that are specific to hemorrhagic infarction include hemorrhage in the thickened fallopian tube, hemorrhage within the twisted ovarian mass, and hemoperitoneum. Additional imaging findings that can suggest hemorrhagic infarction include eccentric smooth wall thickening exceeding 10 mm in a cystic ovarian mass converging on the thickened fallopian tube and lack of contrast enhancement of the internal solid component or thickened wall of the twisted ovarian mass. Early diagnosis can help prevent irreversible structural damage and may allow conservative, ovary-sparing treatment.     

Incidence Rate of Bee Venom Acupuncture Related Anaphylaxis: A Systematic Review

Background: Bee venom acupuncture (BVA) is an effective treatment method for various diseases. Bee venom, however, can cause adverse effects, even rarely including life-threatening anaphylaxis, so safety-related evidence is required. In this study, we systematically estimated the incidence rate of anaphylaxis in response to BVA. Methods: We searched eight databases (MEDLINE (Pubmed), EMBASE, Cochrane Central Register of Controlled, KISS, KMBASE, Koreamed, OASIS, and NDSL) and systematically reviewed the articles that met the inclusion/exclusion criteria. Results: Among 225 potentially relevant articles, 49 were selected for this study. The overall incidence rate of anaphylaxis in response to BVA was 0.045% (95% CI 0.028–0.062). Women (0.083%, 95% CI 0.010–0.157) showed a higher incidence rate than men (0.019%, 95% CI −0.018 to 0.055), while the incidence for patients who had a skin test conducted (0.041%, 95% CI 0.011–0.072) was not significantly different compared to that obtained for patients for which there was no information about a skin test (0.047%, 95% CI 0.026–0.067). The publication year affected the incidence rate: it was highest before 1999 (1.099%, 95% CI −1.043 to 3.241), lower between 2000 and 2009 (0.049%, 95% CI 0.025–0.073), and lowest between 2010 and 2021 (0.037% 95% CI 0.014–0.060). Conclusions: In this study, we provide reference data about risk size and factors of BVA-related anaphylaxis, which is essentially required for BVA application in clinics.     

Quality of Life Comparison Between Open and Retroperitoneal Video-Assisted Minilaparotomy Surgery for Kidney Donors

This study compared open and video-assisted minilaparotomy surgery in live kidney donors for quality of life (QoL), pain, cosmesis, and recovery. Between January 2003 and March 2006, we reviewed data from 205 patients who underwent live-donor nephrectomy: 116 by video-assisted minilaparotomy and 89 by open surgery. Pain and satisfaction were evaluated using scales from 1 to 10, and QoL, with the 36-item Short Form questionnaire. Hospital stay was significantly shorter among the video-assisted (5.1 ± 1.6 days) than the open group (6.9 ± 1.3 days; P < .01). Time to resumption of walking without difficulty and normal activity was significantly shorter among the video-assisted than the open group (P < .01). The video-assisted group showed better QoL scores in 6 of 8 QoL categories, including physical role (P < .01), bodily pain (P < .01), general health (P < .01), vitality (P < .01), emotional health (P < .01), and mental health (P < .01). Patients in the video-assisted group (score, 7.3 ± 2.4) were more satisfied with the cosmetic outcome than those in the open group (score, 5.1 ± 3.0; P < .01). In conclusion, donors who underwent nephrectomy via video-assisted minilaparotomy showed better outcomes regarding pain, convalescence, cosmesis, and QoL than those who underwent open surgery.