Clinical characteristics and cytokine biomarkers in patients with chronic graft-vs-host disease persisting seven or more years after diagnosis

Chronic graft-versus-host disease (cGVHD) is the leading late complication after allogeneic hematopoietic stem cell transplantation (HSCT). Many patients receive multiple lines of systemic therapy until cGVHD resolves, but about 15% remain on systemic treatment for more than 7 years after cGVHD diagnosis. This study describes the clinical and biological factors of patients who present with cGVHD persisting for ≥7 years (persistent cGVHD). Patients with persistent cGVHD (n = 38) and those with cGVHD for <1 year (early cGVHD) (n = 83) were enrolled in a prospective cross-sectional natural history study. Patients in the persistent cGVHD group were a median of 10.2 years from cGVHD diagnosis (range 7-27 years). Fifty-eight percent of persistent cGVHD patients (22/38) were receiving systemic immunosuppression, compared to 88% (73/83) in the early cGVHD group. In multivariable analysis, bone marrow (BM) stem cell source, presence of ENA autoantibodies, higher NIH lung score, higher platelet counts, and higher IgA levels were significantly associated with persistent cGVHD. A high sensitivity panel of serum biomarkers including seven cytokines diagnostic for cGVHD was analyzed and showed significantly lower levels of BAFF and CXCL10 in patients with persistent cGVHD. In conclusion, standardly accepted clinical measures of disease severity may not accurately reflect disease activity in patients with persistent cGVHD. However, many patients with persistent cGVHD are still receiving systemic immunosuppression despite lacking evidence of disease activity. Development of reliable clinical biomarkers of cGVHD activity may help guide future systemic treatments.     

Alteration of Root Growth by Lettuce,Wheat, and Soybean in Response to Wear Debris from Automotive Brake Pads

Brakes from motor vehicles release brake pad wear debris (BPWD) with increased concentrations of heavy metals. Germination and root-elongation assays with lettuce, wheat, and soybean were used to provide an initial evaluation of the phytotoxicity of either a water extract of BPWD or BPWD particulates. In terms of germination, the only effect observed was that lettuce germination decreased significantly in the BPWD particulate treatment. Lettuce and wheat showed decreased root length and root-elongation rate in the presence of the BPWD particulates, whereas lettuce produced a significantly greater number of lateral roots in response to BPWD extract. There was no significant effect of either BPWD treatment on soybean root elongation or lateral roots. Treatment with BPWD extracts or particulates caused significant alterations in the bending pattern of the plant roots. These initial results suggest that BPWD may have effects on the early growth and development of plants.     

The role of genetics and epigenetics in the pathogenesis of gestational diabetes mellitus

Diabetes mellitus (DM) is a heterogeneous group of disorders whose common trait is chronic hyperglycemia. Gestational diabetes mellitus (GDM) is one of the subtypes of DM that manifests during pregnancy. It is believed that 2%–5% of pregnancies worldwide are complicated with GDM, with the prevalence having significantly increased over the last decade. While the pathogenesis of the disease remains largely unknown, GDM is believed to be a result of interactions between genetic, epigenetic, and environmental factors. Linkage and association studies, including those that are genome-wide, have allowed us to identify complex genetic and epigenetic mechanisms that lead to the development of GDM. Multiple common variants in candidate genes such as potassium inwardly rectifying channel subfamily J, member 11 (KCNJ11), glucokinase (GCK), or hepatocyte nuclear factor 1α (HNF1A) have been found to increase the disease risk. In this review, we provide a detailed overview of the current knowledge concerning the influence of genetics and epigenetics on the development of GDM.     

Study of Wear Phenomenon of a Dental Milling Cutter by Statistical–Mathematical Modeling Based on the Experimental Results

The wear phenomenon of a dental milling cutter is studied based on experimental results and data and validated by statistical–mathematical modeling. The results of the statistical–mathematical modeling by the interpolation of the experimental results (data) regarding the wear of the dental milling cutter analyzed and obtained in the work process are presented in this paper. These results (data) are important because they lead to polynomial functions which by interpolation approximate very well the dependent parameter, specifically the wear process (mass lost due to dental milling cutter wear, m_w), considered in the experimental program. The polynomial interpolation functions are valid, only during the experimental testing range of the dental milling cutter, to describe the wear phenomenon; the extrapolations do not lead to satisfactory results. However, by using a controlled interpolation function with an exponential component, the extrapolation of the results is possible. Therefore, the purpose of this paper is the statistical–mathematical modeling by the interpolation of the experimental results of the mass lost due to dental milling cutter wear, m_w, using the deterministic differential model for the work process of it. Thus, interesting conclusions can be drawn relating to the phenomenon. In support of these statements come the results of the statistical–mathematical modeling by the interpolation of the experimental data obtained in the work process of the dental milling cutters, leading to practical applications, such as the extension of the life of dental milling cutter, useful even for its operation optimization; determination of possible criteria for replacing the worn dental milling cutters; the extension of the life of the materials from which dental milling cutters are built; or the provision of ideas for constructive solutions. Based on the modeling results by interpolation, it was found that the dental milling cutter during the milling operation works with high efficiency (mass loss due to wear is very reduced) in the first 11 h of operation, i.e., about a 10% increase in lifetime. After 11 h of operation, mass loss due to wear of the dental milling cutter increases relatively exponentially; thus, it is recommended that, in the normal way, the dental milling cutter be replaced with a new one to ensure high standards of materials processing.     

