Effects of low power red laser on induced-dental caries in rats

OBJECTIVE: The purpose of this study was to investigate the effects of low power red laser associated with acidulated phosphate fluoride on the development of induced-dental caries in rats. DESIGN: Dental caries were induced in molars of 40 rats divided into five groups: control group (CG), the teeth were not submitted to any treatment; laser group (LG), teeth were irradiated with a low power red laser (LPRL), power of 30 mW and dose of 5 J/cm(2); fluoride group (FG), teeth were treated with topical acidulated phosphate fluoride (APF) 1.23% applied for 4 min; laser+fluoride group (LFG), teeth were irradiated with LPRL followed by APF; fluoride+laser group (FLG), teeth were treated with APF followed by LPRL. The animals were killed after 48 days, and the first and second molars were extracted to analyze the caries lesion area, microhardness, and calcium and phosphorus ratio. RESULTS: There were no statistical differences among FG, LFG, and FLG regarding to caries area and microhardness, although the caries area were smaller in LFG. Ca/P ratio did not show significant differences among all groups. CONCLUSIONS: Although LPRL before APF application appeared to diminish the caries progression, LPRL did not present any additional benefit compared with acidulated phosphate fluoride on the prevention of induced-dental caries in rats.     

The Caries Assessment Spectrum and Treatment (CAST) index: rational and development

Serious difficulties in reporting results were encountered when using ICDAS II and PUFA separately in an epidemiological survey in a child population in Brazil. That necessitated the development of a comprehensive but pragmatic caries assessment index. This publication describes the rationale, development and content of a novel caries assessment index. Strengths and weaknesses of ICDAS II, PUFA and other indices were analysed. The novel caries index developed for use in epidemiological surveys is termed 'Caries Assessment Spectrum and Treatment' (CAST). 'Spectrum' indicates what is considered the main strength of the new index - its usefulness in describing the complete range of stages of carious lesion progression: from no carious lesion, through caries protection (sealant) and caries cure (restoration) to lesions in enamel and dentine, and the advanced stages of carious lesion progression in pulpal and tooth-surrounding tissue. CAST combines elements of the ICDAS II and PUFA indices, and the M- and F-components of the DMF index. A DMF score can easily be calculated from the CAST score, thereby enabling retention of the use of existing DMF scores. The CAST index for use in epidemiological surveys is very promising. It should be validated and its reliability and usefulness be tested in different age groups in different countries and cultures.     

Synthesis and biocompatibility of an experimental glass ionomer cement prepared by a non-hydrolytic sol-gel method

The aims of this study were to demonstrate the synthesis of an experimental glass ionomer cement (GIC) by the non-hydrolytic sol-gel method and to evaluate its biocompatibility in comparison to a conventional glass ionomer cement (Vidrion R). Four polyethylene tubes containing the tested cements were implanted in the dorsal region of 15 rats, as follows: GI - experimental GIC and GII - conventional GIC. The external tube walls was considered the control group (CG). The rats were sacrificed 7, 21 and 42 days after implant placement for histopathological analysis. A four-point (I-IV) scoring system was used to graduate the inflammatory reaction. Regarding the experimental GIC sintherization, thermogravimetric and x-ray diffraction analysis demonstrated vitreous material formation at 110oC by the sol-gel method. For biocompatibility test, results showed a moderate chronic inflammatory reaction for GI (III), severe for GII (IV) and mild for CG (II) at 7 days. After 21 days, GI presented a mild reaction (II); GII, moderate (III) and CG, mild (II). At 42 days, GI showed a mild/absent inflammatory reaction (II to I), similar to GII (II to I). CG presented absence of chronic inflammatory reaction (I). It was concluded that the experimental GIC presented mild/absent tissue reaction after 42 days, being biocompatible when tested in the connective tissue of rats.     

