Relationship Between Ligament Forces and Contact Forces in Balancing at Total Knee Surgery

BackgroundSpacer blocks, tensors, or instrumented tibial trials are current methods of balancing the knee during surgery but there are no current techniques for measuring ligament forces. Our goal was to study the relationship between the collateral ligament forces and the condylar contact forces to determine whether there was equivalence.MethodsA test rig was constructed modeling an artificial knee joint with collateral ligaments. The ligament forces as well as the lateral and medial tibial contact forces were measured during flexion for different positions of the femoral component on the femur, producing a set of forces for the simulated conditions. A regression analysis was used to study the correlation between the ligament and contact forces.ResultsThe combined medial and lateral ligament and contact forces showed a linear relation with a correlation coefficient of 0.98. For the medial and lateral sides separately, the correlations were 0.85 and 0.88, respectively, with more than 80% of points within a ±25% deviation from the linear relations. This deviation from the linear correlation is linked to differences in medial-lateral femoral-tibial contact point locations at different flexion angles.ConclusionWithin balancing accuracies generally achieved at surgery, the collateral ligament forces were linearly correlated to the condylar contact forces. These forces can also be equally correlated to the distraction forces as well as the moments at which condylar liftoff would occur from varus-valgus moments. This indicated a unification of the different balancing parameters, and hence such quantitative methods can be used interchangeably.     

Mutation screening of <Emphasis Type="Italic">mitofusin 2</Emphasis> in Charcot-Marie-Tooth disease type 2

Charcot-Marie-Tooth (CMT) disease is among the most common inherited neurological disorders. Mutations in the gene mitofusin 2 (MFN2) cause the axonal subtype CMT2A, which has also been shown to be associated with optic atrophy, clinical signs of first motor neuron involvement, and early onset stroke. Mutations in MFN2 account for up to 20–30% of all axonal CMT type 2 cases. To further investigate the prevalence of MFN2 mutations and to add to the genotypic spectrum, we sequenced all exons of MFN2 in a cohort of 39 CMT2 patients. We identified seven variants, four of which are novel. One previously described change was co-inherited with a PMP22 duplication, which itself causes the demyelinating form CMT1A. Another mutation was a novel in frame deletion, which is a rare occurrence in the genotypic spectrum of MFN2 characterized mainly by missense mutations. Our results confirm a MFN2 mutation rate of ~15–20% in CMT2.     

Evidence for a role of corrective eye movements during gaze fixation in saccade planning

In a three‐dimensional (3D) world most saccades are made towards visual targets that are located at different distances. We previously demonstrated that gaze shifts within 3D space consist of two stages: a target saccade followed by a corrective saccade during gaze fixation that directs the eyes to the physical target location. We proposed that, by accurately positioning the eyes on the visual object, the visual system maintains an orderly representation of the visual world. In this study we used a double saccade experiment to assess the function of corrective saccades in humans. We found that, when a corrective eye movement occurred during fixation on the first target point, the direction of the second saccade towards the next target point was accurate. When a corrective saccade was absent, a directional error of the second target saccade was observed. This finding, which cannot be explained by current models of eye movement control, supports the idea of a two‐step model in saccade programming. We suggest that the motor system sends a corollary discharge when programming a corrective saccade for maintaining an orderly representation of the visual world. In conclusion, our results indicate that corrective saccades have a role in programming target saccades within 3D space.     

Muscular adaptations and insulin‐like growth factor‐1 responses to resistance training are stretch‐mediated

Introduction: Modulation of muscle characteristics was attempted through altering muscle stretch during resistance training. We hypothesized that stretch would enhance muscle responses. Methods: Participants trained for 8 weeks, loading the quadriceps in a shortened (SL, 0–50° knee flexion; n = 10) or lengthened (LL, 40–90°; n = 11) position, followed by 4 weeks of detraining. Controls (CON; n = 10) were untrained. Quadriceps strength, vastus lateralis architecture, anatomical cross‐sectional area (aCSA), and serum insulin‐like growth factor‐1 (IGF‐1) were measured at weeks 0, 8, 10, and 12. Results: Increases in fascicle length (29 ± 4% vs. 14 ± 4%), distal aCSA (53 ± 12% vs. 18 ± 8%), strength (26 ± 6% vs. 7 ± 3%), and IGF‐1 (31 ± 6% vs. 7 ± 6%) were greater in LL compared with SL muscles (P < 0.05). No changes occurred in CON. Detraining decrements in strength and aCSA were greater in SL than LL muscles (P < 0.05). Conclusions: Enhanced muscle in vivo (and somewhat IGF‐1) adaptations to resistance training are concurrent with muscle stretch, which warrants its inclusion within training. Muscle Nerve 49 : 108–119, 2014     