Microstructure and Mechanical Properties of Ti-25Nb-4Ta-8Sn Alloy Prepared by Spark Plasma Sintering

As the commercially most-used Ti-6Al-4V alloy has a different modulus of elasticity compared to the modulus of elasticity of bone and contains allergenic elements, β-Ti alloy could be a suitable substitution in orthopedics. The spark plasma sintering (SPS) method is feasible for the preparation of materials, with very low porosity and fine-grained structure, leading to higher mechanical properties. In this study, we prepared quaternary Ti-25Nb-4Ta-8Sn alloy using the spark plasma sintering method. The material was also heat-treated in order to homogenize the structure and compare the microstructure and properties in as-sintered and annealed states. The SPS sample had a modulus of elasticity of about 63 ± 1 GPa, which, after annealing, increased to the value of 73 ± 1 GPa. The tensile yield strength (TYS) of the SPS sample was 730 ± 52 MPa, ultimate tensile strength (UTS) 764 ± 10 MPa, and ductility 22 ± 9%. Annealed samples reached higher values of TYS and UTS (831 ± 60 MPa and 954 ± 48 MPa), but the ductility decreased to the value of 3 ± 1%. The obtained results are discussed considering the observed microstructure of the alloy.     

Role of Beta-Carotene in Lung Cancer Primary Chemoprevention: A Systematic Review with Meta-Analysis and Meta-Regression

Lung cancer is one of the most common neoplasms globally, with about 2.2 million new cases and 1.8 million deaths annually. Although the most important factor in reducing lung cancer risk is lifestyle change, most patients favour the use of supplements, for example, rather than quitting smoking or following a healthy diet. To better understand the efficacy of such interventions, a systematic review was performed of data from randomized controlled trials concerning the influence of beta-carotene supplementation on lung cancer risk in subjects with no lung cancer before the intervention. The search corpus comprised a number of databases and eight studies involving 167,141 participants, published by November 2021. The findings indicate that beta-carotene supplementation was associated with an increased risk of lung cancer (RR = 1.16, 95% CI = 1.06–1.26). This effect was even more noticeable among smokers and asbestos workers (RR = 1.21, 95% CI = 1.08–1.35) and non-medics (RR = 1.18, 95% CI = 1.07–1.29). A meta-regression found no relationship between the beta-carotene supplementation dose and the size of the negative effect associated with lung cancer risk. Our findings indicate that beta-carotene supplementation has no effect on lung cancer risk. Moreover, when used as the primary chemoprevention, beta-carotene may, in fact, increase the risk of lung cancer.     

Metabolism and Health Effects of Rare Sugars in a CACO-2/HepG2 Coculture Model

Non-alcoholic fatty liver disease (NAFLD) has become the most prevalent liver disease worldwide and is impacted by an unhealthy diet with excessive calories, although the role of sugars in NAFLD etiology remains largely unexplored. Rare sugars are natural sugars with alternative monomers and glycosidic bonds, which have attracted attention as sugar replacers due to developments in enzyme engineering and hence an increased availability. We studied the impact of (rare) sugars on energy production, liver cell physiology and gene expression in human intestinal colorectal adenocarcinoma (Caco-2) cells, hepatoma G2 (HepG2) liver cells and a coculture model with these cells. Fat accumulation was investigated in the presence of an oleic/palmitic acid mixture. Glucose, fructose and galactose, but not mannose, l-arabinose, xylose and ribose enhanced hepatic fat accumulation in a HepG2 monoculture. In the coculture model, there was a non-significant trend (p = 0.08) towards higher (20–55% increased) median fat accumulation with maltose, kojibiose and nigerose. In this coculture model, cellular energy production was increased by glucose, maltose, kojibiose and nigerose, but not by trehalose. Furthermore, glucose, fructose and l-arabinose affected gene expression in a sugar-specific way in coculture HepG2 cells. These findings indicate that sugars provide structure-specific effects on cellular energy production, hepatic fat accumulation and gene expression, suggesting a health potential for trehalose and l-arabinose, as well as a differential impact of sugars beyond the distinction of conventional and rare sugars.