Cervical impalement injury

Impacted injuries of the head and neck are uncommon. Associated injuries can be present and can be a serious problem. We present an unusual clinical case and discuss the management of this complex injury. Head and neck injuries deserve special attention because of their enormous functional and esthetic significance. Contusion, abrasion, retained foreign bodies, laceration, and avulsion are some of the most frequent injuries. Impalement injuries are not so common. These lesions combine aspects of blunt and penetrating trauma and usually result from penetration by a large, rigid, blunt-tipped object that traverses a certain body area in a through-and-through fashion and often remains in situ at the time of presentation. There have been many case reports describing these injuries in the trunk and extremities; however, cases of head and neck impalement are still lacking in number. A case of an unusual cervical impalement is presented, together with a discussion of the management of this complex injury.     

Microleakage at sealant/enamel interface of primary teeth: effect of Er:YAG laser ablation of pits and fissures

PURPOSE: The objective of this study was to assess microleakage at sealant/enamel interface after treatment of primary teeth occlusal surfaces with 3 etching techniques. METHODS: Thirty sound primary molars were randomly assigned to 3 groups (N = 10): (1) group I = acid etching for 30 seconds; (2) group II = Er:YAG laser (120 mJ; 4 Hz) plus acid-etching; and (3) group III = Er:YAG laser (120 mJ; 4 Hz). Pits and fissures were sealed with a resin-based sealant (Fluroshield, Dentsply/Caulk). Teeth were isolated, thermocycled, immersed in a 0.2% rhodamine B solution for 24 hours, and serially sectioned. Cuts were analyzed for leakage using an optical microscope connected to a video camera. The images were digitized, and a specific software (Axion Vision) assessed microleakage quantitatively (millimeters). The sealant extension on buccal/lingual cusp heights was measured separately, and the percentage of dye penetration along enamel/sealant interface, in relation to the sealant extension, was calculated. Means of dye penetration were: (1) group I = 2%(+/- 3.75); (2) group II = 2%(+/- 3.38); and (3) group III = 4%(+/- 6.26). Data were submitted to ANOVA and Tukey test. RESULTS: A statistically significant difference (P < .05) was observed between the nonetched lased specimens (group III) and those in the other groups. No significant difference (P >.05) was found between the acid-etched and lased/acid-etched groups (I and II). Fissures prepared with Er:YAG laser alone showed the highest degree of microleakage. All specimens exhibted some degree of leakage. CONCLUSIONS: Laser irradiation did not eliminate the need for acid etching enamel prior to the placement of a pit-and-fissure sealant. The ablation of pits and fissures with an Er:YAG laser device did not yield significantly better marginal sealing at primary enamel/sealant interface, compared to conventional acid etching.     

Cytotoxicity of denture base acrylic resins: a literature review

Acrylic resins are widely used in the fabrication of denture bases and have been shown to be cytotoxic as a result of substances that leach from the resin. The primary eluate is residual monomer. Numerous reports suggest that residual monomer may be responsible for mucosal irritation and sensitization of tissues. This information is important, not only to assess the biologic effects of such materials, but also to enable a comparison among the different polymerization methods, thus assisting the clinician in selecting a material with minimal cytotoxicity. This article reviews the literature published from 1973 to 2000, selected by use of a Medline search, associated with cytotoxic effects usually ascribed to acrylic denture base materials.     

Surgical planning for resection of an ameloblastoma and reconstruction of the mandible using a selective laser sintering 3D biomodel

Ameloblastoma is a benign locally aggressive infiltrative odontogenic lesion. It is characterized by slow growth and painless swelling. The treatment for ameloblastoma varies from curettage to en bloc resection, and the reported recurrence rates after treatment are high; the safety margin of resection is important to avoid recurrence. Advances in technology brought about great benefits in dentistry; a new generation of computed tomography scanners and 3-dimensional images enhance the surgical planning and management of maxillofacial tumors. The development of new prototyping systems provides accurate 3D biomodels on which surgery can be simulated, especially in cases of ameloblastoma, in which the safety margin is important for treatment success. A case of mandibular follicular ameloblastoma is reported where a 3D biomodel was used before and during surgery.