Fijación lumbar posterior empleando el sistema de imagen quirúrgica O-arm: experiencia inicial

ObjectThe use of transpedicular screw fixation has been widely accepted for the treatment of degenerative and traumatic pathology of the lumbar spine. Complications of spinal instrumentation can be serious. Screw misplacement can result in unintended durotomy, nerve root and/or cauda equina injury. In comparison to fluoroscopy-assisted screw placement, computer-assisted image guidance has been shown to achieve overall higher rates of accuracy. The O-arm is able to obtain computed tomography (CT)-type images with multiplanar reconstruction. In this study we evaluated a cohort of patients who underwent posterior lumbar fusion with pedicle screws utilizing the O-arm imaging system.MethodsA retrospective review of 40 consecutive patients who underwent posterior lumbar fusion surgery with O-arm utilization, was performed. The study population included 14 males and 26 females. Age range was 39-85 years with an average of 63.8 years. Twenty one patients had degenerative lumbar stenosis (52.5%) and 19 had spondylolisthesis (47.5%). Intraoperative CT-images were obtained. The mean time for surgery and screw placement was assessed.ResultsA total of 252 pedicle screws were sited using O-arm navigation system, with a mean of 6.3 screws per patient (range 4-10). On the basis of intraoperative CT, 3 screws were redirected, representing a 98.81% accuracy rate.The mean duration of surgery was 157.2 (90-240) minutes and the mean time for screw placement was 7.13 (3.08-15) minutes per screw.Three patients (7.5%) developed superficial wound infections which were treated conservatively. No patients required a return to the operating room because of screw malposition.ConclusionThe use of intraoperative O-arm imaging system with computer-assisted navigation significantly increases the surgical accuracy and safety of pedicle screw placement in lumbar fusion surgery.     

Microflora associated with successful and failed orthodontic mini-implants

Objectives: Mini-implants are used for orthodontic bone anchorage. The reasons for a potential instability or loss of the mini-implants during treatment are multiple. Among other factors, colonization of implants with pathogenic bacteria is discussed. Therefore, the microflora associated with successful and failed mini-implants has been screened.
Material and methods: A total of 76 mini-implants collected from 25 patients were observed during regular orthodontic treatment. Bacterial samples of eight failed and – exemplarily – four successful (control) cases were subjected to a universal Bacteria -directed real-time quantitative polymerase chain reaction for quantification in combination with a microarray-based identification of 20 selected species.
Results: The failure rate in the present investigation was 10.5%. The bacterial analysis did not reveal any major difference in the total amount or species composition between control and failed mini-implants. However, Actinomyces viscosus was found in four (100%) and Campylobacter gracilis in three (75%) stable controls, whereas both species were rarely found (12.5%) in failed implants.
Conclusions: In the present study, the peri-implant sulcus surrounding failed orthodontic mini-implants did not show a specific aggressive bacterial flora.     

Progressive behavioral deficits in DJ-1-deficient mice are associated with normal nigrostriatal function

Loss-of-function mutations in the DJ-1 gene account for an autosomal recessive form of Parkinson's disease (PD). To investigate the physiological functions of DJ-1 in vivo, we generated DJ-1 knockout (DJ-1^−/−) mice. Younger (< 1 year) DJ-1^−/− mice were hypoactive and had mild gait abnormalities. Older DJ-1^−/−, however, showed decreased body weight and grip strength and more severe gait irregularities compared to wild-type littermates. The basal level of extracellular dopamine, evoked dopamine release and dopamine receptor D2 sensitivity appeared normal in the striatum of DJ-1^−/− mice, which was consistent with similar results between DJ-1^−/− and controls in behavioral paradigms specific for the dopaminergic system. An examination of spinal cord, nerve and muscle tissues failed to identify any pathological changes that were consistent with the noted motor deficits. Taken together, our findings suggest that loss of DJ-1 leads to progressive behavioral changes without significant alterations in nigrostriatal dopaminergic and spinal motor systems.