Dual-Scale Porosity Alumina Structures Using Ceramic/Camphene Suspensions Containing Polymer Microspheres

This study demonstrates the utility of thermo-regulated phase separable alumina/camphene suspensions containing poly(methyl methacrylate) (PMMA) microspheres as porogens for the production of multi-scale porosity structures. The homogeneous suspension prepared at 60 °C could undergo phase separation during freezing at room temperature. This process resulted in the 3D networks of camphene crystals and alumina walls containing PMMA microspheres. As a consequence, relatively large dendritic pores with several tens of microns size could be created as the replica of frozen camphene crystals. In addition, after the removal of PMMA microspheres via heat-treatment, micron-sized small spherical pores could be generated in alumina walls. As the PMMA content with respect to the alumina content increased from 0 vol% to 40 vol%, while the camphene content in the suspensions was kept constant (70 vol%), the overall porosity increased from 45.7 ± 0.5 vol% to 71.4 ± 0.5 vol%. This increase in porosity is attributed to an increase in the fraction of spherical pores in the alumina walls. Thus, compressive strength decreased from 153 ± 18.3 MPa to 33 ± 7.2 MPa. In addition, multi-scale porosity alumina objects with a honeycomb structure comprising periodic hexagonal macrochannels surrounded by dual-scale porosity walls were constructed using a 3D plotting technique.     

Three-Point Bending Properties of Hybrid Multi-Materials Using Adhesive Bonding Dependent on Strength Difference between Steel and Aluminum

The mechanical behaviors of two multi-materials, DP590 (steel sheet)–A356 (cast aluminum alloy) and SS330 (steel sheet)–A5052 (aluminum sheet), were studied. A structural adhesive was used for the joining of steel and aluminum at adhesion strengths of 10, 22, and 30 MPa. To demonstrate that the three-point bending properties depend on the difference in strength between steel and aluminum and adhesion strength, optical microscopy (OM), scanning electron microscopy (SEM), and finite-element analysis (FEA) were performed. According to the results of the bending tests on both multi-materials under the same stacking conditions, the flexural stress increased with the improvement in the adhesion strength until interface separation or aluminum fracture. At the same adhesion strength, the DP590 (lower)–A356 (upper) and SS330 (upper)–A5052 (lower) configurations exhibited a tendency to decrease in the sudden stress drop due to aluminum fracture and interface separation. The bending results were analyzed through the FEA and the stress distribution as a function of the stacking and adhesion strength was confirmed.     

Exploration of Zero-Valent Iron Stabilized Calcium–Silicate–Alginate Beads’ Catalytic Activity and Stability for Perchlorate Degradation

Perchlorate contamination in groundwater poses a serious threat to human health, owing to its interference with thyroid function. The high solubility and poor adsorption of perchlorate ions make perchlorate degradation a necessary technology in groundwater contaminant removal. Here, we demonstrate the perchlorate degradation by employing nano zero-valent iron (nZVI) embedded in biocompatible silica alginate hybrid beads fabricated using calcium chloride (1 wt%) as a crosslinker. The concentration of precursors (sodium alginate, sodium silicate) for bead formation was standardized by evaluating the thermal stability of beads prepared at different sodium silicate and alginate concentrations. Thermal degradation of silica alginate hybrid samples showed a stepwise weight loss during the thermal sweep, indicating different types of reactions that occur during the degradation process. The formation of the silica alginate hybrid structure was confirmed by FT-IR spectroscopy. Scanning electron microscopy (SEM) data revealed the surface morphology of silica alginate hybrid changes by varying sodium silicate and alginate concentrations. nZVI-loaded alginate–silicate polymer bead (nZVI-ASB) exhibited excellent perchlorate degradation efficiency by degrading 20 ppm of perchlorate within 4 h. Our study also showed the perchlorate degradation efficiency of nZVI-ASB is maximum at neutral pH conditions.     

The Administration of Panax Ginseng Berry Extract Attenuates High-Fat-Diet-Induced Sarcopenic Obesity in C57BL/6 Mice

Sarcopenia and obesity are serious health problems that are highly related to several metabolic diseases. Sarcopenic obesity, a combined state of sarcopenia and obesity, results in higher risks of metabolic diseases and even mortality than sarcopenia or obesity alone. Therefore, the development of therapeutic agents for sarcopenic obesity is crucial. C57BL/6 mice were fed with a high-fat diet (HFD) for 9 weeks. Then, mice were administered with Panax ginseng berry extract (GBE) for an additional 4 weeks, with continuous HFD intake. GBE significantly decreased the food efficiency ratio, serum lipid and insulin levels, adipose tissue weights, and adipocyte size. It significantly increased the grip strength, muscle masses, and myofiber cross-sectional area. It deactivated the protein kinase C (PKC) theta and zeta, resulting in activation of the phosphoinositide 3-kinase (PI3K)/protein kinase B (Akt) pathway, which is known to regulate muscle synthesis and degradation. Furthermore, it inhibited the production of inflammatory cytokines in the muscle tissue. GBE attenuated both obesity and sarcopenia. Thus, GBE is a potential agent to prevent or treat sarcopenic obesity.     

The preventive effect of systemic treatment with interferon-alpha2B for infertility from mumps orchitis.

OBJECTIVE: To evaluate the effect of interferon-alpha2B on mumps orchitis, often caused by postpubertal mumps and which can result in permanent testicular atrophy. PATIENTS AND METHODS: The study included 21 patients with mumps orchitis, treated between May 1990 and June 1997. Patients were randomly assigned into two groups: in group 1, 13 patients received therapy with interferon-alpha2B (3 x 10(6) IU per day) and group 2 did not, acting as controls. All were evaluated by measurements of testis size, mumps virus titre, hormone level and semen analysis. RESULTS: In group 1, the patients' symptoms resolved within 2-3 days and the volume of the testes returned to normal within 11 days; there was no testicular atrophy in any patient during the follow-up. However, asthenospermia continued to be detected in four patients (unilateral in two, bilateral in two). In group 2, the patients' symptoms resolved within 5-6 days and the volume of the testes returned to normal within 10 days; testes atrophied in three patients (unilateral in two, bilateral in one) during the follow-up. Asthenospermia continued in four patients (unilateral in two, bilateral in two). CONCLUSION: These results suggest that treatment with systemic interferon-alpha2B is effective in preventing testicular atrophy when combined with standard symptomatic treatment.     

Endoscopic resection of granular cell tumors in the gastrointestinal tract: a single center experience

Background

The frequency of granular cell tumors (GCTs) identified in the gastrointestinal tract has recently increased with the increased use of routine endoscopy. Endoscopic treatment is increasingly used as an alternative to traditional surgical resection, but there are few reports on the efficacy, safety, and long-term prognosis of endoscopic treatment for GCTs. The aim of this study was to assess the efficacy, safety, and long-term prognosis of endoscopic resection for the gastrointestinal GCTs.

Methods

We examined a total of 27 GCTs in 25 patients who were treated by endoscopic resection from January 2007 to February 2011. For endoscopic resection, endoscopic mucosal resection (EMR) or endoscopic submucosal dissection (ESD) was used.

Results

Twenty GCTs were located in the esophagus, 5 in the stomach, and 2 in the colon. The median size of the GCTs was 10 mm; the largest size, located in the ascending colon, measured 18 mm. EMR with a ligation device was performed in 20 cases, conventional EMR in 5 cases, and ESD in 2 cases. En bloc resection was performed in 25 cases (92.6 %), and endoscopic complete resection piecemeal resection was achieved in 25 cases (92.6 %). Pathologic complete resection was achieved in 22 lesions (81.5 %). Intraprocedural bleeding was noted in three patients, with no occurrence of perforation or postprocedure stricture. No recurrence was observed during the mean follow-up period of 15 months (range 9–31 months).

Conclusions

Endoscopic resection appears to be a safe and effective treatment for GCTs in the gastrointestinal tract.